Customer Reviews (79) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Less than 1 Hour

• Performance Gain 4.013514 4.0
• Fit 4.162162 4.2

• 5/5

  Installation Time: Less than 1 Hour

  October 02, 2018

  cold air intake

  Can feel car breath better, stronger, HP improvement

  Timothy

  Year: 1994 Submodel: GT

  Helpful (0) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 5

    5
• 3/5

  Installation Time: Afternoon

  August 29, 2018

  Poor fit, requires modding.

  This intake came very close to being sent back. The heat shield was a terrible fit. The problem is a large wiring harness that can't be moved much and also when the heat shield is mounted (as it comes) the filter hole is partially plugged by the inner fender. See pictures. Since it was reasonably priced to start with I proceeded to drill and cut. The aluminum studs I cut approx 1/8" off of each one (the thread end) and drilled new holes in the plate for them approx. 1/2" ahead of the original holes. Once installed it looks great. I turfed the filter and installed a KandN RC5040 for more flow. More of a cool sound and appearance gained than performance.

  DaveY

  Year: 1994 Submodel: GT

  Helpful (0) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 3

    3
• 5/5

  Installation Time: Less than 1 Hour

  July 30, 2018

  Great product for the $

  Happy with this intake, install was fairly simple but I’m a mechanic by profession, took about 30 minutes and some parts weren’t the easiest to put together but all and all it fits well and function is great

  MichaelW

  Year: 1995 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  July 23, 2018

  Sn95 cai

  Love the look of the black piping fit was very good .

  JoshS

  Year: 1995 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  July 18, 2018

  Great product

  Immediately noticed a change in throttle response. Highly recommended. Easy install

  JamesH

  Year: 1995 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  July 03, 2018

  Sharp looking !!!

  Nice tight fit. Good looking product. Hopefully built to last. Only time will tell. Overall nice product.

  Michael

  Year: 1995 Submodel: Cobra

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  May 28, 2018

  easy

  easy to install,had to make a slight modification to the mounting plate other than that fits great

  WesJ

  Year: 1994 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  April 28, 2018

  Nice

  Fit and finish nice. Had to spend a little extra getting bumps popped into grommets for fender inlet.

  FrederickB

  Year: 1994 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  April 22, 2018

  Love it

  Great got to my house on time and I’m happy with the product

  Antoine

  Year: 1995 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 5

    5
• 3/5

  Installation Time: Less than 1 Hour

  April 19, 2018

  Dr cold air intake

  It was a tight fit. But it look good when I was finish.

  Kenneth

  Year: 1995 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  April 18, 2018

  Recommend

  Great sound and really helps keeping the engine cool and really does give it a slight extra torque feel

  GeovanniN

  Year: 1995 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 3

    3
• 5/5

  Installation Time: Less than 1 Hour

  April 16, 2018

  Easy to install

  It is very cool i noticed a difference in my mustang gt very nice it was easy to install and im very satisfied

  JorgeM

  Year: 1994 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 3/5

  Installation Time: Less than 1 Hour

  April 09, 2018

  Not happy with the fit

  Ok, so I've had this CAI for a while, finally had time to install. I don't know what's different between the other reviews I read and my car but I could not use the grommets on the bottom of the bracket that holds the air cleaner inside the fender well. Just couldn't get all to line up. I also had to trim one of the couplers as the entire unit was too long. Still waiting for other parts to arrive so its not running yet. Looking forward to the test drive.

  95GT

  Year: 1995 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 3

    3
• 5/5

  Installation Time: Less than 1 Hour

  March 28, 2018

  Fits tight!

  Fits really tight, the fitment is more to spec than OE Haha! Works great, throttle response is better, not sure about average horsepower gains but I already am liking it. Just installed it this morning. (03/28/18)

  KevinH

  Year: 1994 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  March 09, 2018

  Looks good

  Overall fit was OK, had to work pretty hard to get the couplings to slide over the TB and MAS, other than that, pretty happy with it.

  RobR

  Year: 1994 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  March 09, 2018

  Perfect fit

  Very tight fit, fits exactly, good quality couplers. All oem sensors fit exactly as they should.

  PatrickJ

  Year: 1994 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  March 07, 2018

  Surprisingly big difference

  Love it, the finish is great and install was easy with clearly printed directions. The only difficult part ,if you can call it, that was slipping the couplers on the mass air and the throttle body, they are a tight fit. Installed it and went for a drive and to my surprise it actually made a significant difference. Great product and love the price.

  JarrettM

  Year: 1994 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  March 02, 2018

  Required when using a larger MAF Sensor

  I upgraded to a 75mm MAF sensor calibrated to my 24lb injectors I put on my 1995 GT. The larger MAF sensor does not fit in the factory housing so an aftermarket kit like this is an easy solution. This kit is complete, inexpensive and easy to install. The fit is 4/5 as it is as SUPER tight squeeze to position both rubber couplings but only because I have the larger MAF sensor. After 5 minutes of fiddling it was on. Using the stock MAF sensor would make it fit perfect. Performance gain is unnoticeable. A CAI does not increase horsepower but anybody who understands how engines make power knows this, and my car is so loud I can't tell if the intake is louder now because of it. I recommend this product based on it's low price and functionality.

  AJBouck

  Year: 1995 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  March 02, 2018

  cold air intake

  easy enough where I didn't even need the instructions

  MarcosD

  Year: 1995 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 2/5

  January 31, 2018

  Didn’t fit.

  The rubber connectors didn’t fit of the MAF or throttle body.

  DerekA

  Year: 1994 Submodel: GT

  Helpful (2) Thanks for your input!

  • Performance Gain 2

    2

  • Fit 1

    1