- (1) Right Signal Housing
- (1) Left Signal Housing
- Hardware included:
- None Required
Free Shipping On Orders Over $49. Details
$24.95 (pair)
FREE Shipping on orders over $49Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Current Item:
Axial Smoked Side Marker Lights (10-14 GT, V6)
Total Price with All Options:
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Hi, I'm Justin with AmericanMuscle.com, and I'm checking out a set of these smoked side-marker lights fitting all 2010 and newer Mustangs. On the road, these side markers make a noticeable improvement to the front of your ride versus your amber factory side markers, and if you're one of the many Mustang owners who chooses the complete blackout look, then these side markers are essential. These lights, sold in a set of two are a direct factory replacement. Now, since they are a direct replacement, the install really isn't all that bad. You will need to remove you inner fender liners, just to gain access to the back of the lights, so removing your front wheels altogether will make life a whole lot easier, trust me. Either way, removing your factory lights and installing these new smoke units should take you about 45 minutes. So if you're looking to achieve that total blackout look in your V6 or your GT, or you just want to add a little stealthy styling to your front bumper, then you'll want to check out a set of these smoked side marker lights today.
Technical Note. These Smoked Mustang Side Marker Lights are designed to reuse the factory bulbs to save you money.
Fitment: 2010 2011 2012 2013 2014 Details
MPN# 42018
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Installation Time: (approx) 45 Minutes
Difficulty Level:Simple installation for anyone
Have they fixed the issue many reviewers mentioned of the connections being the wrong size and requiring you to purchase additional hardware?
We have received a new batch of the Axial Smoked Side Marker Lights with the correct sized posts.
Would these also replace the rear side markers?
No, these are designed only for the front marker lights
Installation Time:Less than 1 Hour
Installation Cost:0-$100
Installation Time: Less than 1 Hour
July 21, 2018
SMOKED MARKER
NICE PART GOOD PRICE LOOKS GREAT WISH THAY MADE IT FOR THE REAR
Installation Time: Afternoon
May 04, 2018
Love these marker lights
The product itself is great, Perfect fit, and looks beautiful. I am happy with how perfect the shade of smokiness is. It took me a while to install, as it was a really awkward location and I couldn't see what I was doing, without taking the bumper off. If you work around cars often, you would probably install this in less than an afternoons timing.
Installation Time: Less than 1 Hour
March 17, 2018
Great looking lights
We were very happy with the lights we got they look so very nice. Thank you for coming though again for us.
Installation Time: Shop Install
Installation Cost: 0-$100
February 28, 2018
Axial smoked side marker
The only thing I didn't like about these are u have to take the bumper off before installing wish they told you before purchasing.
Installation Time: Less than 1 Hour
December 21, 2017
Awesome
The smoked sidemarkers look great in my ride!! Installation wasnt as simple as the instructions provided. I had to remove the front tires in order to get easier access to the markers, but overall not too difficult to install. Gave the car a more sinister look!!!
Installation Time: Less than 1 Hour
February 20, 2017
Great Addition
With very few spots on my Mustang being brighter (prefer the agressive look), being able to darken these markers makes a world of difference. Really wish they made rear marker too though.
Installation Time: Less than 1 Hour
December 29, 2016
Looks good
The lights look rally amazing in my 2011 mustang and they were easy to install.
Installation Time: Afternoon
April 21, 2016
Makes it look awesome
Nice product. Pain to instal but looks amazing. It was not smoked enough from for me so I added three light coats of Nyteshade to make the marker darker and installed amber LED lights and works great. Wish they had a pair for the rear. I had to Nyteshade them and install red LED lights for an awesome daytime black out effect.
Installation Time: Less than 1 Hour
January 07, 2016
Smoked marker lights
Looks great. Nice affordable upgrade. Easy to install. Took me less than 30 min
Installation Time: Less than 1 Hour
October 12, 2014
Low quality, but look good installed
Very low quality for $50 lights, one of the ports where the light plugs in was miss shaped, was able to fix it without breaking it, and get it inserted and twist in somehow, the posts everyone said were to small, must have been changed, because they are the same size as oem, I just can not get over how low quality these are, the only decent looking part is the outside lens, they do look good after being installed, but That doesn't justify $50, I think $15 would be a better price for them
Installation Time: Afternoon
August 19, 2014
worth the effort?
the cost is great but if you're only doing these you will still need to pull off your bumper. not sure if it's worth it for something so small. I would wait and do when doing headlights or a grill. something like that.
Installation Time: Less than 1 Hour
November 20, 2013
Ford should of used them from factory
Great fit looks so much better the factory amber The amber corner lights stuck out like a sore thumb these lights pervide the sleek stealth look.
Installation Time: Less than 1 Hour
April 09, 2013
Hardware would be nice
Before I get into this review I do have to say once installed these things look great. Getting there was not fun though. The lights fit in the bumper cover fine but the posts for the nuts were to small and I could not install the nuts properly. For the price that is charged for these putting a little extra material on the mounting posts should happen. A lot of people have had the same issues with these as I have. They need to have a larger mounting post or supplied nuts for proper install.
Installation Time: Less than 1 Hour
February 12, 2013
Smoked Out
The smoked side marker lights look amazing! Take the old yellow marker off and put the new blacked out marker in. It was very simple and can be done by using basic hand tools and the provided step by step instructions. The plastic pegs used to retain the marker were small and I had to bend the little metal fasteners to get it to thread itself on tight enough to hold it in place.
Installation Time: Less than 1 Hour
January 09, 2013
Looks good
The markers look great once I finally got them installed. The nuts that came off the original did not work for me. They are way too big. I ended up using a nut kit for a 5/32 stud. Great looking product but I wish they were supplied with the correct mounting hardware.
Installation Time: Less than 1 Hour
December 28, 2012
Great product, hardware included would be nice
Overall really great product, it removes the yellow corner lights and adds the blackout look I was going for. Quality seems good enough but like everyone else has said, the factor nuts don't fit the bolts on this one without some "help" I added 1 wrap of duct tape to give them something to bit into and it seems to have worked. I will see if it lasts or if I need to get a smaller size and reinstall. I really like them and would still recommend them but it would have been nice if these studs were the same size as factory or if they provided the needed hardware for this size.
Installation Time: Less than 1 Hour
November 21, 2012
Look Fantastic. Annoying to Install
These really help finish off the look I was going for on my Race Red 2011 GT. Keeping the theme of red and black, I purchased these to get rid of the orange corner marker lights. They are factory quality and look perfect. They do dim the lights down quite a bit, but seeing as how they are not the actual "blinkers", I'm ok with it. Installing them was an absolute pain. I didn't want to have to remove the wheels, or put the car on a lift or stands so I loosened the inner fender and squeezed my hand in between it and the bumper. Took 30-45 minutes, but well worth it.
Installation Time: Less than 1 Hour
October 28, 2012
Looks great
These smoked side markers really improve the look of my mustang. Looks way better than the amber lights it comes with.
Installation Time: Less than 1 Hour
October 05, 2012
Look great - stock retainers don't fit.
The yellow lenses on my original side marker lights just fell off! Maybe it was the automatic car washes. These look good, and hopefully the lenses will stay on. As others have pointed out, the stock push-on retaining nuts don't fit, and you will have to go buy some that do before you change them out. For this amount of money, surely they could have thrown in a couple of 5 cent nuts.
Installation Time: Afternoon
June 10, 2012
STUDS NOT FACTORY SIZE
I was disappointed in the lack of instructions provided with this product. My car didn't disassemble as easily as the video implies. I ended up removing the cover under the bumper and accessing the lights that way. This option would not have worked for my husband for obvious space issues. The old fasteners did not work since the studs on these replacement lights are smaller than the factory studs. After a trip to the auto parts store for smaller fasteners and amber colored light bulbs (my preference) the installation was quick. They turned out looking great!