OPR Rocker Molding Retainers (99-04 All)

Customer Reviews (18) Write a Review

Overall Rating 4.1

out of 5 stars

• 3/5

  April 14, 2017

  Ok retainers

  Not exactly the same as the original but they should work

  ford4me

  Year: 2001 Submodel: GT

  Helpful (2) Thanks for your input!
• 5/5

  September 12, 2016

  retainers

  fast delivery. parts are as advertised. Quality and fit/function meet expectations

  JD

  Year: 2000 Submodel: V6

  Helpful (2) Thanks for your input!
• 5/5

  November 15, 2015

  Rocker molding retainers

  I ordered these retainer to replace my old broken ones and let me tell im glad i did. Not only are they direct OE replacement but are made to last and not dry up an break. It does both driver and passenger side rocker molding. Fast and easy to instally. I highly recommend them to any mustang enthusiast who has a flimsy rocker pannel or who like me literally broke them off.

  IvanVillagrana

  Year: 2004 Submodel: GT palm springs ca

  Helpful (2) Thanks for your input!
• 5/5

  March 21, 2014

  No more side pipes

  Had to get new rocker moldings for my 98 gt because I'm taking off the side pipes. I needed new clips and AM had exactly what I needed.

  Flimflam1987

  Year: 1998 Submodel: GT Haddon Heights, NJ, USA

  Helpful (2) Thanks for your input!
• 5/5

  July 04, 2013

  Rocker Moulding Retainers Purchase & Installation

  I found a set of rocker moulding retainers for my 2000 GT at American Muscle after searching unsuccessfully at my local auto supply stores and Ford dealership. American Muscle shipped the retainers within 3 days and was a perfect fit. After all said and done, I should have gone on line to American Muscle first and saved a lot of time and effort! Thanks American Muscle for solving my problem quickly with the right quality parts at a reasonable price with free delivery!

  Notforgotten

  Year: 2000 Submodel: GT Huntsville Alabama

  Helpful (2) Thanks for your input!
• 5/5

  May 17, 2013

  Rocker Molding Retainers

  The OEM quality of the rocker panels 14 piece kit that I ordered from American Muscle are just as great as factory OEM Retainers and thay worked perfectly on my 1999 Mustang I would recommend them to all my friends and family that own a 1999 thru 2004 Mustang...I was very happy with American Muscle quick delivery.. Thank you

  david201155

  Year: 1999 Submodel: V6 Flint, MI, USA

  Helpful (2) Thanks for your input!
• 5/5

  February 18, 2013

  Better then original retainers

  These molding retainers were thicker and more heavy duty then the originals that just broke when I tried removing them. Very good quality.

  Jerry10

  Year: 2002 Submodel: GT Tulsa, OK, USA

  Helpful (2) Thanks for your input!
• 4/5

  December 23, 2012

  Exactly what was expected

  Exactly what you'd expect from AM, at my door in no time at all and a great quality product. Looked identical to eom and installed with no issue at all. Recommend to anyone else who had an issue with a snow bank, lol.

  Wayne67

  Year: 2004 Submodel: GT New Haven, CT, USA

  Helpful (2) Thanks for your input!
• 5/5

  August 27, 2015

  perfect fit

  I bought these retainers because my rocker moldings where starting to come off, It made the car look ugly. The shipping was great it only took 4 days to get to my house and now my car looks clean and the moldings sit flush. American muscle is my #1 go to for mustang parts.

  balto

  Year: 2001 Submodel: V6 washington

  Helpful (1) Thanks for your input!
• 5/5

  June 13, 2015

  Rocker moulding retainers

  The retainers work fairly well, not an absolutely PERFECT fit, but what is. They get the job done and I'm very satisfied.

  Dakota

  Year: 2000 Submodel: GT Nanticoke, PA

  Helpful (1) Thanks for your input!
• 2/5

  July 16, 2014

  Didnt work

  I bought these because my old rocker panel was dented i got a new one and bought these clips to attach it but they were too big only the flat end ones fit.

  Dany92

  Year: 2004 Submodel: V6 Raleigh, NC, USA

  Helpful (1) Thanks for your input!
• 5/5

  September 05, 2013

  Must have

  This is a must have if you are replacing your rocker mouldings. The company I bought the mouldings from didn't sell the kit. A quick online purchase here and I had them in a few days. Excellent.

  AlaskaStang

  Year: 2004 Submodel: GT Alaska

  Helpful (1) Thanks for your input!
• 3/5

  June 11, 2013

  Ground effect hardware

  Clips fit good. Held the trim in place nicely. Unfortunately, the pushpins are too big so I had to use ones from a local auto part store.

  Mike822

  Year: 2001 Submodel: Bullitt Merritt Island, FL, USA

  Helpful (1) Thanks for your input!
• 4/5

  April 20, 2013

  Good Clips

  These are quality clips, but be aware. These will only reattach the long sections of the rocker panel. You will need 4 additional clips to attach the small sections on the front fenders. Still a good product, made from better plastic than the stock clips. I repainted all my panels and this did the trick to re attach.

  Foxone

  Year: 2001 Submodel: GT Sierra Vista, AZ, USA

  Helpful (1) Thanks for your input!
• 1/5

  October 01, 2017

  They are not the right size

  I tried to make them fit but just broke them. The holes our to small. And the retainers are just to thick. End up going to Oreillys for them.

  jorge79

  Year: 2003 Submodel: Mach 1

  Helpful (0) Thanks for your input!
• 5/5

  September 04, 2017

  Quick and easy

  Got the parts super fast. Just like one worked great

  ChrisC

  Year: 2003 Submodel: Cobra

  Helpful (0) Thanks for your input!
• 1/5

  March 10, 2017

  Too big

  These were significantly bigger than the original retainers. Didn't work. Had to re-use the old ones. Don't waste your money.

  MelC

  Year: 2003 Submodel: GT

  Helpful (0) Thanks for your input!
• 5/5

  September 19, 2014

  98 GT side skirts

  I took the side pipes off my car and needed these clips to put the OEM side moldings on. Cheap, quick delivery, and had my new moldings on for the weekend. Along with the LT headers and Flowmasters.

  flimflam1954

  Year: 1998 Submodel: GT nj

  Helpful (0) Thanks for your input!