Win $5,000 For Your Mustang! Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Raxiom Halo LED Tail Lights (15-17 All)

Market Price $549.99 You Save 9% ($50.00)
Our Price

$499.99 (pair)

FREE Shipping
  • Item 393412
  • MPN# 393412

Out of Stock Notify Me Choose options to add to cart

Features, Video & Details

  • Modern LED Technology
  • Unique, Protruding Style
  • Round Halo Brake Light
  • Gloss Black Finish
  • Red Lenses with Red Lighting
  • Plug and Play Installation
  • Direct Replacement
  • 2-Year Full Warranty
  • Sold as a Pair
  • Fits All 2015-2017 Mustangs

Review & Installation Video

Review & Install Video

Hey, what's going on guys? Adam here with AmericanMuscle.com. Today I'm bringing you a detailed overview of the new Raxiom Halo LED tail lights fitting all 2015 and newer Mustangs. So in this video we're touching on the styling and appearance you can expect when picking up the all-new Raxiom Halo LED tail lights, as well as the materials and construction. And I'll even take you through the installation which I'll tell you upfront would be an even swap getting it a one out of three wrenches on the difficulty meter. So let's jump right into it. The Raxiom Halo LED tail Lights are gonna be for the 2015 and newer Mustang owner out there looking to completely change the look of their rear profile of their S550. Taking those rear tri-bar lights that we all know and love, and giving it a very, very redesigned super car styling. Now those tri-bar tail lights we all know and love are the iconic trademark of the Mustang family. And have been here since the beginning in the mid-60s. But like all good things, it is sometimes good to switch it up and give it a new design. And that is exactly what Raxiom did here with this halo LED lights for the new S550. Now the new halo LED lights styling you see here is a more modern race design, inspired by those super cars you may see hitting the market here upcoming in 2017. Now with that said, these are originally found on those Lamont track stylings with aerodynamics incorporated into the lights. Beneficial for those rear engine models. So as you can see these halo designs here are a lot different than some of the halo designs Raxiom has put out in the past. Instead of this being a single LED halom this is an actual 3D halo protruding out of the OEM material backing with high output LEDs all around the ring. And it's being pushed forward by the rib design you see here and on the inside above the deck lid panel as well. Now if you look in the center of the actual halo you'll see a honeycomb style design. Now with that in mind, plus the rib style design on the side here and on the inside by the deck lid panel, you will see that this was originally an aerodynamic opening for those rear engine models. Very beneficial, improving air flow. Now of course, this will not be the case with the Mustang. Given it's a front engine pony. But of course, this one did keep the design staying true to that super car styling and that track feel. Now along with the actual halo itself being made out of OEM materials, you can expect the same for the backing here, the mounting on the rear. As well as a direct plug and play wiring on the back. Everything will plug in just like your factory tail lights would. And like I said they will blend in perfectly with the S550 like a pro. Now that backing I mentioned here, you can see it's a very glossy attractive black finish here. It's got a matte like texture designed for the connecting pieces into your trunk and deck lid panel. And then again a very simple plug and play installation here, will clip right into your factory wiring harness already in the vehicle. And of course, I do want to point out this one will be compatible with the sequential harness. The only thing that won't work is your break lights with the sequences. But again, if you have the sequences already in your Mustang, you can reuse those again with the new Raxiom Halo LED designs here. Now pricewise, if you are interested in completely redesigning the rear end look of your S550. Expect to be spending just around $500. A pretty expected price tag when it comes to redesigning these tail lights. If you take into consideration this price compared to a factory rear placement from Ford, or even an aftermarket one. You're spending upwards of a grand. This cuts the price tag in half. Completely redesigns the tri-bar tail light. And you will without a doubt standout at those car shows or car mates, and you're gonna turn heads on the street as well. Now again, switching gears over to that installation process I mentioned earlier. This one is another bonus to picking up the Raxiom Halo LED tail lights to redesign that rear end. This installation is going to be that direct plug and play. I know I mentioned it a bunch of times, but I do want to stress that it will work directly with your factory wiring harness in the vehicle. And it will even work with a sequential harness if you have that as well, will plug right into these. So to kick things off let me walk you through that installation. You're gonna want to remove your factory tail lights first and foremost. In order to do that you want to pop your trunk open, remove the liner on the inside of the deck lid panel, as well as the two sides covering the tail lights. Unbolt those tail lights, unclip the wiring harness, and remove them from the vehicle carefully. So one thing you will have to do when you remove your factory tail lights is remove the top plastic piece on the factory lights, and move them over to the Raxiom halo design. This is basically the top piece that's gonna connect the top of your tail lights to the bottom of your trunk lid. Basically what the trunk lid shuts on. But you will have to move it over from the factory. Now once you get those two connecting pieces onto each of the tail lights, it'll be as simple as feeding your wiring harness to the predrilled hole in the bottom of your vehicle. Putting them through, bolting them back on, connecting the harnesses and, of course the sequentials if you have those as well. Put the lining all back together on each side and behind the deck lid panel. Shut everything down and you're good to go. Overall I'd say you'll be spending between 30 minutes and an hour, depending on how familiar you are with the process. Extremely simple, something anybody can do with about 30 minutes in the driveway at home. Definitely something that's getting a one out of three wrenches on our difficulty meter. Well guys just to wrap things up, if you are the owner of a 2015 or newer Mustang. And you're interested in completely changing the tri-bar look of the rear end of your pony, you might wanna check out the Raxiom Halo LED tail lights available right here at AmericanMuscle.com.

Halo LED Tails. There's no question that most car enthusiasts at some point think about how they can modify or change the factory lighting. The S550 Mustang definitely came with some tricked out tail lights right off the assembly line, but if you really want to stand out, these Raxiom units are for you. Designed to provide brilliantly bright LED light, these tails feature round halos of illumination to really grab the attention of distracted drivers. Being plug and play, this pair of Halo LED Tail Lights will bring a new visual appeal to the rear of your Pony with very little effort.

Quality Construction. Crafted from the highest quality materials, this set of two Raxiom Halo LED Tail Lights feature a gloss black finish and red brake lights. With its unique style, the tails stick away from the body lines of your S550 and deliver a protruding round halo of LED light. Turn heads and get noticed on the roadways with this long lasting and bright tail light upgrade.

Plug and Play. Installing this modern LED Tail Light upgrade could not get any easier. Simply remove your current tail lights and disconnect the wiring, plug in the supplied wiring of your new Raxiom Halo LED Lights and reinstall. It's a simple upgrade using basic hand tools and should take no longer than a half hour to complete.

Full Warranty. Raxiom stands behind their products and backs these Halo LED Tail Lights with their Industry Leading 2-Year Full Warranty.

Recommended Upgrade. While the direct install of these Raxiom Halo LEDs will be compatible with the factory turn signal sequencing, they do not add the sequential technology when braking, using hazards or locking/unlocking your Mustang. To enjoy full sequential technology for all brake functions, combine these tail lights with the Raxiom Tail Light Sequencer. Please see ordering options above.

Application. This pair of Raxiom Halo LED Tail Lights are specifically designed for the 2015-2017 Mustangs, including V6, GT, EcoBoost and GT350 models.

Please Note. This is a product designed for Mustangs sold in the US. It will not function properly on Mustangs sold in the EU or UK without modifications being made to the wiring harness.

Fitment: 2015 2016 2017 Details

What's in the Box
  • (2) Tail Lights
  • Plug and Play Wiring Harness
Installation Info
Tech Specs
Will it fit my Mustang?
  • EcoBoost - 15, 16, 17
  • GT - 15, 16, 17
  • GT350 - 15, 16, 17
  • V6 - 15, 16, 17

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Completly changed the look!

Awesome lights, looks and feels great quality and super easy install, all I needed was a beer and a 10mm and it took 15 min. The only thing I would of liked to be included would of been a plastic trim ...

Read More
Helpful (3)

5/5
New look for the S550

I will have to start of by saying, I love to stand out from the crowd. When I saw these, I was hooked. Don't get me wrong, I love the stock taillights. But this was a nice change that didn't look over ...

Read More
Helpful (2)

Overall Rating 4.5 out of 5 stars
Read All 32 Reviews

Customer Photos (47) Submit Your Photo

View All 47 Photos

You Might Also Like

19 Questions / 6 Answers

Ask a Question

Hi Can i use this lighs in Germany are they allowed?Or do I need special Papers for this lights? Thanks

StellaC

  • Unfortunately since we are a US based company, we don't have much info on German laws such as those for tail lights, We would recommend checking with a local shop, or police force if the Raxiom Halo LED Tail Lights would be legal in your area.

    Rob D

Helpful (0)

My neighbors leaked and filled up with water in less than 2 months. The same thing happened to a member in out Mustang club. Has this issue been resolved yet?

Bubba

  • The seals on a number of lights when originally released were susceptible to water leaks and created a bit of an issue. We have covered all of them under warranty and the seal issue has since been fixed. We still recommend using silicone around the light housing as an extra precaution but is not a necessity.

    AMKody

Helpful (0)

For the lights to turn as it does in the video do we need to also purchase the, Raxiom Tail Light Sequencer?

Jessica

  • These light will sequence as shown in the video without any additional components.

    AMJEFF

Helpful (0)

Hi does this fit the mustang in New Zealand ? It's a little bit different between the models in us n nz. Thanks

HungT

  • These Raxiom Halo LED Tail Lights were designed for Mustangs sold in the US only. For installation on Mustangs sold in the EU or UK will require modifications being made to the wiring harness.

    AMJEFF

Helpful (0)

I drive a right-hand-drive 2017 Mustang GT Manual. Will these tail lights fit?

FrancisL

  • The Raxiom Halo LED Tail Lights have not been tested on a right hand drive Mustang, so we cannot confirm fitment.

    Rob D

Helpful (0)

It says 15-17 but also says 'All', so can these be installed on an O7 as well? Honestly the only lights I like, would be a shame if they're only possible on the newer models.

Kokennin

  • These tail lights will fit the 15-17 V6, GT, GT350 and Ecoboost Mustangs.

    AshleyK

Helpful (0)

More Products You Might Like

Customer Reviews (32) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Less than 1 Hour

  • Visibility 4.8 4.8
  • Fit 4.4 4.4
  • Appearance 4.733333 4.7
  • Bang For Your Buck 4.266667 4.3



  • 5/5

    August 13, 2016

    Completly changed the look!

    Awesome lights, looks and feels great quality and super easy install, all I needed was a beer and a 10mm and it took 15 min. The only thing I would of liked to be included would of been a plastic trim removal tool but it was easy enough when I found mine. Would buy it again!! Thanks AM and thanks Raxiom!

    LA01Cobra

    Year: 2016 Submodel: GT

    Helpful (3)

  • 4/5

    August 06, 2016

    Easy installion!?!? Not if shaker is in trunk

    It was easy getting out the left tail light, but that right one isn't that easy if you have the shaker upgraded system.

    Kegboss

    Year: 2016 Submodel: GT

    Helpful (2)

  • 5/5

    July 26, 2016

    New look for the S550

    I will have to start of by saying, I love to stand out from the crowd. When I saw these, I was hooked. Don't get me wrong, I love the stock taillights. But this was a nice change that didn't look over the top. Easy install, took about 15 minutes. So far, build quality is similar to stock. I also purchased the sequential adapter . These lights look awesome.

    furiouss550

    Year: 2016 Submodel: GT

    Helpful (2)

  • 5/5

    July 24, 2016

    Best tailights ever !!!

    Installed them in less than 10 min it's super easy !!! Best item I've ever bought worth the money improves the back appearance 100 .

    Nate19

    Year: 2016 Submodel: GT

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    March 05, 2017

    unique looks

    i like being different in all things - these lights make my GT look just that way...different. Easy to install and they work great.

    drj

    Year: 2017 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    February 16, 2017

    Love them!

    They are super easy to install and they make your car stand apart from the tons of mustangs on the road. They are definitely worth it in my opinion.

    Maggie

    Year: 2015 Submodel: V6

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    February 04, 2017

    Way better than what I had.

    I bought these recently due to finding out my stock tail light wires were cut and spliced to fit in a UK light conversion for my USDM Mustang. I already loved the look of them and I couldn't be happier with my purchase. Raxiom really did something cool with these lights. They are just as bright as stock (if not brighter), and they retain the sequential turn signals. Money well spent in my opinion and a perfect fit. Didn't take me too long to install.

    TheWildman

    Year: 2016 Submodel: EcoBoost

    Helpful (1)

  • 4/5

    Installation Time: Less than 1 Hour

    January 27, 2017

    Great look, minor fit issue

    Easy install, great look, but did anyone have an issue with the trim fitting in the bumper slot. The metal clip would not line up with the bumper. They are replacing, maybe just an off pair.

    golfer05

    Helpful (1)

  • 3/5

    Installation Time: Less than 1 Hour

    January 10, 2017

    Moisture buildup

    Glad to see I'm not the only one with this problem. They sent me a new replacement part after I noticed water entered them the first time , But I just noticed today it's happening again. Really hope they do something about this !! I love the part though!!

    Gstang

    Year: 2015 Submodel: V6

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    December 07, 2016

    New look for my 2016 mustang

    Makes my mustang stand out, there's 5 2016 mustangs in my complex, but these lights makes mine unique. Love the design, the ease of the installation. Took less than 30 to switch them out. Glad I bought these, will buy from the site again.

    HeathrowPony16

    Year: 2016 Submodel: Ecoboost

    Helpful (1)

  • 3/5

    October 15, 2016

    Had to replace them once and now moisture again!

    Installed them in about 30 min and they look great! Only problem was after a couple of months I noticed water droplets on the passenger side light. Half of my lights went out! I quickly notified American Muscle and they sent me a replacement within the week! Unfortunately I have noticed now water droplets in the driver side light... I hope this will not be an ungoing issue with these light...

    Achilles7

    Year: 2016 Submodel: GT

    Helpful (1)

  • 4/5

    September 26, 2016

    Good

    Real easy installation took me 30 minutes at most. Takes a bit to get used to but it makes my car stand out from the rest!

    Chang12

    Year: 2015 Submodel: V6

    Helpful (1)

  • 5/5

    September 03, 2016

    Great Product!

    These are the nicest looking taillight change outs I have seen and really make the back stand out. Because they integrate so well with the panel the lights look like they were put on at the factory. A nice change to the ordinary tail lights. Anyone looking to make their car stand out I would recommend the Haxiom LED Tail lights.

    forgiven1

    Year: 2015 Submodel: GT

    Helpful (1)

  • 5/5

    August 10, 2016

    Great Product

    One of the great things about the Mustang is the ability to customize the look. These lights are simply amazing at creating a unique stang. The only annoying part is everyone thinks it is a Ferrari or something like that and you will notice people lurking behind you on the freeway staring at your car. Here is a link to the sequential blinker. https://www.youtube.com/watch?v=WKMSNxRKM0g

    Drock

    Year: 2015 Submodel: Ecoboost

    Helpful (1)

  • 5/5

    July 27, 2016

    Very nice product

    The fitment is nice - and instructions were super clear, the only thing I could think of that they could have included was the size of the deep socket to use to remove the stock taillights (10mm). Back to fitment - I noticed that the right taillight trim panel didn't seem to align as well with the center panel as the left taillight did - I may need to see if I can adjust it a bit. Overall, I like the look of the taillights, and think they flow with the back end nicely and are something 'different'. The plastic seems to be more prone to static electricity than the previous taillight panel - from the short drive from my house to the location where I shot the photos was only about 1.5 miles, and there was quite a bit of dust stuck to the panels - perhaps it's more due to the dry climate here, I'm not sure. Overall - very happy with these.

    cagecko

    Year: 2016 Submodel: Ecoboost

    Helpful (1)

  • 5/5

    July 26, 2016

    Easy install, looks amazing!

    Install took about 30 minutes. Plugged right into existing harness, also retains sequential turn signal!

    Jdgordon

    Year: 2015 Submodel: GT

    Helpful (1)

  • 5/5

    July 22, 2016

    Ford GT rear infused in the mustang

    Really nice design and very unique... I really like standing out from the rest.. Installation took me about 30 mins the hard part is removing plastic trim, just be carefull and you will get it out... I will recommend this product! Thanks Raxiom...

    Markrym

    Year: 2015 Submodel: Ecoboost

    Helpful (1)

  • 5/5

    July 14, 2016

    Just awesome

    My friend so how got these early, and we installed them super quick in the night. I'm sure he'll get a ton of compliments by morning because these look sleek as sin. Hopefully I'll get a pic of them up, but I'm sure they will come flowing in soon, these are amazing!

    Crow

    Year: 2016 Submodel: Ecoboost

    Helpful (1)

  • 2/5

    Installation Time: Full Day

    October 11, 2017

    Love The Looks Of The Lights...but

    In the middle of researching why I have water in one of the lights and only had about 3 months.

    MichaelP

    Year: 2015 Submodel: V6

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 22, 2017

    I think it goes faster now! ;)

    Love the look, definitely makes the car racier in appearance as these stand out like rocket boosters! Seems quite pricey would be the only drawback, particularly considering right behind the LED lens piece on both of mine there was a small hole that they seal with silicone, but do a quick blobby job and it was plain to see. This piece should've been rotated so the hole would be on the bottom. I was about to very disappointedly return them but decided to pare down the silicon blobs with a knife so they aren't noticeable. I have a paint pen in Tuxedo black on the way which I'll dab on the "clear" silicone to further blend it in. Otherwise build quality is great and paired with the louvers it looks even better!

    BlackFox

    Year: 2016 Submodel: GT

    Helpful (0)

Related Mustang Categories