Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter daily!
Win $3,000 in Roush Blackout Mods! Enter Daily!

How to Install an SR Performance Black Cold Air Intake on Your 1994-1995 Mustang GT

Installation Time

1 hours

Tools Required
  • 10mm Socket
  • 10mm wrench
  • Flathead screwdriver
American Muscle
Shop Parts in this Guide

Step 1. Remove your factory intake, MAF sensor and IAT sensor from your vehicle. The IAT sensor and MAF sensor housing will need to be reused in the new intake assembly.


Step 2. Install the MAF sensor onto the lower portion of the intake tube then install the heat shield and filter onto the tube.


Step 3. Place the lower portion of the intake into the fender well and secure it to the vehicle using the factory mounting points.


Step 4. Screw the factory IAT sensor into the new upper intake tube


Step 5. Install the upper portion of the intake onto the vehicle, ensuring all connections are plugged in and tight before driving the vehicle.