September 20, 2016
Very nice quality with easy installation
Once you get your mustang to corner hard, you quickly realize the stock lap belt will not hold you upright in the seat. This quick fit harness is a simple and very effective way to remedy that problem,and very easy to install. Should you need to remove it, it only takes seconds to go back to stock as the factory seatbelts are not removed or altered by this harness. Initially you will need a T50 torx socket to remove and reinstall the factory seat belt anchors and you will need to bend the rear harness attaching bracket by twisting it 45 degrees as per the supplied picture. I used two crescent wrenchs and twisted it by hand to match the picture. It then fit perfectly with no further modifications. Adjusting the belts is relatively easy and the instructions provided are quite good in helping you achieve the correct adjustments. For my application, I tightened the back seat harness and took all the slack out of it. The belts then lay across my chest at the proper height as per the instructions. The quality of the belts is very good and they look very oem in appearance. My only criticism is that I feel the manufacturer should have supplied the rear seat belt anchor bracket pre-bent. Everything else is bolt on and the bracket should be also. For that reason only, I rated the harness 4 stars instead of 5.