(approx) 30 Minutes
Simple installation for anyone.
$119.99 (each)FREE Shipping
Hey, guys. Today, we're gonna be taking a look at and installing the Raxiom LED Smoked Third Brake Light for 2010 and 2014 Mustangs. This is a direct replacement for your factory third brake light. It is LED and it does have a smoked lens. It's going to be a little bit brighter than your factory third brake light it is. It cost about $120, and the install is a one out of three wrenches in the difficulty meter. We'll go ahead and show you how to get it installed on your car now.For this install, we'll used a Phillips head screwdriver and a body panel removal tool. All right, guys, to start the install, you'll pop your trunk and you need to remove this cover here. I have a body panel removal tool and I'll be pulling out the pushpins. All right, guys, so now we're going to disconnect our electrical connection and then we have three Phillips head screws that are holding the third brake light in place, after that, we'll be able to remove it. So, these are actually pushpins. So, the middle has a screw. You'll unthread the screw and once that's backed out, you're able to pull your clip out. All right, and now we can pull our light out. All right, guys. So here's your factory third brake light compared to the Raxiom third brake light. So, your factory third brake light is also LED just like the Raxiom third brake light is but you can see that the Raxiom third brake light does bring a different overall look other than just a smoked lens. Customers also note the Raxiom third brake light as being a little bit brighter than your factory third brake light. This is a direct replacement for your factory light, and it also has a weather-sealed housing, and it does come with Raxiom's two-year warranty. All right, guys, now we're ready to get the third brake light in place. What we're going to do is set it in place, and then there are clips down here that need to go into your trunk lid. And, then we'll take each of the three pushpins and then push them in place, obviously, reconnect our electrical connection, and that's really all it's going to take. So, as we get those lined up, we want to make sure that our tabs here clip into place. And they'll actually hold the third brake light for us. All right, now we'll get our pins in place. So, we'll connect our third brake light and then get our cover back in place. All right, so the first thing we'll do is we will fish our emergency latch through, and we'll go ahead and line up our holes and get our push pins in place. All right, guys, that's going to wrap up this review and install. Keep in mind you can always check this out more online, right here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2010 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 17, 2020
Looks great and is bright, only took 20 mins to installHelpful (0)
February 03, 2020
not a good value for money but best quality/look
ebay has a better bang for buck but this is the only one with an led bar inside so it is the most aesthetic way to go. excellent quality.Helpful (0)
December 29, 2019
just installed the third brake light. looks great and is really bright, but not really smoked. used third brake light tint to get the blacked out lookHelpful (0)
November 26, 2019
great product thanks
thanks for your bussines, we will buy more items from youHelpful (0)
November 16, 2019
Raxiom LED third brake light
Looks great, not as smoked/tint as they claim. Ordered the film to darken.Helpful (0)
October 24, 2019
Very cool look
I love this way more than the stock one. The clear lens and modern looking LED strip changes the look of the whole back end. Takes 10 minutes to install with a body pin tool otherwise theres a lot of clips to fish out by handHelpful (0)
September 23, 2019
Really easy to install and looks great. Old light was starting to fade so this was an easy purchase for me.Helpful (0)
July 22, 2019
Way Better Than Stock
Took about thirty minutes to install. Looks great during the day and at night. Worth every penny.Helpful (0)
June 21, 2019
This smoked third light adds much better styling to rear of car. Super easy to install. Do yourself and favor and pair this with the Raxiom Smoked Aero tail lights, you won’t regret it.Helpful (0)
June 14, 2019
Easy to install. Looks better than stock one. I recommend.Helpful (0)
What is the difference between this part and Part#405251?
The difference is going to be the LED light design setup. This option has one long LED strip, while the other option is a row of small LED bulbs.
I just purchased this light. Will this interfere with my radio when the brake is applied.
This should not interfere with the radio when the brake is applied.
I installed this brake light yesterday and am now getting static in my radio when pressing on my brake pedal. Do you offer a plug in resistor to stop this?
We do not currently carry a resistor for this application but a local auto parts store in your area should and this would clear up any issues.
Is the lens clear with smoke? That's what it looks like in the picture. I'm looking to match the side marker that are clear led.
Yes, the lens on this light is clear with a smoked look.
Hello, So if the OEM is LED and this one is LED.. Whats is the point of this light replacement than other than it's tinted? (I'm just curious)
The Raxiom Smoked LED Third Brake Light is designed to give you a full smoked replacement assembly, rather than applying a tint film, or spray tint. This will retain the LED lighting, just like stock.
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box