(approx) 5 Minutes
Simple installation for anyone.
$47.71 (each)FREE Shipping on orders over $49
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2005 2006 2007 2008 2009 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 07, 2019
My car came with these, had taken off to try out another emblem, seen other cars with these emblems on decided to buy and will put on soon. to bad these are not real chrome pieces. price is high for some plastic emblems but they look good.Helpful (0)
December 22, 2018
Look good easy to put on. You do have to keep pressure on them for awhile to ensure they adhereHelpful (1)
June 15, 2018
This is NOT metal. It is plastic or something just as cheesy. I am trying to return it but having trouble with that as well.Helpful (3)
January 11, 2018
New fender badge
I like the new badge I received for my car. Still waiting on the second one but they will be a nice addition to the car. Price is a bit steep for a piece of plastic though. But that's what you get when its a lisenced product.Helpful (3)
October 02, 2017
Great looking emblem!
I wasn't sure about the price but after getting them, I'm glad I did! Nice quality product with great color and easy to install. I highly recommend them!Helpful (3)
July 30, 2017
Thought they were metal, but its just plastic.
These can bend very easily, so be careful with them. They also have two prongs on the back that were left on from the mold, so youll have to take a pair of pliers and break them off, unless you want to drill 2 holes into your fender.Helpful (3)
June 24, 2017
What can you say, it's a Ford part. It's perfect. I like the retro look of these better than the GT badges.Helpful (3)
April 24, 2017
These are awesome! They are a really nice size, and great quality. I was slightly skeptical about the price, $40 for each emblem is quite steep, but it's totally worth it. They are even slightly curved to fit the body of the Mustang. They DO have the pins on the back, but I removed them with pliers and sanded it down just a bit. Also, through some research, the factory placement is 3.5" from the top of the emblem to the crease of the car, and 3.5" from the top of the tail to the front of the door. Hope that helps!Helpful (6)
April 18, 2017
Very nice quality
Look great ... I cut the studs off with a drummel wheel and just used 2 side sticky tape to installHelpful (3)
April 12, 2017
Nice Looking, Classic Emblem!
A really nice looking, classic Tri-Bar Mustang pony emblem. The two rear tabs remove very easily with a Dremel Tool or similar device, for mounting to flat surfaces without drilling. The 3M tape backing sticks firmly, even to an interior headliner. The emblem itself has a very slight, inward bend along the tri-bar to match the original fender curve of the 05-09 V6, where it was designed to attach and fit... I attached it to my interior headliner on my 2008 GT500KR (see photo). Yeah, I know, some will call that overkill. But it's still a pony at heart, and I wanted a Mustang emblem someplace to reflect that heritage.Helpful (4)
Is this a plastic of metal emblem and does it have locater pins on the back? My 05 does not have fender emblems. Can I cut off the pins (if it has them) and stick this on the fender with 3m adhesive? Does the emblem have adhesive already? Is it metal or plastic? thanks.
This fender emblem is plastic with a bright chrome finish. It does have pegs on the back used for installing as well as the adhesive. However, many customers have cut off the pegs and sanded them down to install with the adhesive only and have had great results!
Where do I put this on my fender like, I have a 2011 Ford Mustang, What height (Inches) would I go up and how far to the right or left would I put it on there?
The Ford Tri-Bar Pony Fender Emblem does have pins and adhesive for installation. The pins can be removed from the back of the emblem and the emblem can be installed wherever you would like.
Dimensions What Are the dimensions of this product?
Don't you wish American Muscle realized that Emblem sizes are important to buyers? It is 4 1/4 inches tall by 4 inches wide (tail to nose of the pony). Hope this helps. PS It is a great product and holds up very well to the elements. Sky President
Will these Emblems replace the "GT" Emblems on the V-8's
yes they can if you already have gt emblems off of car this should go in the same holes
Can it be reapplied if taken off?
Yes. You must first be very careful removing them, so as to not ruin your paint,or crack the emblem. Then use "emblem glue" (or 3M Tape) to reapply them. Hope this helps. Sky President Nice product too...holds up real well in the weather.
The Emblems have 3 pegs on the back, and I do not know if they will fit in the factory holes of a 2000 Mustang (as the part lists fitting 05-09); however, many people just file, or cut the pegs off and use the 3M tape provided to stick the emblem where they want it to be. I added these to my 2005 Mustang (which did not have any emblems) and they look as good today as when I installed them 6 months ago: very durable, shiney, and an attractive accent to my Mustang's fenders. If you also cut off, or file off the back pegs, the emblems should stick on your 2000 Mustang as they stick on my Mustang. It is a choice you will have to make. Also, be certain there is no major "size" difference...I do not know how big the Tri-Bar emblems are on a 2000 Mustang. I hope that my response answered your question...if so...please click "helpful" below. Thanks!
(approx) 5 Minutes
Simple installation for anyone.
What's in the Box