Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter daily!

Polished Valve Covers (79-95 V8)

AmericanMuscle no longer carries the Polished Valve Covers (79-95 V8). Please check out Ford Mustang Valve Covers for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Ford Racing Style
  • Lightweight Die-Cast Aluminum
  • Bright Polished Finish with Black Lettering
  • 3-3/4" Tall
  • Sold as a Set of Two
  • Fits 289, 302, and 351W V8 Mustangs
Ford Racing Style. Now you can dress up your pony's engine compartment for an impressive show winning appearance with a set of Ford Racing Polished Aluminum Valve Covers.

Quality Construction. Die-cast from lightweight aluminum these baffled Ford Racing Valve Covers are completed with a bright polished finish and feature the modern Ford Racing logo in black for impressive styling.

Fitment. These Ford Racing Aluminum Valve Covers are designed to fit Ford Mustangs equipped with a 289, 302, or 351W V8. So now you can go from boring stock to classic muscle for a show winning look.

Technical Note. These Ford Racing Aluminum Valve Covers are "Tall" and will clear roller rockers and stud girdles, but are not for use with electronic fuel injection (EFI) motors.

Fitment: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (2) Valve Covers
  • (2) Plates
  • (8) Screws
Installation Info
Tech Specs
Will it fit my Mustang?
  • Cobra - 93, 94, 95
  • Cobra R - 93, 95
  • GT - 87, 88, 89, 90, 91, 92, 93
  • LX - 87, 88, 89, 90, 91, 92, 93
  • Other - 79, 80, 81, 82, 83, 84, 85, 86

Valve Covers are NOT designed for use with electronic fuel injection (EFI) motors.

You Might Also Like

Customer Photos (6) Submit Your Photo

View All 6 Photos

More Products You Might Like

Questions & Answers (7)

5 Top Rated Questions

Will these valve covers fit on 98 mustang NPI motor with PI swap heads??

  • Hi, No these valve covers are designed to only fit Mustangs with a 289, 302, or 351W

Helpful (1)

Will these work on a stock 1990 5.0 LX Mustang? Will I need intake spacers? If so, how thick should the spacers be as I need to worry about hood clearance and clearance from the bottom?

Hello, would I be able to install these covers on a 95 Cobra without removing the stock upper manifold.

  • The Ford Polished Valve Covers will fit the 1995 Cobra Mustang without needing to remove the stock upper intake manifold.

Helpful (0)

I just installed these Vavle Covers on my motor they look great and would like to know what filler cap I should use as I am using a PCV in the right cover or should I use 2nd PCV. These are on1984, 302 engine that is in a 1940 pickup. Thanks Jerry

  • These valve covers do not have a specific spot to install a filler cap. You would be able to add oil in either of the holes in the top of these valve covers, you would just have to remove the PCV valve or oil breather and add oil.

Helpful (0)

Hi I have a 1995 mustang cobra with a carburetor. Would these valve covers work for me ?

  • These Ford Polished Valve Covers are not designed to work with EFI motors, so this would actually be a great product for a carbureted motor.

Helpful (0)
Post Your Question
2 More Questions
What all is needed to install these on a 95 GT? 1 answer
how do you fill the oil? through the breather hole? also would it fit my 302 without spacers? 1 answer

Recommended For You

Customer Reviews (16) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 4.733333 4.7
  • Appearance 5 5
  • Bang For Your Buck 4.666667 4.7



  • 5/5

    Installation Time: Less than 1 Hour

    March 05, 2019

    Classic Ford valve covers

    Using these on a carbureted 94 Mustang, nice and tall to cover roller rockers on Trick flow heads. Look fantastic and nice thickness for gasket sealing.

    JeffO

    Year: 1994 Submodel: GT

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    April 23, 2018

    Polished valve covers

    Great quality love the outcome, before I purchased them I was really indecisive because I've always loved black valve covers. But love the way they look on my setup

    AaronJ

    Year: 1985 Submodel: Other

    Helpful (6)

  • 5/5

    Installation Time: Less than 1 Hour

    February 06, 2018

    Looks awesome!

    Just enough shine under the hood without being over the top! Good fit but will need intake spacer for efi.

    TimR

    Year: 1991 Submodel: GT

    Helpful (7)

  • 5/5

    Installation Time: Less than 1 Hour

    April 04, 2017

    Ford Racing top Quality parts

    I bought these Valve covers to up grade the bling on My 92 Fox.... i looks good and very easy to install... i would recommend you Use The Rubber gaskets.....from ford.Thanks A.M

    FoxyFLMach1

    Year: 1992 Submodel: LX

    Helpful (9)

  • 5/5

    Installation Time: Less than 1 Hour

    December 11, 2016

    valve covers

    They look great on my new 331 stoker engine. They will get the job done. It makes the engine look like a beast.

    toby

    Year: 1995 Submodel: GT

    Helpful (9)

  • 5/5

    September 21, 2016

    Great product!

    These valve covers are great for dressing up your engine! They look amazing!

    ecamp93

    Year: 1993 Submodel: Other

    Helpful (8)

  • 5/5

    Installation Time: Less than 1 Hour

    December 28, 2015

    easy looks nice

    Great product looks nice easy to install adds a kick under the hood I would recommend this product to anyone with a 5.0 302 works great

    Dan

    Year: 1994 Submodel: Cobra New Holstein wi

    Helpful (7)

  • 5/5

    Installation Time: Afternoon

    July 19, 2014

    Ford racing vavle covers

    They are amazing vavle covers. Have to do come clearance stuff for them to fit on the EFI 5.0 like a 1" spacer and a new hood but the look it gives off is just amazing.

    Hamel93

    Year: 1995 Submodel: Boss

    Helpful (9)

  • 5/5

    Installation Time: Less than 1 Hour

    March 21, 2014

    Really tall

    This will work with an EFI motor with modifications. They are very well made and well worth the money if you have a carbed motor.

    EdwardN

    Year: 1995 Submodel: GT Loganville, GA 30052, USA

    Helpful (8)

  • 5/5

    Installation Time: Less than 1 Hour

    January 27, 2014

    looks great

    Great product like the ford racing products helps give the stang an original factory built look.

    smooth50

    Year: 1988 Submodel: Other Kentucky, USA

    Helpful (9)

  • 5/5

    Installation Time: Afternoon

    October 18, 2013

    great look

    right out of the box these are amazing. fit exactly like stock. and a heck of a difference in the appearance under the hood.

    AlexAM

    Year: 1986 Submodel: GT Aston, PA

    Helpful (8)

  • 5/5

    Installation Time: Afternoon

    July 01, 2013

    This product gives engine great look!

    The product gave my engine a great look. Easy to install right out of the box. Perfect fitment!

    dresegu

    Year: 1996 Submodel: GT Chicago, IL, USA

    Helpful (9)

  • 5/5

    Installation Time: Afternoon

    December 22, 2012

    A engine bay must!

    I loved the styling of these ford racing valve covers and added a great performance look to my engine bay

    Willyp39644

    Year: 1986 Submodel: GT Canton, GA, USA

    Helpful (9)

  • 5/5

    Installation Time: Less than 1 Hour

    July 28, 2012

    Amazing valve covers

    not only do they work amazing.. they look great under the hood and give the engine a nice finish.

    solo

    Year: 1995 Submodel: GT Langley, BC

    Helpful (10)

  • 4/5

    April 27, 2012

    Great looks to the 302

    Rebuilt top end do dicided to continue the new look of my top end. Still have to order breathers ... But very pleased with look.

    rickrv5

    Year: 1992 Submodel: GT Indiana

    Helpful (9)

  • 4/5

    Installation Time: Less than 1 Hour

    December 07, 2011

    this product makes my stang shine

    these valve cover added the final touches to my 347 stroker making it glisten with the perfect fit. They were easy to install with no hassle and no extra hardware needed. would definitly recommend them to a mustang owner

    hugehitter

    Year: 1989 Submodel: GT dallas,tx

    Helpful (9)

Related Mustang Categories