Win A 2018 RTR Spec 3 Mustang Enter Now!
Talk to a Mustang Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Last Day for Free Delivery by Dec 24th available on most items - Details

MGP Red Caliper Covers - Front & Rear (05-10 GT, V6)

Market Price $200.00 You Save 11% ($21.00)
Our Price


FREE Shipping
  • Item 81100
  • MPN# 10197SMGPRD

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Great Custom Styling.
  • 6061-T6 Aerospace Aluminum.
  • Red Powder Coat Finish.
  • Reduces Brake Dust.
  • Easy Install.
  • Fits 2005-2010 Mustangs with 17" or Larger Rims.

Review & Installation Video

Review & Install Video

Hey I’m Justin with, and I’m checking out MGP’s front and rear caliper covers, fitting all 2005 and newer Mustangs. So here’s the deal, an aftermarket big brake kit is not exactly cheap, and painting your factory calipers can sometimes not give you the results you’re looking for. These covers from MGP are a great way to cover up those ugly factory calipers, while adding a little customization and helping to reduce the brake dust on your wheels. The covers are offered in a red or a black powder coat and with a number of different logo options. We have a couple here on the table including the red GT logo, the complete black Cobra setup, the red running Pony logo, and the black 5.0 logo, just to name a few. Taking a closer look at the calipers you’ll first notice a very durable T6 aluminum construction, along with that powder coated red or black finish. In addition we have the officially licensed logo right in the center, along with some simulated hardware for a more realistic look. The installation really isn’t all that bad and should take you about an hour from start to finish. Of course you will need to remove your wheels just to gain access to the calipers so make sure you have your jack handy. In addition you’re going to want to make sure 3/8” wrench just to tighten up the hardware on the covers themselves, but other than that everything is completely straightforward. So if you’re tired of looking at those rusty factory calipers and you don’t feel like forking out big dough for an aftermarket big brake kit, you’ll want to look into MGP’s caliper covers available right here at

Custom Styling. A set of Red Mustang Caliper Covers are a great way to set off your new rims. These Mustang Caliper Covers from MGP have a big brake race ready look that will turn heads.

Reduces Brake Dust. These Caliper Covers not only look fantastic, but they act as a dust shield to keep your rims looking cleaner longer.

Quality Construction. MGP makes their Caliper covers from light weight 6061-T6 Aerospace Aluminum that is formed to the caliper for a perfect fit. The covers are then powder coated for a long lasting high gloss look. The installation brackets are TIG welded in place for extra security.

Easy No Mess Install. Painting your calipers can be messy and time consuming, but the MGP Caliper Covers simply install over your stock calipers and are held in place with the supplied clip and bolt. For a no muss, no fuss install.

Application. Designed to fit over factory brakes, this set of four MGP caliper covers include all the required hardware needed for installation on a 2005 to 2010 and newer V6 or GT Mustang.

Fitment: 2005 2006 2007 2008 2009 2010 Details

What's in the Box
  • (2) Front Caliper Covers
  • (2) Rear Caliper Covers
  • (8) Mounting Clips
Installation Info
Tech Specs
Will it fit my Mustang?
  • Bullitt - 08, 09
  • V6 - 05, 06, 07, 08, 09, 10
  • GT - 05, 06, 07, 08, 09, 10

Fits V6 and GT's with factory brake calipers only, does not fit Shelby GT500.

Technical Note. A minimum of 1/8 of an inch clearance between the wheel and the brake caliper is required for proper fitment. We have found that the MGP caliper covers will require the use of a small 1/4" spacer to provide proper clearance with our aftermarket Bullitt wheels, see drop down option above

People Who Bought This Item Also Bought

Most Helpful Reviews

Eye Catcher

I have a highly shined '08 black GT with chrome wheels and a few other chrome exterior add on's. The first thing that everyone notices is the red caliper covers. I get tons of compliments.

Helpful (9)

Another great add-on

I did not have the thousands $ needed to get the same look that these covers provide. The install was quick and simple, the hardest part was taking the wheels off! They look great and I get nothing but ...

Read More
Helpful (8)

Overall Rating 4.4 out of 5 stars
Read All 52 Reviews

Customer Photos (71) Submit Your Photo

View All 71 Photos

You Might Also Like

Q & A

No questions about this product yet.

Ask the First Question

More Products You Might Like

Customer Reviews (52) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Afternoon

Installation Cost:0-$100

  • Fit 3.615385 3.6
  • Appearance 4.692307 4.7
  • Bang For Your Buck 3.769231 3.8

  • 5/5

    June 09, 2010

    Eye Catcher

    I have a highly shined '08 black GT with chrome wheels and a few other chrome exterior add on's. The first thing that everyone notices is the red caliper covers. I get tons of compliments.


    Year: 2008 Submodel: GT

    Helpful (9)

  • 5/5

    October 22, 2009

    Another great add-on

    I did not have the thousands $ needed to get the same look that these covers provide. The install was quick and simple, the hardest part was taking the wheels off! They look great and I get nothing but positive feedback from my friends and even strangers who ask me about them at the gas station!


    Helpful (8)

  • 5/5

    October 05, 2009

    MGP Caliper Covers

    Just installed the covers last night, hardest thing about the job was getting down on the knees and placing the jack. Installation was very easy, with absolutely no fitment issues at all. The whole job only took a little over an hour. Very little time and effort for a great look.


    Helpful (7)

  • 2/5

    August 20, 2010

    pretty cheezy

    I bought these and when I opened the box I sent them right back. They are really fake looking. Painted on bolts, etc. Take a close look a the pictures before you buy. I ended up buying them based on the reviews but the reviews where not right.


    Helpful (6)

  • 5/5

    March 19, 2010



    GREG H GT/CS L.I.,N.Y.

    Helpful (6)

  • 3/5

    December 14, 2009

    Looks Good, But...

    These covers definetly add a great look. However! My installation was a 2 HOUR ordeal! Every cover had an issue, from bolts being too long on the front pair, (which gouged my stock rims!) A bastard file fixed that issue, to having to bend the ends to keep from catching the wheel. The back pair scrape the wheel.And there is no way to secure them to the caliper.They are just riding there on the clips. I do not know how to fix this problem as the covers are flat against the caliper! Mayber over time the wheel will wear it down. These covers were installed with factory rims. Dont know if this was an issue, but I DO NOT recall a disclaimer about it either! So, BEWARE! And, the clips were NEVER an issue. So after bending, and filing, and scraping of my rims, they`re on. they look good, just dont get too close!


    Helpful (6)

  • 3/5

    April 09, 2009

    Look Great, But... careful of wheel clearance. These look awesome on my pony, but if you have purchased 18x10 or 18x9 Bullit style rims from AM, they may not clear the covers without adding a 1/8 inch wheel spacer. I scarred both the front and rear covers on first install test spin. I had to add some hub-centric spacers and repaint with some High-temp engine enamel before I could use them. All\'s good now, just know you may need to get some extra clearance with AM rims.

    Mike Prilliman

    Helpful (6)

  • 3/5

    March 11, 2010

    Harder than it looks

    They look great. My mechanic said they took a lot of work to install. One of them ended up rubbing every time I turned my wheel... so it has a long white gouge in it now.


    Helpful (5)

  • 3/5

    August 21, 2009


    Looks great when installed! Took a while for them to fit just right though. Have 18in wheels and had to almost bend the end of the covers to fit. Hopefully they will stay on!


    Helpful (5)

  • 1/5

    Installation Time: Full Day

    April 06, 2013

    Look ok, but fit and Installation are less than ideal for the money

    Basically for $200 you get semi custom fit pieces of prepainted aluminum with clips. You need to bend the covers and file the clips to make sure they don't rub on the rotors or interfere with the caliper operation. Installation problems with the rears was bad and fronts was average. Once on the look decent, but not great since they don't cover the entire cover. For $200 on an American made product, I would expect better.


    Year: 2007 Submodel: GT Merrick, NY

    Helpful (4)

  • 5/5

    August 06, 2010

    Big Improvement

    Really Improves the look ! Easy install . There are indentations on the face of each caliper where they weld the brackets on the back . But I'm really over joyed with new look of the wheels ! Stang-up !

    Eric C

    Helpful (3)

  • 5/5

    July 03, 2010

    Black Caliper covers

    Easy to install I needed the spacers they look great sets the wheel off


    Helpful (3)

  • 5/5

    Installation Time: Afternoon

    May 09, 2016

    Solid Addition, IF Proper Wheels Are Bought

    Like others have said, be exceedingly careful when installing with stock wheels, my 2006 4.0 required spacers. However that was short lived, for I right away got my hands on some CS Black with Machine Accent wheels, which provided all the clearance needed. Even though the new wheels are only 18x9s, these caliper covers fit perfectly and offered plenty of space even after removing the spacers. That being said, if you have your heart set on these caliper covers, it's best to have aftermarket wheels that offer more clearance than your stock variants.


    Year: 2006 Submodel: Other

    Helpful (2)

  • 5/5

    Installation Time: Afternoon

    January 15, 2013

    Great Product

    Very nice product! I have had the caliper covers installed for about a year and not a single issue. No rattles etc. These really look nice. Note that a medium thread locker was used during installation.


    Year: 2008 Submodel: GT

    Helpful (2)

  • 5/5

    September 29, 2009

    Mustang Caliper Covers

    I have a 2010 Mustang GT with 18" stock wheels. Very easy to install. Had not problem with clearance. Looks even better than I imagined.


    Year: 2010 Submodel: GT

    Helpful (2)

  • 4/5

    February 12, 2009


    Easy to instal, Look great. Just make sure you have enough clearance from your rims, I had to use 1/8th spacers.


    Helpful (2)

  • 5/5

    December 23, 2008

    MGP Caliper Covers

    I was tired of painting my calipers and the MGP Caliper Covers are a quick and easy way of dressing up my wheels and reducing brake dust.


    Helpful (2)

  • 2/5

    Installation Time: Full Day

    January 19, 2017

    sqeeky, pain to get adjusted

    install was very simply and straight forward, Problem arises when you drive the car. Rear brackets squeak like crazy. I took rear wheels off 10 times adjusting each time. Finally had to grind bracket down out outer side and finally after a day of taking wheels of and on and adjusting and grinding. finally got rear to stop squeaking. a real pain in the Butt. they do look good but not worth the price


    Year: 2007 Submodel: GT

    Helpful (1)

  • 1/5

    September 06, 2016

    MGP brake caliber covers

    In my opinion this product is Sub-standard at best , two hundred bucks down the drain then another fifty bucks down the drain for the wheel spacers at that point I just gave up on replacing the stock studs in the hub because of them being too short for the recommended spacer, not going to install the covers….. to bad they would have looked nice but way too much hassle. First the clips to hold the covers in place are a joke, very flimsy with a (it a kind of fits thing going on) first you FITTLE with the flimsy clips to kind of fit and fasten the covers on the calipers then install the wheel back on the hub and immediately find out that there is not enough clearance between the rim and the covers, you read the fine print on the instructions and OH….OH…OH guess what, you need (wheeeeeeel spacers, YA…) HUM….. Well then you buy the wheel spacers witch for the price of the cover kit should have been included with the covers…. Only to find out that the spacer they recommend is not self-centering and can and will through the wheel out of balance, and YA you need to remove the stock hub studs and install new longer studs our will risk stripping the lug nuts out. OH and the covers LOOK to be die stamped aluminum not CNC milled as suggested the only CNC work I can possibly see is the engraving on the covers. Spare yourself the mess and hassle and buy caliper paint then clean and paint the calipers……


    Year: 2005 Submodel: GT

    Helpful (1)

  • 5/5

    April 19, 2009

    Big Brake Look at a Small Price

    Just finished installing the 4-piece set behind factory 18\" chromed wheels. REALLY makes you think the wheels may scrape the caliper covers (especially the back wheel ones!), but they do not. When done, you have the big brake look at a fraction of the cost. Looks great!


    Helpful (1)

Related Mustang Categories