American Racing Solutions Single Bearing Smooth Pulley; 63mm x 8-Rib (Universal; Some Adaptation May Be Required)

Description. 63 MM x 8 Rib Smooth Pulley

All of our pulleys are fabricated from 6061-T6 Billet Aluminum and Clear Anodized to create a hardened surface.

Upgrade your pulley to Ceramic Bearings!

Serious racers are constantly pushing the envelope, and everyone knows that shaving off .001’s of a second from their ET, which translates into more win lights.

Ceramic hybrid bearings use ceramic balls and steel races. Ceramic balls weigh up to 40% less than steel balls, depending on size. This reduces centrifugal loading and skidding, so hybrid ceramic bearings can operate up to 50% faster than conventional bearings. This means that the outer race groove exerts less force inward against the ball as the bearing spins. This reduction in force reduces friction and rolling resistance. The lighter ball allows the bearing to spin faster and uses less energy to maintain its speed.

Ceramic silicon nitride balls exhibit much higher hardness than steel balls resulting in at least ten times greater ball life due to the ability to hold the surface finish longer. The ball has dramatically smoother surface properties than the best steel ball resulting in less friction between the balls and bearing race surfaces. Thermal properties are also significantly improved over steel balls resulting in less heat buildup at high speeds. Ceramic has 35 percent less thermal expansion, 50 percent less thermal conductivity, is lighter weight, and is non-corrosive.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov