Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter daily!

Borla Stinger S-Type Axle-back Exhaust (13-14 GT500)

AmericanMuscle no longer carries the Borla Stinger S-Type Axle-back Exhaust (13-14 GT500). Please check out 2010-2014 Mustang Axle-Back Exhaust for an updated selection.

Features & Details

  • Aggressive V8 Sound
  • Quad 4" Polished 304 Stainless Steel Tips
  • 2.75" Mandrel-Bent Stainless Steel Construction
  • High Flow Stinger Mufflers
  • Fits 2013-2014 Shelby GT500 Mustangs
Aggressive V8 Sound. Add Borla excellence to your Shelby GT500 Mustang with a Borla S-Type Axle-Back exhaust system for an aggressive V8 muscle car sound that will make everyone jealous.

High Quality Construction. Constructed from ultra smooth mandrel bent 2.75" stainless steel tubing to improve exhaust flow the Borla axle-back exhaust system features two turbo style "Stinger" mufflers with dual 4 inch polished stainless steel slant tips for aggressive sound and impressive looks.

Application. This Borla S-Type axle-back exhaust system is specifically designed to be a direct bolt on upgrade for the 2013-2014 Shelby GT500 Mustang equipped with the Supercharged 5.8L engine.

Fitment: 2013 2014 Details

MPN# 11830

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Driver Side Muffler Assembly
  • (1) Passenger Side Muffler Assembly
Installation Info
Tech Specs
Cat-Back Exhaust Specifications
Piping Material: Stainless Steel Tip Material : Polished Stainless Steel
Piping Size: 2.75" Tip Size: Quad 4"
Muffler Type: Turbo Fitment: 2013-2014 Shelby GT500 Mustangs
Will it fit my Mustang?

    Customer Photos (3) Submit Your Photo

    View All 3 Photos

      Questions & Answers (5)

      5 Top Rated Questions

      If you installed the GT500 rear valance on a 14 GT, would these fit?

      • If you have the Ford Performance Shelby GT500 Rear Valance (13-14 All) item #53717 ( you will be able to fit the Borla Stinger S-Type Axle-back Exhaust (13-14 GT500) on your 2014 GT because the piping size on the Borla Stinger S-Type Axle-Back Exhaust (13-14 GT) item #29032 ( and Borla Stinger S-Type Axle-back Exhaust (13-14 GT500) have the same piping size.

      Helpful (1)

      I have a 2016 gt premium and am currently running roush quad tip axle backs with a trufiber quad tip valance, would these s type axle backs fit with the trufiber carbon valance?

      • Unfortunately, this exhaust is designed for the 2013-2014 GT500 Mustangs and will not bolt up to a 2016 GT Mustang with the trufiber carbon valance.

      Helpful (0)

      Would these quad tips fit on a 2014 v6 mustang with BBK off road X-Pipe with long tube headers? And of course I would get the gt500 rear valance..

      • We would not be able to guarantee fitment for that setup due to it being specific for the GT500, however, with all of those parts, it should be able to mount up without issue, but a test fit would be recommended before install.

      Helpful (0)

      would these fit on the non gt500, but onto the 2014 v6 mustang if the gt500 valence/bumper were installed to fit the quad tips? Or if I need to modify my car, what modifications do I have to do or get to be able to make it fit ?

      • The modifications would be on the exhaust to make it fit as these are not designed to work on a V6 exhaust.

      Helpful (0)

      Would this fit on a 2014 v6 mustang if I add gt500 rear valance?

      • You may very well have to modify your existing exhaust to get the exhaust to install properly, but otherwise that's a fine solution!

      Helpful (0)
      Post Your Question

        Customer Reviews (5) Write a Review

        Overall Rating 5

        out of 5 stars

        Installation Time:Full Day

        Installation Cost:$100-$250

        • Loudness / Volume 4.8 4.8
        • Exhaust Note 5 5
        • Fit & Finish 5 5
        • Bang For Your Buck 5 5

        • 5/5

          Installation Time: Shop Install

          Installation Cost: 0-$100

          June 18, 2017

          Amazing look!!

          Yes this is a very pricey product, however the look and sound you get is absolutely amazing. This exhaust or teh catback version, even with headers and a mid-pipe keeps the noise just below the point of being obnoxious. LOUD COLD-STARTS, so, neighbors beware lol IMPORTANT. This is the easiest to fit on your GT if you have the California Special ,becuase you can easily swap the rear valence with teh GT500 counterpart for an easier install. If you have a plain GT, you might need to cut the bumper a bit


          Year: 2013 Submodel: GT

          Helpful (11)

        • 5/5

          Installation Time: Less than 1 Hour

          March 03, 2017

          Borla S Type

          Best exhaust I've heard hands down. Loud but not too loud and the perfect sound. I went from Roush with Off road H pipe to Borla S Types with off road H pipe and it's so much better. Worth the money.


          Year: 2014 Submodel: GT

          Helpful (12)

        • 5/5

          October 05, 2016

          Can't go wrong with Borla!

          I had the same Borla S-Type on my 2013 GT/CS so I had to go with it on my GT500 and once again no complaints from this guy! Borla really knows what they are doing when it comes to exhausts. Nice sounding tone at idle and low RPMS, and really opens up when you hit it. Only took around an hour or so to install them.


          Year: 2014 Submodel: GT500

          Helpful (11)

        • 5/5

          Installation Time: Less than 1 Hour

          May 15, 2016

          Borla stingers sound great.

          I have a 2013 gt 500 i put jba LT headers, jba hi flow cats and x pipe, I went thru a few different mufflers and after going cheap 3 different times. I bought my borla exhaust and wow what a deep mean tone, no raspy sound at all, and no noise in car but mean as ever outside when you listen to it drive away. It's not bad at keeping it quiet up to about 2000 Rpms then it makes some noise.. I'd say over all at wot it's pretty close to straight pipe loud. No popping no back firing on down shifting. I love it wish I did borla first !


          Year: 2013 Submodel: GT500

          Helpful (11)

        • 5/5

          Installation Time: Shop Install

          Installation Cost: $100-$250

          January 21, 2016

          V6 Perspective

          So I got this for my Mustang simply because the quad tips. Definitely personal preference in my opinion the sound got better coming out of the 2 tips on each side then just 1 big 4.5 inch tip on each side very please and by far whatever you get this for V6, GT, GT500 it sounds amazing!! No drone but all the noise you will ever need when you get on it!


          Year: 2012 Submodel: V6 Ellicott City, MD, USA

          Helpful (10)

        Related Mustang Categories