Boss Hog C4 Street Bandit Series Torque Converter; 11-7/16-Inch Bolt Pattern; 24-Spline; 1600-2200 RPM Stall (81-85 Mustang)Find parts that fit my vehicle

This C4 Converter has been Designed For the Big Bellhousing with the 164 tooth Flexplate.
Building High Performance & Racing Converters Since 1970! Veteran Owned and Family run
MADE IN THE USA!
Muscle Shoals, Alabama
Description
Ford
C4
Part Number 25041
NIGHT STALKER SERIES
This is a Couple of Steps Over Stock
Stall Range: 1,600 – 2,200 RPM
Great Driving Characteristics
12 inch Core
Bolt Circle: 11 7/16 inches
24 Spline Turbine Hub Precision CNC Machined
Count the Tops of Each Tooth on the Smaller Shaft
Built to 5 7/8 inch Tall
For the Big Bellhousing
Use the 164 Tooth Flywheel
Hardened Chrome Moley Impeller Hub
Torrington Style Incased Bearings
Modified Extreme Duty Stator
1.375 inch Crank Pilot Precision CNC Machined
NUT Size: 3/8 X 24 TPI (GRADE 8 ONLY)
NO – Anti-Balloon Plates
Fins are 4 corner Tac Welded or Furnace-Brazed
Leak & Pressure Tested
Digitally Balanced
Quality Inspections at Every Step
TIP : Use Old School Type F Transmission Fluid For Best Results
TIP : Always Use an Additional Transmission Cooler
TIP : Use Blue Loctite
” MADE IN THE USA “
NOTE : ALL Advertised Stall are based on a Specific Vehicle’s Setup. All stall Ranges Will Vary depending on your vehicle’s setup. Please contact us for more information (888) 267-7464
Building High Performance & Racing Converters Since 1970! Veteran Owned and Family Run.
We recommend upgrading to a “Street Bandit Series” torque converter if you have upgraded 2 items like; Intake, Heads, Headers, Exhaust, Cam, or Gearing
We recommend upgrading to an “Out Law Racing Series” torque converter if you have any Power Adders like Nitrous (NOS), Turbocharger(s), Supercharger, or a Trans Brake
Warning: Cancer and Reproductive Harm – www. P65warning.ca.gov

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov