(approx) 30 Minutes
Simple installation for anyone.
The SR Performance Leather Shifter Boot is a perfect option for any '94 to '04 Mustang owner who wants to replace a worn out or ripped up factory boot to restore the interior to look as factory fresh as possible. Now this is a super affordable one at just around 50 bucks, and it's super easy to install, which is why I'm giving it one out of three wrenches on our difficulty meter, which I'll talk about later on. Look after 20-plus years of daily driving, track runs, burnouts, hard shifting, and God knows what else, the interior can absolutely take a beating and become pretty worn out. SR Performance has made an exact reproduction of the stock leather shifter boot so you don't have to worry about picking up a cheap, low quality leather replacement somewhere else. These are great for both automatic and manual Mustangs. So no matter what SN-95 or New Edge you've got, you can still have a reliable factory leather shifter boot. Now it was made from a high-quality full green leather with hand-stitched seams. It also comes with the retaining plate underneath from stainless steel which has been zinc plated to prevent rust, so it stays shiny and attractive for years like the stock stuff. Now you can grab the set for just about 50 bucks. Like I just said, which again I don't think is too bad considering a direct replacement from Ford would probably cost you a lot more because OEM stuff normally does. The insulation is absolutely a no-brainer. Just about anybody can do it in say 10 or 15 minutes in the driveway at home. You don't even need any crazy hand tools or full mechanical knowledge on deck. All you need to do is carefully pop off the interior trim piece that connects your center console to the radio trim area right around the shifter. And once that's off, twist off your shift knob which, of course, just screws on normally, and you can pull off the leather shifter boot which is gonna come with the retaining plate attached to it. Now from there all you have to do is swap over the SR Performance Leather Boot with the stainless steel on the bottom. Snap it into place, of course. Put it right on over your stock or aftermarket shifter. Doesn't matter, it works for almost anything. Screw on your top shift knob. Pop on the plastic trim and you're good to go. With that said, not too hard, one out of three wrenches on our difficulty meter. Just to wrap things up, if you're the owner of a '94 to '04 Mustang you might want to check out the SR Performance Leather Shifter Boot, which is available right here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 20, 2020
This boot is perfect replacement for the one I have. Good price for hand stitched leather.Helpful (0)
December 28, 2019
No problem to install
Took about 6 min, I like the style. It replaced my old boot just fine.Helpful (0)
August 24, 2019
Glue on the boot falls off instantly and doesn't hold together. Also, does not come with anything to secure onto old plastic bezel. Dont buy this product by itself. Buy the one that comes with the replacement plastic bezel in order for you to properly use. Factory plastic bezel is melted to secure boot and when taken off it is no longer useable.Helpful (2)
August 16, 2019
Leather shifter boot
My old shifter boot was torn and coming apart so I needed to replace it. I got this and I am very happy with the appearance and fit. Looks much better than the factory fake leather boot!!Helpful (0)
June 28, 2019
It's a boot.
Leather boot, seems like decent quality. Hardest part was getting the tabs of the trim piece attached - that was a bit of a nightmare, but not the fault of the shift boot. A little expensive considering you probably will need the trim piece as well. (Small plastic tabs on bottom of that had all been broken on mine by a garage.)Helpful (0)
June 22, 2019
The boot looks fantastic, great quality and perfect fit. I recommend this product.Helpful (0)
June 11, 2019
Fits like original
Fit easily and looks way better than my ratty old boot.Helpful (0)
May 17, 2019
Good leather, works as should. little pricy but works as should.Helpful (0)
May 16, 2019
quality material, but does not attach to top of transmission, lays loose . Customer service advice did not have knowledge of this product.Helpful (0)
May 09, 2019
Great Replacement / Needs Mounting Help
This is a high quality leather shift boot. Replaced an old one in my Mustang that was damaged. However, the plastic mounts for the old one were melted down and broke upon removal of the old one. Since there is no mounting material with the shifter boot, I had to rig something up with tape and adhesive. Needs a lower ring to help the install.Helpful (0)
E-Brake? The leather around my e brake is all cracked and destroyed, do you think I will be able to use this as a substitute for the leather around the e brake? Thanks.
i wouldn't count on it fitting since it's made for the shifter.
Would this boot be able to screw in over an automatic transmission shifter?
Hi, we cant guarantee that this Leather Shifter Boot would be able to fit over the automatic shifter handle
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box
Fits Manual Mustangs only