Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Steeda Heavy Duty Rear Sway Bar (05-10 GT, V6)

Item 16217
AmericanMuscle no longer carries the Steeda Heavy Duty Rear Sway Bar (05-10 GT, V6). Please check out 2005-2009 Mustang Sway Bars & Anti-Roll Kits for an updated selection.

Features & Details

  • Improves Driving Performance
  • Heavy Duty 7/8" Diameter
  • Silver Powdercoat Finish
  • Fits 2005 to 2010 Mustangs
  • Made in the USA
Performance Handling. Installing Steeda's rear swaybar will greatly improve steering response, reduce understeer and improve overall handling balance. This Heavy Duty sway bar provides approximately 50% increase in rear roll stiffness over stock.

Quality Materials. The Steeda Rear Sway Bar is made in the USA from 7/8" diameter tubular steel for extra strength and is completed in a silver powdercoated finish for great looks and long life.

Application. Designed for use on the 2005 to 2010 GT and V6 coupes with the factory sway bars. Will not fit on V6 Mustangs that were not equipped with a rear sway bar from the factory.

Note: Coupon codes cannot be applied to this product.

Technical Note. This Steeda Rear Sway Bar does not include endlinks, it is designed to reuse the stock endlinks.

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
Hardware included:
  • (2) Two Pivot Bushings
  • (2) Two Tubes of Pre-Lube
Installation Info
Tech Specs
Will it fit my Mustang?

    Customer Photos (4) Submit Your Photo

    View All 4 Photos

      Questions & Answers (2)

      2 Top Rated Questions

      Hello, is this a direct fit for a 2008 GT Convertible or coup only ?

      • The Steeda Heavy Duty Rear Sway Bar does not fit convertible or V6 models that did not come with the rear sway bar from factory.

      Helpful (1)

      V6 stock endlinks? Will it work with 2008 V6's stock endlinks or it is necessary to buy a new, expensive ones from Steeda?

      • Get a new one, you won't regret it

      Helpful (0)
      Post Your Question

        Customer Reviews (11) Write a Review

        Overall Rating 4.3

        out of 5 stars

        Installation Time:Afternoon

        Installation Cost:$100-$250

        • Handling Improvement 4.6 4.6
        • Fit 4 4
        • Bang For Your Buck 5 5

        • 5/5

          Installation Time: Shop Install

          Installation Cost: $100-$250

          July 18, 2017

          Sway Bar

          noticed a big difference in how flat my car is in higher speed turns after installing this sway bar i has stiffened the rear end in the corners by a noticable amount, the car no longer feels like it is rolling to the outside of the curves.


          Year: 2007 Submodel: GT

          Helpful (5)

        • 3/5

          Installation Time: Less than 1 Hour

          December 03, 2015

          Can't use stock end links

          If you order this sway bar it is much thicker than stock. You will have to purchase Steeda end links, you can not use stock end links, they are too small. Had to return since AM did not have Steeda end links that would fit this bar. :( Really wanted to use this bar. The price for Steeda end links on Steeda's website cost more than the sway bar. Had to return.


          Year: 2007 Submodel: GT Illinois

          Helpful (5)

        • 5/5

          Installation Time: Afternoon

          April 01, 2013


          Great price, definitely improves the rear handling of my car. Its an easy install i also removed the tires lifted and placed jack stands on each end of differential remove used parts from old sway bar (arms) greased them up good and pushed clockwise and installed new swaybar if reusing make sure you put locktite on them.


          Year: 2006 Submodel: GT Orlando, FL, USA

          Helpful (7)

        • 5/5

          Installation Time: Afternoon

          April 27, 2012

          Steeda Heavy Duty Rear Sway Bar

          A say better sway bar than the V6 pony package one I had. I,m happier than a clown at a carnaval. Just like every one has said. If installing on a 6er order the new endlinks.


          Year: 2009 Submodel: V6

          Helpful (7)

        • 5/5

          Installation Time: Afternoon

          January 16, 2012

          Great product!

          Really stiffens the rear end. The installation instructions don't say to remove the rear wheels but it made the install SO much easier especially since I was on my own. I recommend both the Sway Bar and the removal of the rear wheels when installing it.


          Year: 2005 Submodel: GT Florida

          Helpful (7)

        • 5/5

          December 05, 2010

          steeda rear swaybar package

          nice product, easy install,but i think it should come with an endlink product as well.


          Helpful (10)

        • 4/5

          October 14, 2010

          Don't lean on me.

          I lowered the rear of my 2006 mustang GT to level its stance.I installed the Steeda rear bar to balance its handling more to my driving style. It fit well and it works well. If there is a negative it would be the quality of the paint on the bar.

          Lee Chase

          Year: 2006 Submodel: GT

          Helpful (7)

        • 5/5

          October 14, 2010

          Steeda sway bar review

          The part came in in very fast thanks to AM. Comparing it to the stock piece you can tell its WAY more solid and the quality is superb. Installation was a snap and it makes the car MUCH more stable, you can tell when you take to the twisties.


          Helpful (11)

        • 4/5

          August 22, 2010

          worth it

          Lets put it this way, im 16 and i did the install by myself in my garage without my car lifted in about an hour and a half. (so its an easy install) You can notice a slightly tighter rear and less roll.

          Maxx H

          Helpful (9)

        • 4/5

          July 26, 2010

          average joe

          I notice an immediate difference in stiffness and and handling. I'm not a mechanic, but i'm not helpless either....I found this to be a moderately challenging installation. I would give the nod to anyone that is on the fence on this one.

          Erik Tomko

          Helpful (7)

        • 2/5

          May 16, 2010

          Be careful when ordering for V6

          You need to order new endlink if putting this sway bar on a V6...My endlink came missing 6 necessary fasteners.....


          Helpful (13)

        Related Mustang Categories