Win $5,000 For Your Mustang! Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

SR Performance Double Hook Quadrant (82-04 All)

Market Price $42.99 You Save 19% ($8.00)
Our Price

$34.99

FREE Shipping on orders over $49
  • Item 388983
  • MPN# 388983

In Stock Ships same business day. Choose options to add to cart

Features, Videos & Details

  • Double Hook Design
  • Heavy Duty
  • Strong Billet Aluminum Construction
  • Fits 1982 to 2004 Manual Mustangs

Review & Installation Video

What’s up everyone, Justin from AmericanMuscle.com, here with a cure to that mushy clutch pedal, and that sticky clutch cable on your ride. I’m talking about this adjustable clutch kit for all 96-04 Mustangs. Simply put, this kit is going to make your car shift like new again by replacing and reinforcing some of the crucial components responsible for getting your car into gear properly and smoothly. The first and most obvious part of this kit is the brand new fully adjustable clutch cable which replaces your old gummed up factory cable. Now over time your clutch cable picks up all kinds of dirt and grime, making for inconsistent pedal feel. As you can see this new cable slides easily, and without any effort whatsoever, and when paired with other kit components, makes for a smooth pedal feel and full adjustability. The adjustability I’m talking about is made possible thanks to this firewall adjuster. This part makes life a whole lot easier when it comes to adjusting your clutch, thanks to the fact that you don’t have to crawl under your car anymore to do so. The new clutch cable will run through this piece mounted on your firewall and simply by turning this knob you can adjust the length of your clutch cable. Now this will also give you much more precise control over your clutch pedal engagement point to better suit your style of driving. The star of this kit without a doubt is the Billet aluminum double hook clutch quadrant. Your clutch cable runs through this little piece bearing the brunt of all those hard shifts. Now your stock quadrant is made from cheap plastic which can flex or even break causing mis-shifts especially when using heavier duty clutches and pressure plates. This Billet aluminum piece totally eliminates the cheap plastic, and is designed to hold up to even the hardest shifts. Installing this kit requires you to remove your factory clutch quadrant and cable, although it’s nothing more complicated than removing a few bolts and snaking some cables, you do have to crawl underneath your car making it somewhat of a time consuming install that should take you a couple of hours. Now we here at AmericanMuscle always recommend installing this kit especially when using aftermarket clutches. It’s a simple peace of mind that will make your life a whole lot easier, trust me. If you’re experiencing a mushy clutch pedal, mis-shifts or an overall poor shifting experience, then this clutch adjuster kit for your 96-04 Mustang will have your car shifting like new all over again.

Heavy Duty, Flex Free. The stock self-adjusting clutch quadrant is made from plastic, which is prone to bend (and break). This unwanted quadrant flex can cause inconsistent clutch engagement and missed shifts. But the SR Performance Double Hook Quadrant is made from solid billet aluminum so it won't flex even under the hardest shifts.

Double Hook Design. This unique SR Performance Double Hook Quadrant design allows you to adjust your clutch pedal feel with either a firewall mounted adjuster or an adjustable clutch cable. This feature is unlike other quadrants on the market today that only have one type of adjustment mechanism.

Application. This SR Performance Double Hook Quadrant is designed to fit the 1982 to 2004 V6 and V8 Mustangs with a manual transmission.

Technical Note: A Firewall Adjuster and/or an Adjustable Clutch Cable is required with use of this product.

Fitment: 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Details

What's in the Box
  • (1) Billet Quadrant
  • (1) Aluminum Spacer
  • (1) Plastic Washer
Installation Info
Tech Specs
Will it fit my Mustang?
  • Foxbody - 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93
  • Cobra - 93, 94, 95, 96, 97, 98, 99, 01, 03, 04
  • GT - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04
  • V6 - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04
  • Bullitt - 01
  • Mach 1 - 03, 04

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Great Product

I installed this item to replace the factory clutch adjuster which kept on breaking on me because they were plastic. This product keeps my clutch feel great and dont have to worry about it coming out of ...

Read More
Helpful (4)

5/5
great

This doublehook quandrant is a 100% improvement over the plastic that was original in the car.

Helpful (3)

Overall Rating 4.9 out of 5 stars
Read All 40 Reviews

Customer Photos (3) Submit Your Photo

View All 3 Photos

You Might Also Like

1 Questions / 1 Answers

Ask a Question

I have Your double quadrant and adjustable cable I on the second hook the cable is tight at the adjuster, like no play at the firewall and my clutch slips in 3rd 4th 5th

guyk

  • The SR Performance Double Hook Quadrant should be nice and tight, and it sounds like the adjuster is working well, however, your clutch disk may be worn if it is slipping under load.

    AMJEFF

Helpful (0)

More Products You Might Like

Customer Reviews (40) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Afternoon

Installation Cost:0-$100

  • Fit 4.931035 4.9
  • Bang For Your Buck 4.724138 4.7
  • Grip / Bite 4.965517 5.0



  • 5/5

    December 10, 2009

    Great Product

    I installed this item to replace the factory clutch adjuster which kept on breaking on me because they were plastic. This product keeps my clutch feel great and dont have to worry about it coming out of its adjustment.

    Jesse

    Helpful (4)

  • 5/5

    June 06, 2010

    great

    This doublehook quandrant is a 100% improvement over the plastic that was original in the car.

    tim

    Helpful (3)

  • 5/5

    March 29, 2011

    Great product

    Worked as advertised. Made installing the new clutch cable a breeze.

    Frank

    Year: 2001 Submodel: Cobra

    Helpful (2)

  • 5/5

    April 15, 2010

    Smooth

    Easy install,I used the firewall adjuster also.Makes a fast and smooth shift.Too bad it is hidden under the dash the billet aluminum is great looking,wish I would have replaced sooner.

    Billy

    Helpful (2)

  • 5/5

    October 14, 2008

    Clutch Quadrant

    Combine the quadrant with the Steeda firewall adjuster and pedal stop and the 5 speed cars become a blast to drive. My mechanic said they were the easiest to install and the best quality he has seen yet. My hand isnt as fast as my foot anymore!

    Dave Dudka

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    January 31, 2017

    Good part, patience on install

    Great replacement for plastic. Much easier to spend money now for firewall adjuster. Need patience for install. Recommend taking driver seat out so don't go insane lane on your back working under dash. Took me 40 minutes

    dre256

    Year: 2003 Submodel: GT

    Helpful (1)

  • 5/5

    October 10, 2016

    Sr quadrant

    Works great easty to install. Along with the sr cable and firewall adjuster.factory quadrant is a piece of junk! Bought my 2001 new weekend driver of all the things l have done to the car can't believe l did not do this a lot sooner. Thank AM for super service.

    My01

    Year: 2001 Submodel: GT

    Helpful (1)

  • 5/5

    August 30, 2016

    Smoooth

    My clutch feels brand new, nice and firm(not stiff), I will say that the cable goes on the second hook farthest away from the firewall, not the closest.

    Andrew1972

    Year: 2000 Submodel: GT

    Helpful (1)

  • 5/5

    July 12, 2016

    Looks nice

    It fit great love it will tell all my friends about american muscle

    Morris

    Year: 2001 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 20, 2016

    Smooth clutch pedal

    Very nice and stiff but smooth really easy to install and gave it the feel it needs

    Torres

    Year: 1989 Submodel: GT

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    February 29, 2016

    Double Hook Quadrant

    Had some trouble fitting it into my 89mustang, so I ended up boring out one hole a little bit. After that it just fell into place... Even though that pedal go to the floor, it works very well. I do suggest getting the fire wall adjusted, something that I will be getting soon. Shipping could be cheaper.

    SVOrider

    Year: 1989 Submodel: Other

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    January 20, 2015

    Good product

    This item was just what i needed. Only issue I had was there were no instructions with it, that would have helped.

    Ramrod6531

    Year: 1997 Submodel: GT Oceanside, CA, USA

    Helpful (1)

  • 5/5

    January 12, 2015

    solid looking piece

    haven't had the chance to install it yet but it looks way stronger than the plastic stock unit. will be installing it around the summer once i modify some other stuff

    vbondjr1

    Year: 2002 Submodel: GT PA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    July 25, 2014

    New clutch?

    If you're getting a new clutch id say its a must that you get a quadrant, cable and firewall adjuster. Simple install and a huge difference!

    KellyS

    Year: 2003 Submodel: Cobra NJ

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    May 28, 2014

    Great product!

    Overall this is a nice product. the quality and fitment are great!

    bluestang1724

    Year: 2003 Submodel: Cobra Savannah, GA, USA

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    June 27, 2013

    Easy install and really bites

    I was shocked when I learned the factory quadrant was plastic. I never had a problem with it. But once I learned that I decided to replace it before I ever had problems. It took me only 7 Min 38 seconds to remove my old quadrant and install the new one and this was my first time ever messing with a quadrant before. Im only 19 years old with little car knowledge but was able to complete this install quickly, and have everything adjusted properly. I would highly recommend this to anyone with a 82-04 Mustang. I love this quadrant and it makes me feel more reliable and safe.

    Deathjunkie

    Year: 1998 Submodel: Cobra Winter Haven, FL, USA

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    January 27, 2012

    Must do upgrade with aftermarket clutches

    This upgrade was a long term need with the RAM HDX clutch I had installed over a year ago. I frequently needed to "re-adjust" the clutch by lifting on the pedal and I could alsmost feel the clutch pedal straining under the pressure. Install was fairly straight forward even though the AM installation instructions were not specifically designed for this part. Clutch pedal pressure is now consistant and no longer requires adjustment. Shifts are much smoother.

    ThatVieiraKid

    Year: 2002 Submodel: GT Bethlehem, PA

    Helpful (1)

  • 5/5

    June 02, 2009

    steeda quadrant

    after getting the stock quadrant off, this one easy to adjust. made my clutch seem more smooth. i love it and wish I changed it along time ago.

    oojamison

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    September 27, 2017

    Great for the $$

    If your a big guy good luck with the instal works great with an adjustable clutch cable

    Jose

    Year: 1996 Submodel: GT

    Helpful (0)

  • 5/5

    Installation Time: Afternoon

    September 26, 2017

    It works!

    Worked like it should, it was easier to install than it was to remove factory quadrant. Great product

    LeviR

    Year: 2000 Submodel: GT

    Helpful (0)

Related Mustang Categories