Aeromotive BoostWorx Fuel Module Control System (07-14 Mustang GT500)Find parts that fit my vehicle

The BoostWorx Ford Mustang GT500 fuel module control system has everything needed to provide a stand alone, manifold referenced, OE-type returnless fuel system.

When used with the low-cost Ford/Motorcraft PFS1314 fuel module the system will provide a 42-60psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25psi of boost. It will act just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The fuel injector does not know if the fuel supplied is pumped by a return or returnless system. Every OEM today, even on the highest horsepower models, use returnless PWM control systems.

The key to making this system simple to use is the stand-alone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure.

Just like a manifold referenced mechanical fuel pressure regulator, simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. Base fuel pressures at idle are typically between 42-60psi, but the VaporWorx controller has much greater range if needed.

The BoostWorx controller can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure. The kit is tailored to fit the PFS1314 fuel module by using the OEM Delphi/Aptive connector and terminals.

The fuel requirements for all versions of the Ford Controls Pack for the Coyote crate engine can be met with the BoostWorx GT500 controller and PFS1314 fuel module.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov