Customer Reviews (17) Write a Review

Overall Rating 5

out of 5 stars

• 5/5

  April 14, 2019

  Like New

  There is a lot to changing this but it was worth it, totally fixed the door sag. The inner back bushings wore out of the hole in the old hinge, no other way to fix this other than to replace the unit.

  YellowStang

  Year: 2004 Submodel: GT

  Helpful (0) Thanks for your input!
• 5/5

  January 17, 2019

  Perfect replacement for The saggy door

  I recently got a 02 mustang and the driver door was a little saggy so I purchased this and it solved the problem , was little hard to get the door aligned just right but once I did it's works perfect

  JesseH

  Year: 2002 Submodel: V6

  Helpful (2) Thanks for your input!
• 5/5

  January 11, 2019

  Awesome!

  Came early which is a plus! Best website to order your parts! Got my door to shut smoothly (after a wreck). Awesome!! :)

  Michael

  Year: 2004 Submodel: V6

  Helpful (2) Thanks for your input!

  • Bang for your Buck 4

    4
• 5/5

  November 21, 2018

  New door Hindge

  Easy install, perfect fit. Took less than two hours to complete. The door is operating like a new door. Very happy.

  Jerry1725

  Year: 1999 Submodel: V6

  Helpful (7) Thanks for your input!
• 5/5

  November 08, 2018

  good product

  nice it fixed the problem door shuts great now it does not drop when you open it and closes nice no more having to slam the door just pull and its closed just like a new car,highly recommend it for door problems

  dullblade12

  Year: 2001 Submodel: V6

  Helpful (6) Thanks for your input!
• 5/5

  October 13, 2018

  Stops the squeak!

  Worth the price. Hint, you don't have to fully remove the fender. Rest door on stool when removing. Assemble with door shut. Worked first time! Squeak solved.

  Devin

  Year: 2003 Submodel: GT

  Helpful (6) Thanks for your input!
• 5/5

  September 13, 2018

  In love again!

  What can't be good about new hinges? Can't think of anything

  firstl

  Year: 2001 Submodel: V6

  Helpful (6) Thanks for your input!
• 5/5

  June 28, 2018

  The door is working i

  I just change this piece to my driver door and now is ok

  Davidmax

  Year: 1996 Submodel: GT

  Helpful (9) Thanks for your input!
• 5/5

  January 16, 2018

  door hinges

  they fit perfectly but installing them sucks my door opens and closes easier and dont sag

  98mustangt

  Year: 1999 Submodel: GT

  Helpful (9) Thanks for your input!
• 5/5

  November 23, 2017

  Pain in the butt to install, but great replacement

  My door hinges were completely busted, I replaced both sides. These feel great and it feels like I have brand new doors. I primed and painted both to match my car, here's a good heads up for you if you choose to buy this. 1. Prepare a WHOLE day to change just one. It's really tricky doing this the first time (probably a few hours after first install). 2. You need to take the fender out/most of it out. 3. Getting everything to line up correctly after swapping it out is kind of difficult. 4. If you only choose to hold the fender out instead of taking it out (i.e. not taking out bottom bolts due to corrosion like mine), you're very limited for space. 5. Make sure you do every in the EXACT opposite order you took it apart. 6. Re-aligning the door/hinges/fender may or will require 2 people and will be time consuming 7. Get some pads or cloth to watch for the fender or door scratching other parts of the car. (11mm, 8mm, 13mm, Philips screws, and Christmas tree pins required to take out) Good luck :)

  Jonathan

  Year: 2003 Submodel: V6

  Helpful (10) Thanks for your input!
• 5/5

  June 20, 2017

  Door Hinge

  Very good product. This product fit well with with no issues.

  MikeJ

  Year: 2000 Submodel: V6

  Helpful (9) Thanks for your input!
• 5/5

  March 24, 2017

  Bottom hinge

  Very strong part just like the factory one i painted it white to match my car installed it and it works beautifuly should have replaced it sooner so happy my doors works great got it i believe in a couple days thanks again AM.

  T

  Year: 2000 Submodel: V6

  Helpful (9) Thanks for your input!
• 5/5

  September 05, 2016

  I love it!!!

  I love the part it fit perfectly to the door. And it arrived on time it said it was.

  John

  Year: 2000 Submodel: V6

  Helpful (10) Thanks for your input!
• 5/5

  August 08, 2016

  Saggy door? This!

  Replaced my top and bottom hinge to fix my saggy door issue. These are the way to go, don't waste your time with the "Help!" aisle at AZ. Those pin kits will only cause issues later. A little time consuming to do, but it's nice to have your door close as it should and not squeak like an old pickup truck.

  warewolf39

  Year: 2000 Submodel: GT

  Helpful (9) Thanks for your input!
• 5/5

  July 07, 2016

  Fixed!

  I replaced my lower door hinge on my driver side door and it fixed my saggy/falling door problem right away! Before I was not able to close my door without lifting it or lower my window! This easiest way to do this is by removing your front fender first. The rest is easy!

  Silverstang

  Year: 2002 Submodel: GT

  Helpful (8) Thanks for your input!
• 5/5

  June 23, 2016

  Pain to install but works great!

  I watched a YouTube video on how to install this. One guy was able to do it without removing the side panel, I was not... So the whole left side had to come off. Ended up taking my a few hours because things kept breaking, screws got striped etc... Typical when I work on a car, but it should only take an hour or two at most if things run smoothly. My door stays open when I'm on a hill which is awesome! It does come unpainted so if you want it to match anything other than the silver color (which is fine for my silver mustang) then you will need some paint. Tips: Use extensions from both sides of the door once you get the quarter panel off. There is one bolt on the inside on the floor. I had to remove a wiring harness to get to. Loosen the upper bolts from the hinge to the car body to pull the door out just far enough so that the lower hinge slips out when all of it's bolts are removed. I could not figure out how to get the hinge out once all of the bolts were taken out, and it took me an hour to figure out that I needed to loosen the upper bolts so that the door could move just a tad bit further. Hopefully this tip will keep you from spinning your wheels. Also, it doesn't hurt to have a good rolling floor jack with some towels on it to support the door if you need to.

  Gezus

  Year: 2004 Submodel: GT

  Helpful (9) Thanks for your input!
• 5/5

  March 17, 2016

  Super!!

  Fit very well and easy to install. Good stuff. Fast shipping.

  Chanther

  Year: 2000 Submodel: GT

  Helpful (7) Thanks for your input!