Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $15,000!! Enter Now

Modern Billet Clutch Pedal Extension (94-20 w/ Manual Transmission)

Item 525516
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Market Price $46.99 You Save 15% ($7.00)
Our Price


FREE Shipping on orders over $49

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

      Review & Installation Video

      Hey guys, Stephanie with, and I'm checking out this Clutch Pedal Extension for 1994 to 2015 manual Mustangs. Comfort while driving is essential, and I'm sure that many of us have tried to drive a manual Mustang in an uncomfortable position because we have to move the seat so far up to get a good feel for the engagement and disengagement of the clutch. This pedal extension moves the clutch pedal up one and a half inch closer to the driver to give you a more comfortable driving position without altering the performance of your clutch.You can see right away that the pedal extension is low key and hardly detectable, and you can put your pedal cover right over it. It's made from a high impact ABS plastic, and it's designed and manufactured right here in the USA. The ABS plastic design means that it's lightweight, and it has a superior durability so it'll last a lifetime, whether your car is a track car or a daily driver. Another plus here is the very simple installation of this pedal extension. The pedal extension comes complete with the two stainless steel screws that you'll need, and getting this installed should take you about 15 minutes. So if you're looking for a fast and easy way to improve your comfort while driving, then you should check out this clutch pedal extension for your '94 to 2015 manual transmission Mustang available here at

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation


      • Improves Driver Ergonomics
      • Moves Pedal 40mm (1.5") Closer to Driver
      • Does Not Alter Clutch Performance
      • High Impact ABS Plastic Construction
      • Easilly Installs in Just Minutes
      • Designed and Manufactured in the USA
      • Fits All 1994-2020 Manual Equipped Mustangs


      Improves Ergonomics. Improve the driving ergonomics of your manual Mustang with a Clutch Pedal Extension for a more comfortable seating position. This Pedal Extension moves the clutch pedal 40mm (1.5") closer to driver so that you don't have to sit so far forward to fully engage/disengage your Mustangs clutch. This extension will not affect your clutch's performance; it is only designed to improve driver comfort.

      Made in the USA. Proudly manufactured in the USA from automotive grade acrylonitrile butadiene styrene (ABS) plastic material for its light-weight and superior durability, this Clutch Pedal Extension will last a lifetime.

      Application. This Clutch Pedal Extension is designed to fit all 1994 to 2020 Mustangs equipped with a manual transmission, including the V6, GT, Bullitt, Mach 1, SVT Cobra, BOSS, Shelby GT500 and EcoBoost models.

      Please Note. A clutch pedal pad is not included with the Clutch Pedal Extension. You will use your stock or an aftermarket clutch pedal pad.

      Modern Billet

      Fitment: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details

      MPN# 525516

      CA Residents: WARNING: Cancer and Reproductive Harm -


      Customer Reviews (100+)

      Write a Review

      Ratings Summary

      4.8 out of 5 overall rating from 100+ customers

      • February 12, 2020

        5 1998 GT - 2vgttom

        Not billet clutch pedal extension

        Although the clutch pedal extension is not Billet like advertise, It works very well. It is a very heavy duty plastic. Do not let the title fool you. But once again it works great

        Helpful (0)
      • February 06, 2020

        3 2017 GT - Skinny

        Fell short

        I am not the tallest person by no means so in the category of height I guess I fell short and the quality of this product in my opinion also fell short. Although it will do what it is designed to do the quality is not there. Produced with plastic and top hole threaded section was lose . Had to improvise to be able to tighten the top screw. We will see if it holds up.

        Helpful (2)
      • February 06, 2020

        4 2016 GT - Twowheeler

        Misleading name

        Product works but I didn't read the full information when I ordered it. I saw Billet in the name and expected a metal adapter instead of a plastic one. Not wanting to wait I installed it and gave it a try and it is working well for me.

        Helpful (1)
      • January 30, 2020

        5 2013 V6 - Jburns


        It did what it was suppose to do. It does make a differance

        Helpful (0)
      • January 27, 2020

        5 2014 GT - CC56

        Helpful (0)
      • January 09, 2020

        5 2013 GT - KoreanMustang

        Very hard...

        The installation took a while. However, the cold weather made the rubber hard to install. The car heater was turned on to the highest level and waited for the rubber to soften before the installation. The seat position has also improved after installation.

        Helpful (0)
      • January 02, 2020

        5 1997 Cobra - Dmurphy

        Great aid if you have a bad knee

        I've suffered from 2 bad knees for years but I really love driving a clutch long as my left leg is not fully extended my pain is tolerable....this extension is a life saver,we go to 7-8 cruises a year during the summer and some notes it takes 30-45 minutes to get from one end of the cruise area to the other so this has made a substantial difference in my driving at these events. Thanks for a great product !

        Helpful (0)
      • December 31, 2019

        5 2005 GT - Fullmer

        Clutch peddle

        Works great , had to put different nut and bolt through one hole. Set nut was spinning around. Over all was great and helps with clutch throw not as far my leg.

        Helpful (1)
      • December 17, 2019

        5 2005 GT - Raehm

        An absolute must

        This was the first "mod" I purchased. Can't imagine driving without it!

        Helpful (0)
      • December 08, 2019

        4 1997 GT - GeraldB


        Dont have to have my seat all the way forward now, much nicer..

        Helpful (1)

      Questions & Answers (8 answers)

      5 Top Rated Questions

      maybe you could help I got my pedal cover in place on the pedal extension but it doesn't seem to want to slip over my 2003 mach1 clutch pedal it seems to small tried it by just slipping it on by itself with the same result maybe you could tell me what I am doing wrong thanks

      • You can trying pulling the pieces of the extension to the side in over it slip the extension over the pedal. Below is a link to a detailed installation guide that will show you exactly how to install this pedal extension.

      Helpful (4)

      Will this work with the Bullitt pedal setup? I would like to keep the same look of the bullitt pedals

      • If you are referring to the Bullitt style pedal pads that fit all Mustangs, the answer is yes. I have GT500 style pedal pads which are similiar and it fit fine. The trick is to heat up the pad in hot water and slide it on from the bottom. The alternate would be to put the pad on the extension first and "clam shell" it on.

      Helpful (3)

      Will the stock GT500 pedal cover fit on the extension?

      • The instructions say it fits all 1994 and up Mustangs with manual transmission. My Mustang has the rubber and stainless steel pedal covers, and by heating the cover with hot water I was able to put it on. There is also alternate instructions that have you put the pedal cover on first, then clam shell the extension on to the clutch pedal.

      Helpful (1)

      will these fit on a 1993 mustang lx?

      • No, this will not fit 1993 models.

      Helpful (0)

      I've been using my clutch pedal for quite some time now which is excellent in shifting gears, however lately i noticed that it was a bit wiggling and loose. I later found out that the screws were missing. are there a replacement screws available for this?

      • Unfroutunettly, we do not carry the screws outside of this product for sale at this point in time.

      Helpful (0)
      Post Your Question
      3 More Questions
      Will this work with my Roush billet pedal covers. They are installed by drilling through the metal pedal and placing screw through the holes and securing on back with a threaded nut. It is the older style Roush covers for my 2007 Roush Mustang. 1 answer
      I have a 2013 Boss 302 and I cant seam to get the pedal cover out. It feels like is glued in, i don't want to force it to much and break something. 1 answer
      I'm 6'-1" tall. Anyone out there with a similar height use the clutch pedal extension? 1 answer

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Clutch Pedal Extension
      • (2) Stainless Steel Screws

      Will It Fit My Mustang

      • Boss 302 - 12, 13
      • Bullitt - 01, 08, 09, 19, 20
      • Cobra - 94, 95, 96, 97, 98, 99, 00, 01, 03, 04
      • Cobra R - 95, 00
      • EcoBoost - 15, 16, 17, 18, 19, 20
      • GT - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
      • GT350 - 15, 16, 17, 18, 19, 20
      • GT350R - 15, 16, 17, 18, 19, 20
      • GT500 - 07, 08, 09, 10, 11, 12, 13, 14
      • Mach 1 - 03, 04
      • V6 - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17

          Related Mustang Categories