(approx) 15 Minutes
Simple installation for anyone.
- Customer Submitted:
- Mustang Taillight Cover Installation Guide (99-04)
$54.99 (pair)FREE Shipping
Hey everyone, I’m Justin with AmericanMuscle.com and I’m checking out these smoked taillight covers for all 99-2004 v6 and GT mustangs. These covers are a must if you are looking to achieve that blackout styling that’s very popular with both mustangs new and old. Now these are also friendly on your budget as opposed to going for a full taillight replacement as well. Now technically they are smoked lenses but as you can see on our V6 back there, their definitely a little bit more of a total blackout. The kit is made of a durable acrylic composite material and features easy on and easy off Velcro installation. That means that these would be perfect for those who like to switch up the look of their ride often or you just want to use them for shows. All you need to complete the install is included with the kit itself, now the installation is extremely easy and requires no drilling, glue or any permanent modifications. All you do is simply adhere the covers to the factory tail lights using the supplied 3M tape and a little bit of Velcro. That’s it; installation should take about 15 minutes. As you can see once these covers are installed it transforms the rear end of your mustang from mild mannered to “don’t mess with me” in a blink of an eye. We also happen to have the sequential tail light kit installed on this car and you have to admit together it looks pretty cool. Now in my opinion the cherry on top would be the smoked 3rd tail light would totally complete the look. So if you’re going for the total blackout stealth look or you just want to turn up the aggressive styling for shows the smoked tail light covers for your 99-04 mustang might be worth the look.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
September 30, 2019
This made my car look like a newer car I have a 2000 mustang and it is running with the big DogsHelpful (0)
June 15, 2019
Looked good, but one problem.
Once I recently purchased them I was driving on the highway and one of the covers flew off after I specifically followed the guide on how to put them on.Helpful (1)
April 26, 2019
Great rear look!
Easy to apply. Looks great and fits even better. At first I was afraid that the wind might carry my tail light lens cover away but stayed secure.Helpful (0)
March 29, 2019
Looked awesome for the price
I cleaned everything with alcohol and uses strips provided. Felt like it had a secure fit but lost one on highway. May have to replace strips with stronger 3m adhesive strips.Helpful (1)
March 20, 2019
Smoked tail light covers
Easy installation. Had an issue with double sided tape holding. Spend the extra money and get the smoked lights that swap out the original.Helpful (0)
February 04, 2019
Looks great but the adhesive is not the best and I actually lost one going down the highway . Looks great just needs better gripHelpful (4)
January 22, 2019
tail light covers
easy to install and they look great. The covers give the car a stealth look. Very happy with the results.Helpful (4)
January 05, 2019
Doesn't fit. Adding extra words because I have to do so.Helpful (4)
October 16, 2018
1 fell off while driving :(
Beautiful and well fitting but the tape isn’t strong enough to hold it on. One fell off while I was driving literally an hour after I put it on and I can’t find it so right now there’s only one on my car sadly. I put extra double sided tape just in case to make sure it holds but I guess that wasn’t strong enough. Now I’m stuck in a rut I don’t wanna pay a full 54$ for only one side of the pair but it looks really weird without both sidesHelpful (5)
October 06, 2018
Great quality but one of the covers were missing the Velcro.Helpful (4)
I have a 2K, V6 convertible which I take to a local car wash for a good clean once a month. Will these tail light covers take a "Power" wash? (the spinning brush type)
The Smoked Tail Light Covers should hold up to the automated wash, however, excessive force can indeed remove or damage these covers.
All year round? Canada Will these covers fall off in the winter? it gets to -40 degrees here and will the tape hold? and is it ok to use a pressure washer with these on? thanks in advance.
the tape will hold...just make sure you put the tape on in 80 degree weather it has to cure in hot weather...if it comes loose use 30 min clear silicone.....be very careful with that pressure washer around those tailights...
Think I will be able to keep these on, year round? through winter and such? or will they loosen and fall off?
If installed correctly you shouldn't have to worry about them falling off due to weather/temperature.
Do these work with the Raxiom Sequential Tail lights?
If you are referring to these sequential tail light kit here: https://www.americanmuscle.com/sequential-taillights-plugin-9604.html, the tail light covers will work with that kit.
Will I get a ticket for these. Can you see the signals in daylight?
We would recommend reaching out to local shops and law enforcement to see if this would be illegal in your area.
I do apologize about that! Please contact us via phone or send us an email so we can further assist you with your issue:http://www.americanmuscle.com/contact.html.
If you had an issue with the product following installation, reach out to our customer service team to review the issue with you first hand! https://www.americanmuscle.com/Customer-Service-Pages/Contact-Us/
We would advise to use a blow dryer to heat up the area where the double sided tape is applied.
The SpeedForm Smoked Tail Light Covers will fit all model Mustangs from 1999-2004.
As long as the SpeedForm Smoked Tail Light Covers sit flush with the tail lights, you will experience any issues of moisture build up.
The Smoked Tail Light Covers (99-04 All) is a direct cover over your stock taillights. However the covers will not even the color of the light that is projected out of the original taillights. Also, depending on which state you are in, there may be restrictions that do not allow you to use these. Please check your local and state ordinances for usage regulations.
Yes, the LED lights will work with the Smoked Tail Light Covers.
yes they will very easily
(approx) 15 Minutes
Simple installation for anyone.
What's in the BoxHardware included: