$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Axial Sequential LED Tail Lights - Red Lens (99-04 All, Excluding 99-01 Cobra)

Market Price $414.39 You Save 11% ($44.40)
Our Price

$369.99 (pair)

FREE Shipping
  • Item 397384
  • MPN# 397384

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Bold Modern Styling
  • Built-In Sequential Turn Signals
  • Red Lenses with Red Diffusers
  • Super Bright LED Technology
  • Direct Plug and Play Installation
  • Driver and Passenger Side Included
  • Fits All 1999 to 2004 Mustangs, Excludes 99-01 Cobra

Review & Installation Video

Review & Install Video

Bold Modern Styling. Do you have an urge to update the exterior styling of your 1999-2004 Mustang? If so, you should check out a set of Axial Sequential LED Tail Lights. Axial's Tail Lights feature classic red lenses with three red inner LED diffusers that will totally transform the rear of your New Edge Mustang when you apply the brakes. These Axial Tail Lights even sequence when the turn signals are activated and feature three rectangular reflectors located along the bottom edge for bold looks and additional safety.

Sequential Turn Signals. These Axial Tail Lights are designed with a very popular component that not only looks awesome, but supplies an added bit of safety when out cruising. When the turn signals are activated, they will sequence from the center light out and repeat until switched off. Please note that these lights do not sequence with the brake or hazard lights.

Quality Construction. Manufactured from the OEM quality materials, this set of two Axial Tail Lights feature black housings with red lenses and three red inner diffusers. These Tail Lights employee high intensity LEDs for both brake and reverse modes, that are much brighter than the standard factory incandescent bulbs, to make sure you are seen in all weather and lighting conditions.

Plug and Play. Installation of these Axial Tail Lights could not be any easier. Simply disconnect the connector from the stock wiring harness and remove your current tail lights. Plug in the supplied wiring connector of your new Axial Sequential LED Lights and reinstall. It's a simple upgrade using basic hand tools that should take no longer than an hour to complete.

Application. These Axial Sequential LED Red Tail Lights are specifically designed to fit 1999 to 2004 V6, GT, Bullitt, Mach 1 and 2003-2004 SVT Cobra Mustangs. They will not fit 1999-2001 SVT Cobras equipped with amber turn signals.
What's in the Box
  • (1) Left Hand - Driver Side Tail Light
  • (1) Right Hand Passenger Side Tail Light
Installation Info

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Maxsequential

Love theses tail lights,I love that it looks like a rearend of a newer mustang,so much brighter.I love that I can actually see to back up,I love the look.most of all I love the Sequential effect,little ...

Read More
Helpful (1)

5/5
AMAZING

Taillights fit perfectly and gave me the look I was going for. Remind me kind of like a newer mustang which is perfect for the guys with older cars. Would highly recomend to anyone looking at purchasing, ...

Read More
Helpful (1)

Overall Rating 5 out of 5 stars
Read All 2 Reviews

Customer Photos (4) Submit Your Photo

View All 4 Photos

You Might Also Like

5 Questions / 6 Answers

Ask a Question

Hi , i need amber rear indicators for uk spec , i know that the lower inner lense is the back up lamp but can you tell me what coluor the lower outer portion lights up if at all ? also could the wiring possibly be altered to act as a normal brake / tail light without the sequential action? . since 99 cobra rear tail lamps are very rare im struggling to find a nice looking tail light to put on my car and convert the lighting to UK spec .

StephenF

  • The lower, outer portions of the tail lights are red. The sequential setup cannot be removed, but will only flash sequentially when the turn signals are active. Additionally, the Axial Sequential LED Tail Lights do not fit a 99 Cobra.

    VincentV

Helpful (0)

Do the MMD Tail Light Bezel Trims (71325-88 in chrome, 71325-99 in matte black, 71325-zz for various pre-paints) fit these like the stock lens?

04GTRagTerry

  • The Axial Sequential LED Tail Lights will share the same basic lens design, allowing the MMD Tail Light Trim to be used without issue.

    Rob D

Helpful (0)

How's the sequencing speed of the taillights? Is it like the regular taillights with the flasher installed, or is it more like the 2010 and up mustangs?

RobertG

  • They sequence at the same rate as the newer Mustangs. That's with the stock flasher installed and LED switchback turn signals up front. I couldn't get these tail lights to work with the modified flasher while have the switchbacks installed. If you have normal non-LED turn signals then you can use the V2 flasher for slower sequencing.

    BrandonC

Helpful (0)

Has anyone had any problems with the lights flickering while the turn signal/hazards are on at the same time the running/head lights are on? I have a few lighting mods installed and am wondering if one of those may be interfering with these tail lights.

BrandonC

  • I figured this one out after testing a few of my other mods. For anyone who may also run into the problem all you need do is either add a resistor to each front turn signal or install the V2 modified LED flasher. Or both. I found that you can have to resistors and the flasher installed and they work fine.

    BrandonC

Helpful (0)

I already have seguential tail lights but I like these do I have to take the flasher out and put original back in to use these

Joyce03

  • I found my previous answer is only partially correct. They do not work with the V1 modified flasher but will work with the V2 flasher.

    BrandonC

Show 1 more answer Helpful (0)

More Products You Might Like

Customer Reviews (2) Write a Review

Overall Rating 5.0

out of 5 stars

Installation Time:Less than 1 Hour

  • Visibility 5 5
  • Fit 5 5
  • Appearance 5 5
  • Bang For Your Buck 5 5



  • 5/5

    Installation Time: Less than 1 Hour

    March 18, 2017

    Maxsequential

    Love theses tail lights,I love that it looks like a rearend of a newer mustang,so much brighter.I love that I can actually see to back up,I love the look.most of all I love the Sequential effect,little pricey,but WELL Worth it.I would tell people to buy them,And my husband said that was the easiest thing he has put on my stang,Thank you American Muscle.

    Joyce03

    Year: 2003 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    February 19, 2017

    AMAZING

    Taillights fit perfectly and gave me the look I was going for. Remind me kind of like a newer mustang which is perfect for the guys with older cars. Would highly recomend to anyone looking at purchasing, ... thank you american muscle!

    Tony

    Year: 2004 Submodel: GT

    Helpful (1)

Related Mustang Categories