Hey, I'm Justin with AmericanMuscle.com, and this is our appearance Bolt-On Build-Up for all 94-98 Mustang GTs. Now as you can see, we really raised the bar in regards to our exterior styling, with our Grabber Blue SN-95 here. We were able to do this using 15 or so different appearance parts that just about anybody can bolt up, in the comforts of their own driveway or garage. Now with the exception of these headlights a majority of the parts used in our appearance pack stayed true to the Mustang bloodlines. Take for instance, our Cobra R-style hood, Saleen-style spoiler, Bullitt wheels and Bullitt fuel door. Now that's just the tip of the iceberg. What do you say we take a closer look at some of the other parts used in our build, that really separated our GT from being just another Mustang build. For starters, we really went to town with our AmericanMuscle Graphics, and why not, since they're made right here in house? First up, we installed these Matte Black Rocker Stripes, which will give our GT a touch of that heritage style. In addition, to further help tone down the brightness of our Grabber Blue paint, we decided to tint just about every light we could, using some of our AmericanMuscle Graphics tint. This includes our Quarter Marker Lights, our 3rd Brake Light, and also our Tail Lights as well. Now using our AmericanMuscle Graphics tint is full of benefits. For one, it's very easy to install. It's also going to be pretty easy on your wallet, and I think we can all agree it really helps turn up the aggressive styling on our GT. A final piece of that AmericanMuscle Graphic can be found right here, with our Black Rear Lower Balance Panel, which is working nicely with our Black Bumper Insert Letters. Now these insert letters are a subtle addition to the rear bumper, and fill the void perfectly. Now these letters are made from 100% stainless steel, which is going to offer you quality, along with durability, and of course that black finish was a no-brainer on our build. These are a must-have for sure for any SN 95. We have a couple of Raxiom products spread around the car, two of which can be found right here in the tail lights. Now we, much like many other Mustang enthusiasts, love sequential tail lights. So we installed Raxiom's Plug-n-Play sequential tail light kit, along with their turn signal modifier. Now this slows the light pattern down, and really allows the entire package to shine. Moving on to the side of the car it's pretty obvious where I'm going next. Nothing says AmericanMuscle more than a set of staggered bullet wheels, and that's exactly what we have going on here. We were able to shove a massive 18x10 in the rear, along with 18x9s up front, all sporting some new rubber from Sumitomo, which should really help our grip, along with our looks, thanks to that black and polished lip combination. Wrapping things up on the front of the car, you'll see a very popular mod with this Mach1 style chin spoiler. Now this spoiler really finishes off the front of the car, and gives the illusion that the car itself is actually a little lower to the ground. Finally, we have one more product from Raxiom, I'm referring to their Smoke Projector Halo headlights. Now these are probably the most radical part we've included in our build in regards to modern styling. Now they feature the very cool Halo accent lighting, which is certainly unique to say the least. So what did we accomplish with our build? Well, we blacked just about everything out, we added parts with some classic Mustang DNA, and threw in some modern styling, just to mix it all up. The end result, in my opinion is understated and over the top at the same time, and what I mean by that is, look at any one area of the car, take the rear end for instance. We have the spoiler, the tail lights, the fuel door. All these parts have been modified, but they don't scream parts catalog. That's because they all work so well together that, to the untrained eye, could be mistaken as factory additions. So that wraps up our build with the 98 GT here. Be sure to check out some of our other 94-98 Bolt-On Build-Ups, where we get our handling in check, and crank up the power.
Stealthy Styling. Now you can add custom looks to your SN95 Mustang with Smoked Third Brake Light Tint from AmericanMuscle Graphics. Smoked Tint will give your Pony stealthy styling that looks great on the street or the strip.
Perfect Fit Guaranteed. AmericanMuscle Graphics pre-cut vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure an easy installation and a perfect professional fit every time.
Pre-cut Vinyl Tint. This Third Brake Light decal is precision cut from durable dark smoked vinyl for a perfect fit and impressive good looks.
Superior Quality Materials. AmericanMuscle Graphics uses only the highest grade of cast vinyl tint available on today's market. This 12 Mil thick lens tint is designed for lens tints. Compared to other products that were designed for window sign displays that are generally around 3 mil in thickness. They also are not forgiving to install on the lights compound curve. The material type and the 12 mil thickness provides superior impact protection. The film is also breathable and self-healing polyvinyl film. Our vinyl is rated for continual outdoor use without shrinking or degradation.
Impact Protection. AmericanMuscle Graphics 12 mil thick poly vinyl tint is breathable and features self-healing properties to provide superior impact protection against stones, gravel and small road debris. A must for a daily driven vehicle.
Easier To Install. AmericanMuscle Graphics vinyl designs are not only pre-cut for a simpler installation, but our 12 mil smoked cast poly vinyl tint is extremely pliable allowing it to easily conform to complex compound curves without curling back and the clear permanent solvent polyacrylic adhesive backing will ensure that it stays securely in place.
Application. This high quality AmericanMuscle Graphics Smoked Third Brake Light Tint is specifically designed to fit on the 1994-1998 V6 and GT Mustangs and the 1996-1998 SVT Cobra Mustangs.
Please Note. The Third Brake Light Tint is not compatible with the Third Brake Light on the rear spoiler for the 1994-1995 SVT Cobra.
repeat visits and preferences, as well as to measure and analyze traffic. To learn more about cookies,