- (1) Main Cap Girdle
- (10) Bolts
- (10) Washers
Fitment: 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details
CA Residents: Warning: California's Proposition 65
Installation Time: (approx) a Day
Difficulty Level:Mechanical expertise or professional installation required.
Fits 5.0L V8's Only
Will this Main Cap Girdle it with the stock oil pan or not? The two previous Q/A are contradictary. One answer say that it will fit a stock oil pan the other says that it will not. I have a 1995 with a stock oil pan that I'm building.
The Canton Main Cap Girdle is machined to clear at least a 3.40 stroke and will not work with stock pans.
Do I need to buy a different oil pan or will this work with my stock oil pan. I'm installing a procharger p1sc and want to buy a stud girdle just want to make sure it will bolt up to my bottom end with out much modifications and will it work with a stock pan or do I need to purchase a new one.
So long as that is the original pan it will fit, Ford later in 92 93 used a Thunderbird shallow pan and it wont clear, If I was adding a pro-charger p1sc I would replace the pan with a 7 quart pan to try to keep the oil cooler,, And no an oil cooler is not enough with 5 quarts. Just my opinion but I run 1500hp engines
Will this main cap girdle work with a stock oil pan.
The Canton Main Cap Girdle does not work with the stock oil pan. Also, it is recommended to install the Canton Windage Tray For Main Cap Girdle (86-95 5.0L), item # 14706, (http://www.americanmuscle.com/canton-windage-tray-20960.html) along with the Girdle because it is designed to bolt directly into the pre-drilled and tapped holes on the support.
September 06, 2018
This item looks real nice and came with the longer bolts.
June 25, 2018
Canton main girdle
Excellent fit works great. Clears rotating assembly on stroker motor with no issues.
December 20, 2013
great product and price
love it i would recomend it to any one building 302 with 400 are more hp.