Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$4,500 Giveaway! 3 Winners Enter Now

American Muscle Graphics Black Lemans Stripes - 8 in. (05-14 All)

Item 26053G05
$0.00
Market Price $114.99 You Save 13% ($15.00)
Our Price

$99.99

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

      Review & Installation Video

      Hey I’m Justin with AmericanMuscle.com and I’m checking out some of our AmericanMuscle Graphics Lemans stripes options available for all 2005 and up Mustangs. Lemans stripes originated on the race track back in the 50s and later Carol Shelby used them on his race cars as well. Eventually they found their way over to the production model 60s Mustangs, and of course the Shelby GT cars. These lemans stripes from AmericanMuscle Graphics are available in either an 8 or 12” width, and in your choice of either black, matte black, silver, white, red, or blue. All of our AmericanMuscle Graphics have been constructed from high quality premium cast vinyl, which will last for years without fading or peeling. Secondly, every one of our vinyl designs is test fitted on our own cars first, before being sent into production, ensuring a perfect fit on your ride every time. The install will take a little time so just be prepared, I will say that working with any vinyl can be a little tricky but we make it a little easier for you by breaking this kit down into three separate panels, and by including some very detailed instructions along with the kit. Before you get started, you will need some essential tools, of course we’ve got the soap and water mixture, a razor exacto knife, the included squeegee, some painters tape, and maybe a pin or a needing just to release any excess bubbles. This kit does require a lot of patience when it comes to the install, so that’s why we’re calling it 6 hours from start to finish, but don’t be upset if it takes you a full day. So while other cars might try and sport lemans stripes, I think there’s no denying they look best right here on a Mustang. So with that said, check out one of our many lemans stripes options right here at AmericanMuscle.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • Classic Lemans Styling
      • Premium Cast Gloss Black Vinyl Material
      • Includes 3 Pre-Cut Sections for Easy Installation
      • Dual 8" Wide Stripes
      • Fits All 2005 to 2014 Mustangs

      Description

      Classic Lemans Styling. Give your Mustang the classic styling of yesteryear with a set of Gloss Black Lemans Style Stripes. These AmericanMuscle Graphics Gloss Black Lemans Stripes will look great on any model Mustang.

      Perfect Fit Guaranteed. AmericanMuscle Graphics vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

      Superior Quality Materials. AmericanMuscle Graphics uses only the highest quality Premium Cast Vinyl available on the market today - designed to last at least 8 years of harsh outdoor weather. It's far more durable than our competitors' cheap, calendared vinyl film which starts to degrade in just a couple of years!

      Application. These high quality AmericanMuscle Graphics gloss black vinyl 8" Lemans Stripes will fit any 2005 to 2014 Ford Mustang, including the V6, GT, Bullitt, and Shelby models.

      Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

      MPN# 26053G05

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      4.5

      Customer Reviews (19)

      Write a Review

      Ratings Summary

      4.5 out of 5 overall rating from 19 customers

      Installation Time: Full Day





      • September 26, 2019

        5 2012 V6 - Anonymous Installation Time: Full Day

        5/5 would recommend

        Stripes were of good quality and turned out great, just take your time and go slow. No need to rush, the more time you take, the better the finish stripes will turn out. Would definitely do again on a different mustang.

        Helpful (0)
      • June 27, 2018

        1 2010 V6 - LeonardoM

        Wasn’t able to install it right

        Ended up throwing away the stripes poor quality waste of money

        Helpful (4)
      • March 28, 2016

        1 2008 V6 - KC22

        Can't use These

        The stripes had wrinkles and are uninstallable so we are sending them back.

        Helpful (6)
      • February 25, 2016

        5 2012 GT - talkingrock Installation Time: Afternoon

        sharp ride

        we bought these in December and paid a stripe guru $175.00 to do the install these were top shelf was his remark only took 3 hrs. they look great buy these with confidence

        Helpful (6)
      • May 13, 2014

        4 2014 GT - GTinSeattle Installation Time: Weekend

        Not easy but worth the time

        First off I was going to have an auto detailer install the stripes because I was scared of doing this work on my new Mustang. The quote was 7 hours for $352 to cover installation. Last weekend I had a spare day so I decided I would try to install them myself. In Seattle it was a warm day, 67, but cool in the morning. First, external temperature makes a huge difference in how long these take to dry to you can remove the backing. When I did the hood in the morning it took more than 3 hours to dry properly versus the truck which took about 30 minutes. AM seems to send you enough vinyl that if you screw up a major section like I did there is enough extra to replace it. I have about 10 hours into the project and I still have a few more hours to finish. The hood, assuming you have the stock 2014 hood is pretty easy. I was able to put this on without cutting the stripes down the middle and putting them on in two pieces. I tried the tape down the middle but I found the best way was to put it down wet and slide it around until I had equal distance from the outside stripe to the outside hood. The roof was a little more complex. Originally I tried to put it on all as one piece but the contour of the roof is different. You can't get a 2 inch middle all the way without the vinyl wrinkling. Here is where I ripped off the vinyl and used a new piece. I cut it down the middle and put them on individually. This made it much easier and I wound up with no wrinkles. There will be a section of the roof that has a space of about 2 1/4 inches instead of 2 but you can't notice it. The trunk is pretty straight forward but the tricky part is the spoiler and the bumpers. Lots of curves. I haven't gotten the spoiler done yet because it is like trying to gift wrap a basket ball. I suspect I am going to need to do the same thing I did with the front bumper. Using a heat gun I will apply the vinyl and then apply heat slowly to shrink the vinyl in the specific areas needed to it won't wrinkle. The rear bumper will also take this kind of attention if you want to have something professional looking. This is from a first timer. I am not experienced at body work and really wanted to make sure I did a very professional job. I suspect I will have about 13 or 14 hours into it before I am finished. It does change the way the mustang looks though. Just take your time and don't rush it.

        Helpful (7)
      • May 18, 2013

        4 2007 GT - Johnnydarko138 Installation Time: Weekend

        Good, but not easy

        These look really great, but installation time took several days. Also installing the stripes on the bends of the bumper is pretty tricky to do successfully; help is recommend. That being said, the product is great quality and the look is amazing!

        Helpful (10)
      • January 18, 2013

        5 2013 V6 - kdean0120 Installation Time: Afternoon

        Outstanding Product

        When i first got the stripes they came in a box with all the instructions on how to install them. Americanmuscle was very fast and the product that they sent was outstanding. I will always use american muscle for every single product that i buy! Installation took a little while but, for the way it changed my car it was well worth it!

        Helpful (7)
      • September 22, 2012

        5 2013 V6 - john68 Installation Time: Afternoon

        Anybody can install

        These stripes made a world of difference to the apperance of my 2013 Stang. With the heip of my 14 yr old son, it took just a little over an hr to install. My advice is to have help and to measure twice. If you do that you will be quite pleased.

        Helpful (7)
      • August 25, 2012

        5 2011 V6 - Mustangboy41 Installation Time: Afternoon

        Thanks American Muscle

        This product was easy to install, thanks to the pre-cut sections. My Mustang looks great and I'm sure these stripes will last for years! Many thanks!

        Helpful (7)
      • March 14, 2012

        5 2010 GT - RickStangGT Installation Time: Afternoon

        Great 8" LeMans Stripes and Look

        I'm very happey with the stripes and ease of application, but not Super happy with the applicator i recieved with the stripes, I found out you CAN NOT use the applicator directly on the stripe sureface because it has too many rough edges that will leave marks on the tape, luckily because I have a rag top, I had plenty of extra tape to pull and replace the damaged piece. Otherwise looks great!

        Helpful (5)

      Questions & Answers (2 answers)

      2 Top Rated Questions

      Fitment on a cowl hood?! I have a 3 inch cowl hood and was looking to get them, but have held back because I don't want the measurement for the hood portion to fall short. Would they fit?!

      • No it will fall short on one end or the other. The stripes are cut to perfectly fit the factory hood any changes will make the stripes short

      Helpful (0)

      Stripes and washing? Once you have applied the stripes onto the car, say a week or so later and anytime after that can you go to a car wash (non touch) and wash your 'stang with the power washer? Will anything happen to the stripes, or is it perfectly safe just as long as you dont go 1" away from the strip with the power washing head?(not that we would)

      • We recommend never to power wash directly onto any vinyl. You can go through car washes and the best option is to hand wash, but don't power wash; it can harm the stripes no matter how long the stripes have been on the car. Hope this helps!

      Helpful (0) Show 1 more answer
      Post Your Question

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Hood/Front Bumper Stripe
      • (1) Roof Stripe
      • (1) Trunk Stripe
      • (1) AmericanMuscle Instructions
      • Tools included:
      • (1) Squeege

      Tech Specs

      Specifications
      • Fits: all 2005 to 2014 Mustangs
      • Material: Vinyl
      • Color: gloss black
      • Hood Stripe: 102” long by 8” wide
      • Roof Stripe: 74” long by 8” wide
      • Trunk Stripe: 74” long by 8” wide

      Will It Fit My Mustang

      • Boss 302 - 12, 13
      • Bullitt - 08, 09
      • GT - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
      • GT500 - 07, 08, 09, 10, 11, 12, 13, 14
      • V6 - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14

          Related Mustang Categories