Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install SR Performance Muffler Delete Axle-Back Exhaust - Polished SS on your Mustang

Installation Time

1 hours

Tools Required
  • Jack Jack Stands (4) Sawzall or similar Ratchet Sockets (13mm, 15mm) Wrench (13mm, 15mm)
American Muscle
Shop Parts in this Guide

Step 1: Raise and support the car so that you can access the mufflers. You will need to cut the mufflers at the sway bar bracket. Imagine a straight line from the outside of the sway bar bracket to the ground, cut along that line. Then remove the muffler bracket by removing the (2) 13mm bolts. 


Step 2: Assemble the muffler delete using the factory muffler bracket and the supplied exhaust clamp.


Step 3: Install the muffler delete, slide the delete on to the exhaust. Do not tighten the clamp yet. See Step 5. 


Step 4: Mount the muffler bracket to the chassis using the factory hardware. 


Step 5: Center the tip in the bumper by sliding the muffler delete back and forth on the exhaust. **Note: Additional trimming of the exhaust pipe may be necessary Tighten the exhaust clamp once the tip is where you want it. 

Best Sellers