Win A 2018 RTR Spec 3 Mustang! Enter Now!
Talk to a Mustang Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Front & Rear Side Marker Light LED Conversion Kit (10-14 All)

Market Price $62.99 You Save 13% ($8.00)
Our Price


FREE Shipping
  • Item 49173
In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Improves Appearance and Safety
  • Power Saving 5050 SMD Technology
  • Bright White Color
  • 5-LED T10 Style Wedge Base Light Bulb
  • Kit Includes 4 LED Bulbs
  • Fits All 2010 to 2014 Mustangs

Review & Installation Video

Review & Install Video

Hey I’m Justin with, and I’m checking out some modern LED lighting from Raxiom for all 2010 and newer Mustangs. Raxiom is without a doubt the industry leader in producing cool and stylish lighting specifically for your late model Mustang. Interior or exterior, retro or modern, Raxiom has something for your ride. The LED lighting I’m checking out here are the license plate LEDs, front/rear side markets, reverse light conversion kit, and finally the switchback turn signal conversion kit. So what are some of the benefits of going with LED lighting, well for one, they look much better, these LEDs shine bright white with a small touch of blue as opposed to the dim, yellowish look of incandescent bulbs. Not only will this bright light look good and help your appearance, but it’s also going to help your safety by increasing your visibility. Finally, LED lighting lasts much longer than your standard automotive bulbs, and it also uses less power. The majority of LED lighting acts like a standard bulb meaning it’s either on or it’s off, with the exception of these switchbacks. These lights turn from bright white to amber then back again, thanks to the included resistors. Just a cool little feature that adds a little more styling to the front of your ride. With the exception of the switchbacks, all these LED bulbs install easily in about 15 minutes per set with no modification needed, simply unplug the factory bulb and plug the Raxiom bulb in its place. As for the switchbacks you will need to splice in the included resistors, which will stretch the install time slightly to about 30 minutes. So if you’re looking to add the unique glow of modern LED lighting to your ride, then check out these different lighting options available from Raxiom, right here at

Improves Appearance And Safety. Improve the appearance and safety of your Mustang by installing a Side Marker LED Conversion Kit. This conversion kit replaces those weak incandescent stock bulbs with super bright white LED's, so you will be sure to be seen.

Power Saving 5050 SMD Technology. The bulbs included in this LED Conversion Kit utilize 3-chip 5050 SMD technology to produce super bright light while only consuming 1/10th of the power of the stock incandescent bulb. These LED bulbs are rated at 100,000 hours of continuous use.

Application. This Front and Rear Side Marker Light LED Conversion Kit is specifically designed for use on the 2010 to 2014 Ford Mustangs, including the V6, GT, Boss, and Shelby GT500 models. This kit replaces 168, 194, 158, 2825, 192, and 211-2 series bulbs.

Fitment: 2010 2011 2012 2013 2014 Details

What's in the Box
  • (4) Sidemarker Bulbs
    Hardware included:
  • None Required
Installation Info
Tech Specs
Will it fit my Mustang?
  • Boss 302 - 12, 13
  • V6 - 10, 11, 12, 13, 14
  • GT - 10, 11, 12, 13, 14
  • GT500 - 10, 11, 12, 13, 14

People Who Bought This Item Also Bought

Most Helpful Reviews

Not a good product

I installed them yesterday and they all worked and looked great. Today two of them stopped working already. It was the side of the car that has been in the sun all afternoon while I was at work but that ...

Read More
Helpful (13)

Nice Look!

The rear LED's look nice, but with the tint I have on my side marker lights, you really can't tell any difference. The rear lights were easy to change. I still haven't replaced the front lights as they ...

Read More
Helpful (6)

Overall Rating 3.8 out of 5 stars
Read All 19 Reviews

Customer Photos (12) Submit Your Photo

View All 12 Photos

You Might Also Like

1 Questions / 6 Answers

Ask a Question

Does the front and rear bumper need to be removed? If I install these lights will I have to take-off the front and rear bumpers?


  • Neither bumper needs to be fully removed. For the rear lights, they simply pop out if you use a flathead screwdriver wrapped in a rag. If you don't feel comfortable with that, remove the 3 fasteners in the wheel well and the 2 pushpin fasteners on the bottom portion of the bumper. This will give you enough wiggle room to reach the back of the light housing. As for the front, remove the two fasteners in the wheel well and carefully pull the bumper away from the rest of the car. This will release several clips holding the bumper to the car. At this point you'll be able to reach in behind the light housing and replace the bulb.


Show 5 more answers Helpful (0)

More Products You Might Like

Customer Reviews (19) Write a Review

Overall Rating 3.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Visibility 4.210526 4.2
  • Fit 4.947369 4.9
  • Appearance 4.31579 4.3
  • Bang For Your Buck 3.421053 3.4

  • 1/5

    Installation Time: Less than 1 Hour

    July 30, 2012

    Not a good product

    I installed them yesterday and they all worked and looked great. Today two of them stopped working already. It was the side of the car that has been in the sun all afternoon while I was at work but that should not have had an affect on the lights. I would save your money and keep the stock lights. What a waist of money.


    Year: 2012 Submodel: Boss Colorado Springs, CO

    Helpful (13)

    • Response from AmericanMuscle

      Yeah you're right, the sun didn't have anything to do with the bulbs. I'm sorry they were defective but we can definitely get you a replacement sent out. Give us a call at your earliest convenience and we can ship them out for you!

      Lisa , Customer Care

  • 5/5

    Installation Time: Less than 1 Hour

    September 22, 2012

    Nice Look!

    The rear LED's look nice, but with the tint I have on my side marker lights, you really can't tell any difference. The rear lights were easy to change. I still haven't replaced the front lights as they seem more complicated and I haven't had the time to change them out yet. Nice upgrade to LED's, but like I said, with the smoked tint, you really can't tell any difference.


    Year: 2012 Submodel: V6 Arlington, VA

    Helpful (6)

  • 5/5

    Installation Time: Less than 1 Hour

    May 18, 2012

    Easy Upgrade

    Product met expectations. Coupled with the smoked front markers and these Raxiom LED's really shine (white). They look incredible and are definitely brighter than the lousy stock bulbs. The installation is quite simple with just a few hand-tools. Just have to becareful when inserting them into the housing (sidemarker) not force them in and do not over-turn/tighten, otherwise they will easily snap in half. Worth the few bucks, in my opinion!


    Year: 2012 Submodel: GT Michigan

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    March 15, 2017

    Quarter Lights

    More excellent lighting products from Raxiom. They don't make a HUGE difference but they are definitely noticeably brighter, and give a better look to the Mustang. Well worth the money.


    Year: 2010 Submodel: GT

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    June 12, 2015

    Simple and good looking

    this item took me only a few minutes to install and it looks great on the car. It looks much better then the stock yellow lights!


    Year: 2012 Submodel: V6 Downingtown, PA

    Helpful (3)

  • 3/5

    Installation Time: Afternoon

    September 24, 2013

    2014 Shelby

    The front bulbs installed rather easily. I installed mine while I upgraded the fog lights to LEDs. They are a bit brighter, but not really noticeable from the casual observer. The rear bulbs were a huge pain to install. You are supposed to be able to pry forward on the rear lens with a screwdriver between the lens and the bumper cover to remove the assembly. Mine wouldn't budge and I didn't want to scratch the paint. I ended up removing some screws in the rear wheel well area and partially taking the rear bumper cover off to install them. The increased brightness isn't really noticeable to the casual observer. I would recommend led license plate bulbs, map lights, trunk light and fog lights for an upgrade, but these, not so much.


    Year: 2014 Submodel: GT500 Wisconsin,USA

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    March 31, 2017

    LOVE IT!!!!

    It's very good and bright plus it changes the look because I have the front blacked out signals as well great combo!


    Year: 2014 Submodel: GT

    Helpful (2)

  • 1/5

    Installation Time: Less than 1 Hour

    March 08, 2016


    install was easy enough, but within 24 hours - one LED bulb was out and within 72 hours, both bulbs were out. What a waste. I ended up going to a local automotive store and purchased a different brand LED set for $13. They are working great! Raxiom is a waste of money IMO.


    Year: 2014 Submodel: GT

    Helpful (2)

  • 1/5

    Installation Time: Afternoon

    June 04, 2015

    Raxiom LED Turn Signals - DO NOT BUY!!!!!

    Purchased these 6 months ago, already replaced them once and AGAIN they are DEFFECTIVE. They start to blink erratically after just a month or so. I will be replaceing them once again with the stock incandescent bulbs. THESE ARE DEFINITELY NOT WORTH THE HASSLE OR EXPENSE.


    Year: 2013 Submodel: V6 Raleigh, NC

    Helpful (2)

  • 4/5

    Installation Time: Afternoon

    October 08, 2014

    Nice but a little complicated.

    The rear side markers are cake to install. Just pop them loose with a screwdriver and replace. Easy as that. The rear side LEDs are a little brighter than the incandescent, but not a lot due to the red lens housing. The front install was easy and hard. I only removed one bolt each and just stuck my and in there to remove the housing. The passenger was cake as the cord was just long enough to sneak out the plastic. The driver side one I paid dearly for only taking one bolt out. Had to install the driver side front one handed but I got it done. The front LEDs are 2x brighter and I like the look of them.


    Year: 2012 Submodel: GT Omaha, NE

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    January 04, 2014

    They're ok

    My side markers aren't tinted. These bulbs definitely made a difference but were only marginal compared to the rest of the LED lights I got. I think having the side markers brighter and sharper looking was a necessity with the other lights brighter. Installation in the back was extremely easy as others said. Just pop out the lens from the outside and replace. The front on my 2010 V6 was pretty easy but did require more work. It sounds like there are a few ways to get to the bulbs to change them. I chose to jack the car up and take the front wind deflector off the underneath. It was around 10 screws holding it on. After that it was very easy, just reach up and replace them. I'm not sure but it seems like the lights might be directional. Out of all the bulbs I changed, there were a few that didn't come on the first time. I noticed when I took it out and turned it around it came on.


    Year: 2010 Submodel: V6 Maryland

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    July 14, 2013

    Side Marker LED

    The front side markers look great with the LEDs, but the rear looks the same basically. I would still get these because they are LED so you know they wont burn out, but I'm just disappointed with how the rear turned out. Still overall a good product.


    Year: 2013 Submodel: V6 Plano, TX, USA

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    December 22, 2012

    Raxiom LED marker lights

    Well worth the money spent.Lights are a considerable amount brighter. Also perchased license plate LED conversion kit and this lihgts up the plate twice as much from weak stock bulbs.


    Year: 2010 Submodel: GT Wisconsin

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    October 03, 2012

    Led lighting

    Looks a lot brighter at night than the stock bulbs.


    Year: 2010 Submodel: GT500 Irving, TX, USA

    Helpful (2)

  • 2/5

    Installation Time: Less than 1 Hour

    September 04, 2012

    Not what i expected

    probably would look better if you got different housings(ie not amber in the front). these LED's done fill the side markers with light like i thought they would. but its nice to have LEDs instead of regular bulbs


    Year: 2012 Submodel: GT Covington, LA, USA

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    July 16, 2012

    Expensive but worth it

    I installed these in no time at all and they look amazing. Especially if you have clear side marker housings. My only complaint is that both of the back lights on the first day I installed them just stopped working. But AM sent me a whole other set the same day no problem. They are very expensive but if you have the money I would definitely suggest it. Raxiom's 2 year warranty is unbeatable.


    Year: 2011 Submodel: V6

    Helpful (2)

  • 2/5

    Installation Time: Less than 1 Hour

    June 06, 2017

    Not what I was expecting

    Not a hard install but I was unimpressed with the results. I have tinted lenses and I purposely installed them on one side so I could compare them to the original bulbs. They were no brighter than the original bulbs they were just whiter. The front side-markers went from a nice amber to a light pale yellow, and now no longer match the turn signals. I noticed no difference in the rear. I feel that since only one led panel actually faces out that is the only source of light being projected out of the lens. The light from the other 4 LEDs get lost in the lamp assembly. If there was a mirrored reflector in the assembly the result might be greater. I took them out and am very disappointed.


    Year: 2014 Submodel: V6

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    February 08, 2013

    LED marker lights

    The LED marker lights are definetly much brighter then the stock lights. The lights take some time to get to but they look good when it is done.


    Year: 2011 Submodel: GT Lawrenceburg, IN, USA

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    April 22, 2013

    Front and Rear Marker Lights

    Rear lights were a snap. Just pop the cover off and swap out the bulbs. The front lights were another story. What worked for me is taking a few screws out of the front and bottom of the wheel well shroud so I can move the shroud enough to get my hand in there behind the bulb housing and remove it so I could change out the bulb. If it doesn't turn on rotate the bulb 180 and reinsert it. I have stock side marker covers and with the LED's they are a little brighter.


    Year: 2013 Submodel: GT Sandy, OR, USA

    Helpful (0)

Related Mustang Categories