(approx) 30 Minutes
Simple installation for anyone.
- Customer Submitted:
- 3-Light LED Tail Light (99-04) - Installation Instructions
$152.99 (pair)FREE Shipping
Hey everyone, I’m Justin with AmericanMuscle.com, and I’m here with a way to completely set your ride apart from the pack, thanks to these black LED taillights for all ’99-’04 Mustangs. These lights feature a completely unique design that utilizes modern LED technology with the same three-bar lighting pattern as your OEM lights. Those LED lights are going to be a nice improvement over your weak incandescent factory lights, meaning increased safety and visibility. Part of the aggressive styling can be attributed to the all-black housing, paired with those crystal clear lenses. Because these lights include the additional wiring harness, making them completely plug-and-play, installation should be very straightforward, and should take you no more than 30 minutes from start to finish. If you’re really digging that LED look and you want more, then you might want to pair these taillights up with a black LED third brake light, like what we’ve done with our V6. So if you want to give your New Edge Mustang some modern styling that’s sure to get you noticed at shows and on the road, you’ll definitely want to check out these LED taillights for your ’99-’04 Mustang.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Technical Note. Does not work with sequential tail light kits.
Fitment: 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 13, 2020
So satisfied with my new taillights,price was reasonable,looks like a new mustang,getting alot of looks.For how long it took to install,was worth every bit ..Helpful (0)
December 27, 2019
After Market Tail Lights
They look great and adds a nice finish. On a 2000 Tropic Green GT.Helpful (0)
November 23, 2019Helpful (0)
April 28, 2019
I got this tail light for an upgrade look. The led makes it look much better then stock. It's bright nd vivid any time of the day. Plus it was also easy and fast to installHelpful (1)
January 20, 2019
Perfect thank good good Perfect we have to wait good produceHelpful (2)
June 16, 2018
Easy and Good Looking
Taillights look amazing easy to install shines bright at night and definitely a must mod.Helpful (5)
May 06, 2018
looks good but confusing
looks great but it could've had installation instructions on where the plug and play went. had to google how to install and when i did i plugged it into the wrong one and had to take apart and plug into the proper bulb insert. other than that great and looks fantasticHelpful (4)
April 06, 2018
Head and rear lights
Totally satisfied with my led head and rear lights for my mustang!!! I've been getting great looks and I've recommended a few people to American Muscle to make a purchase or two! My lights were delivered very quick and was surprised that I wasn't charged a shipping fee... Thanks for my good quality lights!!!Helpful (5)
November 01, 2017
I thought I was getting the 3 tail lights. Right side, Left side, and third break light. That’s what the pic and description led me to believe. Then after I recieve my package I only find the right and left lights. I called and was told “oh no you have to pay MORE money to get the third break light”.... Now I’m going through the same thing again with the rear black out decals. You have to buy the bottom one separately and again pay more money.... Very unhappy customer....Helpful (6)
July 23, 2017
Great lights and good looking easy installation and low priceHelpful (5)
Sequential Taillights? Would these taillights work with the sequential taillights mod?
Unfortunately not. LED taillights will not work properly with the sequential harness.
will these tail lights ever get sequential that can be used with this? I bought some of these from an individual and would like to know if that will ever happen.
The Black 3-Light LED Tail Lights (99-04 GT, V6, Mach 1) will not work in conjunction with sequential tail light kits.
do i have to seal these tail lights? i know lots of after market lights have to be sealed to block water from getting in. do you have to with these?
When you are installing Black 3-Light LED Tail Lights (99-04 GT, V6, Mach 1), you do not need to seal the lights. While it is not mandatory to seal them, I would recommend using silicone to do so because it will give you extra security to make sure no condensation gets into the lights.
Are these as dark (when lights are off) as the regular style smoked tail lights
The Axial Black 3-Light LED Tail Lights utilize a clear lens, so you will be able to see into the housing better than with a smoked lens on a smoke tail light.
reverse light As this is plug and play, is the reverse light standard or LED? If standard can it be converted to LED?
It uses the factory reverse lights, But American muscle offers a conversion kit for $39.99 in the LED bulbs section of lights. They are definitely a new look to your stang I have them.
The cobras have a different wiring harness because of the amber taillights you can swap to a gt harness and they would work.
The LED's in the Black 3-Light LED Tail Lights are not designed to be changed, however, if one is to go out, and the bulb is accessible, there would be a model number on the bulb, which would be used to acquire a new bulb.
The LEDs are bright enough they would shine through better then factory taillights with covers on them.
(approx) 30 Minutes
Simple installation for anyone.
What's in the BoxHardware included:
Does not fit 1999-2004 SVT Cobra's