Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $15,000!! Enter Now

Modern Billet GT500 Style Pedal Covers (05-14 w/ Manual Transmission)

Item 11049
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $57.99 You Save 14% ($8.00)
Our Price

$49.99

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

      Review & Installation Video

      Hey everyone, I’m Justin with AmericanMuscle.com. And I’m checking out these GT500 Style Pedal Covers for our automatic and manual ’05 to ’09 Mustangs. The stock pedal covers in your S197 Mustang were certainly not designed with style in mind. Their ugly, boring, and chances are have probably seen better days. That’s where these covers really shine, literally. These covers give your interior an instant boost of class and style. These pedals were designed to the original factory specifications using the same high quality materials found in the newer GT500 Mustangs. Depending on your car, you’ll either receive the gas, brake, and dead pedal for you automatic guys. And for you manual cars your going to receive the gas, brake, clutch, and dead pedal. Now the install is very straight forward and should only take you fifteen to thirty minutes. Now a little install tip before you get started: it’s a great idea to let your brake and clutch pedal sit in hot or boiling water for a few minutes just to make the rubber a little more pliable. Now your first step is to remove your rubber factory pedal covers and get them out of the way. Install your brake and clutch pedal first, and then move over to your accelerator. You’ll find that very easy thanks to the 3m tape located on the back of this piece. Once your done with that, go ahead and move over to your dead pedal where it bolts on to the factory location. Install couldn’t be easier. There is no question that these covers will be a dramatic improvement to your interior for a price that’s hard to beat. So if you want to enjoy a little bit of that awesome GT500 attitude on your ride, be sure to check out these pedal covers today.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • GT500 Styling
      • Race Inspired
      • Dead Pedal Included
      • Fits 2005-2014 Manual Mustangs

      Description

      Race Inspired Styling. Now you can ditch those ugly stock rubber pedal covers and replace them with a set of GT500 styled pedals from AmericanMuscle for a race inspired custom interior.

      OEM Quality. Made from high quality OEM materials to the original factory specifications these, Mustang Pedal Covers look and feel just like the ones that were originally only available in the Shelby GT500 Mustangs.

      Installation.
      This set of four (4) GT500 Style Pedal Covers can be easily and quickly installed. The Brake and Clutch Pedal Covers features a simple slip-on installation, the Accelerator Cover is adhered via two way automotive bonding tape and the included Dead Pedal mounts easily via a factory bolt.

      Application.
      This set of GT500 Style Pedals Covers is designed to fit 2005 to 2014 Mustangs with a manual transmission, including the V6, GT, Bullitt and BOSS 302 models. Will not fit the Premium 2010-2014 Mustangs.

      Modern Billet

      Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

      MPN# 11049

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      4.1

      Customer Reviews (100+)

      Write a Review

      Ratings Summary

      4.1 out of 5 overall rating from 100+ customers

      Installation Time: Less than 1 Hour

      Installation Cost: 0-$100





      • January 20, 2020

        4 2007 GT - Gucci Installation Time: Less than 1 Hour

        Gt500 style pedal

        Nice look Definitely need to boil brake and Clutch pedal in hot water 10-12 minutes for a Easier in a better install

        Helpful (0)
      • June 12, 2019

        1 2013 GT - Ryan1

        Terrible fitment.

        I did everything. Boil, hair dry, heat gun, these refused to go on. Ended breaking both the clutch and gas pedal rubber at the bottom during install. Plus the 3M adhesive for the driver pedal is complete garbage. Didn't even last 30 minutes, plus the gas pedal did not fit properly. Wasted $50.

        Helpful (4)
      • May 09, 2019

        5 2007 GT - LoriB Installation Time: Less than 1 Hour

        Pedals

        Was a little difficult working in small area. Need to place pedal in hot water for 10 to 15 minutes to soften the rubber up to muscle them on. They look great, an improvement to they look.

        Helpful (1)
      • May 05, 2019

        5 2014 GT - GTfan Installation Time: Less than 1 Hour

        '14 Mustang pedal pads

        Reading the reviews first helped a lot. Make sure to heat the brake and clutch pad first (I let them sit in the sun for about an hour) and I used silicone lubricant on the pads and pedals. It still took about 15-20 minutes wrestling mightily with each pad. Used a stubby screwdriver to finish it once it was about 75 on. Well, stomping on it with my boots helped too! Accelerator is just an overlay, make sure to get some extra 3M mounting tape as the supplied tape is not thick enough

        Helpful (0)
      • May 04, 2019

        5 2014 V6 - GaryP

        GT Style pedals

        These pedals change the look of the car very easy to install

        Helpful (0)
      • March 24, 2019

        4 2005 GT - ParkerE Installation Time: Less than 1 Hour

        Pain to install, but worth it

        These were a pain in the you-know-what to install but they look awesome and absolutely would recommend. Rated 4 stars because gas pedal comes with single piece of low-quality 3M sticky tape and almost wouldn't stay stuck on. When. putting on the clutch and gas pedal I would recommend to place them in boiling water, makes the rubber more pliable and easier to install. Once you get everything installed they look awesome and are definitely worth it.

        Helpful (0)
      • February 23, 2019

        4 2008 GT - RobertK Installation Time: Less than 1 Hour

        Nice

        Pedals look great. Little difficult stretching the rubber on brake/clutch pedals but worked it out. Did not install the dead pedal yet. Requires a bit of refab to fit professionally.

        Helpful (1)
      • February 02, 2019

        2 2005 GT - d Installation Time: Less than 1 Hour

        a little disapointing

        gas pedal tapes on over old one. Two sided tape provided of low quality. dead pedal doesn't fit well.

        Helpful (2)
      • January 22, 2019

        5 2011 V6 - RichardM Installation Time: Afternoon

        pedal covers

        Instructions with pedals are not complete. Dead pedal was a bit more work to get it done right. Boil the clutch and brake separately, take your time. Look good after. Adhesive on gas pedal is useless, I used an thicker 3M tape to get a permanent install.

        Helpful (1)
      • January 17, 2019

        5 2013 GT - AdamA Installation Time: Less than 1 Hour

        Looks great

        The double sided tape included with the gas pedal didn’t stick on the first try even after cleaning the pedal surface with denatured alcohol. Pedals where bit of a pain to put on but a short screw driver and some silicone tire spray to lube them I finally pried them on. They look great once installed

        Helpful (1)

      Questions & Answers (9 answers)

      5 Top Rated Questions

      Will these pedals fit the 2017 v-6 manual?

      My 2010 GT with the premium package has aluminum pedal covers similar to these (which are wearing out, and need to be replaced). Do you know if these are the same pedal covers as the ones optional on the GT premiums for 2010?

      • While these would be similar to the OEM pedal covers for the GT Premiums, these would not be the same pedal covers that are factory on the GT premium package.

      Helpful (0)

      I've had this item for a little over a year. The rubber part that was hold on the metal top of the clutch has worn off and has allowed the metal cover to call. Do you sell these items independently or have any suggestions on what I can do for this item?

      • We do not currently sell the metal rubber part on the top of the clutch separately. Please reach out directly to our customer service department as we would be glad to look into this with you. Feel free to reach us by calling 1-877-887-1105 or by chatting in.

      Helpful (0)

      Will these pedal covers work the the clutch pedal extension?

      • The GT500 Style Pedal Covers is meant to replace the cover you have now. Because the stock cover goes over the pedal extension the size should be the same which will fit.

      Helpful (0)

      How do you install the gas pedal do I need to remove the old one if yes how do you remove it

      • the gas pedal cover will simply stick on by a two way automotive bonding tape

      Helpful (0)
      Post Your Question
      4 More Questions
      What is the warranty on these pedal covers? My clutch cover is already coming apart on the top. Lanny V. 1 answer
      How do you install the dead pedal? I received the kit yesterday, got the three pedals installed - easy and look great. The dead pedal, have no idea how to install. No instructions in the box. Thanks. 4 answers
      Dead pedal installation It's not clear to me where the dead pedal gets attached. Will it be obvious when I remove that interior panel near the clutch pedal? What type/size bolt? 3 answers
      The stock brake and clutch pedals are too small for me. Are these somewhat larger. I realize they have to be some larger to slip over stock pedals. 4 answers

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Clutch Pedal
      • (1) Brake Pedal
      • (1) Accelerator Pedal
      • (1) Dead Pedal

      Hardware included:

      • 3M Tape

      Will It Fit My Mustang

      • Boss 302 - 12, 13
      • Bullitt - 08, 09
      • GT - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
      • V6 - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14

      Fits Manual Mustangs only. Does NOT fit Premium versions of 2010-2014 Mustangs

          Related Mustang Categories