Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!

Steeda Strut Tower Brace (05-10 GT)

AmericanMuscle no longer carries the Steeda Strut Tower Brace (05-10 GT). Please check out 2005-2009 Mustang Strut & Shock Tower Braces for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Improves Handling.
  • Eliminates Suspension Flex.
  • Chromoly Steel.
  • Black Powdercoat Finish.
  • Fits 2005 - 2010 Mustang GT.
Improve Handling. Put an end to strut tower movement and tighten up your handling with a Steeda Strut Tower Brace. With a Steeda strut tower brace, your Mustang will corner like it's on rails and off ramps will become an excuse to romp on the gas instead of a reason to slow down.

Steeda Style. This sporty bar also adds some Steeda style to your engine bay with a Steeda polished billet plate in the center of the brace.

Built to Perform. This race-tested tubular design is made from 4130 chromoly steel for unsurpassed durability and strength. The Steeda strut tower brace is finished with a textured black powdercoat.

Simple Installation. Installation takes less than 30 minutes and requires no modifications.

Note: Coupon codes cannot be applied to this product.

Technical Notes. Will not fit V6.

Fitment: 2005 2006 2007 2008 2009 2010 Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Strut tower brace
  • (1) Steeda name plate with hardware
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (30) Submit Your Photo

View All 30 Photos

More Products You Might Like

Questions & Answers (8)

5 Top Rated Questions

Works with Ford Racing Manifold? Simple and expected question: I have a Ford Racing Intake Manifold in my 06 GT (http://www.americanmuscle.com/ford-racing-intake-manifold.html). Is this bar gonna fit? Is there enough space between the hood and the manifold?

  • The brace is not designed to fit with the Ford Performance intake manifold. Many enthusiasts have installed the brace with the manifold, however this may require modification for the installation or lowering motor mounts.

Helpful (3)

Stock hood? I have a stock hood on my 05 mustang and I'm really worried this wouldn't fit under the hood. Has anyone else installed theirs and kept the hood stock? I've never seen one in person so i dont know how tall they are after the install.

  • Yes this does fit under a stock hood. It fits extremely close to the intake cover. My friend has the exact brace on a stock 07, fits perfectly.

Helpful (1) Show 2 more answers

Does this clear the roush m90 supercharger? If not what will? Thank you

  • The Steeda Strut Tower Brace will not clear the Roush M90 Supercharger and we do not currently offer a strut tower brace that is guaranteed to clear.

Helpful (0)

I have an 06 GT with a Edelbrock Stage 1 supercharger and I'm looking for a strut tower brace that will fit over the sc and under my stock hood. Will this one fit? If not, could you recommend one that will?

  • At this time we do not offer any strut tower braces that will safely clear the Edelbrock Supercharger.

Helpful (0)

I see this connects to only 2 strut mounts on each side as opposed to all 4 strut mounts on other models. Would this sacrifice more performance than the others because of this?

  • The Steeda Strut Tower Brace will not sacrifice any meaningful strength based on the mounting locations.

Helpful (0)
Post Your Question
3 More Questions
Some of the customer pictures show the Steeda plate on top as a black or other color. Is there any way to order this with the plate as a different color instead of chrome? 1 answer
Works with Whipple? I've got 08 GT with Whipple 2.3L SC, will this fit over it? I love the look of this vs the other one Steeda came out with specficially for the whipple. 1 answer
Will this clear the BOSS intake? 3 answers

People Who Bought This Item Also Bought

Customer Reviews (43) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Less than 1 Hour

  • Handling Improvement 4.296296 4.3
  • Fit 4.62963 4.6
  • Bang For Your Buck 4.407407 4.4



  • 5/5

    Installation Time: Less than 1 Hour

    October 09, 2018

    Easy install.

    Easy install. Super control. Smooth ride Great Apperance under the hood.

    STPGAPRO

    Year: 2008 Submodel: GT

    Helpful (1)

  • 5/5

    September 06, 2018

    Steeda strut tower brace

    I had the shop do the installation, performs well, and looks good.

    CliftonS

    Year: 2008 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    August 31, 2018

    Strut Tower Brace

    Part installed easy. Directions in reference to removing grommets on intake were a little confusing. Definitely improved handling.

    DavidC

    Year: 2009 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    August 06, 2018

    Steeds Strut Brace

    Easy install. Took thirty minutes because I am meticulous about the fit and not scratching any hardware. The brace looks awesome and clears the engine plenum with room to spare. Haven’t tested the road handling upgrade yet but the brace is built solid. Very pleased.

    RedPony

    Year: 2007 Submodel: GT

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    June 03, 2018

    Strut tower brace

    Looks great. Super easy install but was disappointed the strut tower bolt caps didn't fit after brace we installed.

    NelsonP

    Year: 2005 Submodel: GT

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    April 24, 2018

    quality and performance

    out of box it is quality all over, nice paint and well protected for shipping, the center STEEDA badge is real nice billet aluminum held in place with screws and nylock nuts. fit is perfect, drops on strut studs, instruction included but would be slightly better if they included torque spec for nut, easy to look up so minor issue. also would love option to get center badge anodized a color to match car, will do that on my own. chrome moly is stiffer than typical steel and this really helped my convertible bump steer on rough roads.

    Raymo

    Year: 2007 Submodel: GT

    Helpful (5)

  • 4/5

    Installation Time: Less than 1 Hour

    August 18, 2017

    Steeda Strut Tower Brace

    Easy to install take your time. If you have any type of engine cover it is a very tight fit. the handling change is immediately noticeable.

    RickP

    Year: 2007 Submodel: GT

    Helpful (7)

  • 5/5

    Installation Time: Less than 1 Hour

    June 07, 2017

    Well built

    well constructed metal, the welds look hand crafted, and mounting took no time at all, the packaging was phenomenal they could have dropped it over and over and it would of been 100 percent still

    NateE

    Year: 2005 Submodel: GT

    Helpful (8)

  • 5/5

    Installation Time: Less than 1 Hour

    May 26, 2017

    Great looking brace

    This Strut brace loos and feels great, solid build and very easy to install.

    ScottR

    Year: 2005 Submodel: GT

    Helpful (4)

  • 1/5

    Installation Time: Less than 1 Hour

    May 07, 2017

    Will not work with Ford Racing Manifold

    Even though American Muscle QandA says yes I tried spacers and even bending with no luck, plus mine came chipped and scratched. Plus the emblem was scratched too… (Poor Quality)

    Anthony

    Year: 2007 Submodel: GT

    Helpful (4)

  • 1/5

    Installation Time: Less than 1 Hour

    April 24, 2017

    Steeda Strut Tower Brace

    Unfortunately I had to return this item....Based off of reviews and question and answers this was supposed to fit. my car. FYI>>>it will not fit over the Ford High Performance Racing Intake....you will need the Boss 302 strut brace.

    EmmettE

    Year: 2009 Submodel: GT

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    March 25, 2017

    Awesome!

    Even with my swaybar upgrades could definitely feel the front-end tighten up.

    Jason

    Year: 2007 Submodel: GT

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    January 04, 2017

    Great

    Great strut bar, can't say I feel a noticeable difference in handling but it look amazing under the hood. Super fast shipping which is always great and the reason I shop with AM.

    Keith

    Year: 2007 Submodel: GT

    Helpful (8)

  • 5/5

    Installation Time: Less than 1 Hour

    February 01, 2016

    Craig S. Trujillo

    I replaced the tower brace on my 2013 V6 convertible with the Steeda Strut Tower Brace. Looks 10 time better than the stock brace the is standard on the Boss. Fit perfect and the black compliments the factory look.

    Terraquad

    Year: 2013 Submodel: V6 Simsbury, CT

    Helpful (7)

  • 5/5

    Installation Time: Less than 1 Hour

    January 01, 2016

    Amazing product!

    The Steeda strut tower brace is amazing! It really help to tighten up the body roll in he front end of my 2007 GT! The installation was a breeze my 7 year old did the work under my close supervision! It took us about 30 min to complete installation. The finish looks great with the rest of the engine bay. Overall an amazing product!

    Airbornejudd

    Year: 2007 Submodel: GT Nashville, TN

    Helpful (8)

  • 5/5

    Installation Time: Less than 1 Hour

    August 10, 2015

    Bolt-on Stiffness

    Ordered and installed this tower brace on my 08 Mustang GT. Did not have any braces yet, just coilovers and sway bars. Took about 10 minutes to install and torque correctly. Noticed much greater front end stiffness and a reduction in deflection in off camber curves. Did not expect to feel this much of an improvement so definitely appreciated what this did to tie the front end together. Not sure why I did not get this earlier.

    KingSpartacus

    Year: 2008 Submodel: GT Tampa, FL

    Helpful (7)

  • 5/5

    Installation Time: Less than 1 Hour

    May 17, 2015

    What a Difference It Makes

    Installed the Steeda brace in about 10 minutes. I have an 08 GT with the plenum cover on the engine. It clears the plenum and doesn't hit the stock hood. Amazing difference for my convertible. Makes the front end tighter and more of a solid feel versus a vibration I would get at certain speeds. Quality is very nice, appears power coated versus spray paint. Has a mild texture on the metal, Took two pictures, one showing installed and another so you can see it clearing the plenum cover.

    Mogab

    Year: 2008 Submodel: GT Land O Lakes, FL

    Helpful (8)

  • 5/5

    Installation Time: Less than 1 Hour

    October 10, 2014

    Great Item

    Nice Upgrade, almost cleared my engine cover 05 GT.

    Black05GT

    Year: 2005 Submodel: GT Norway

    Helpful (10)

  • 5/5

    Installation Time: Less than 1 Hour

    June 06, 2014

    Steeda Strut Tower Brace

    This was the easiest and quickest mod install I have done...10 minutes start to finish. I'd highly recommend this item to anyone.

    CaseyH

    Year: 2010 Submodel: GT Norman, OK, USA

    Helpful (7)

  • 5/5

    Installation Time: Less than 1 Hour

    March 25, 2014

    Strut brace

    Excellent product and great addition to the underhood appearance. it also tightens up the suspension to decrease body roll in corners. It arrived very well packaged without a scratch on it. No complaints whatsoever.

    todrick

    Year: 2007 Submodel: GT Augusta, GA

    Helpful (8)

Related Mustang Categories