(approx) 1 Hour
Simple installation for anyone.
- Basic Mustang Vinyl Instructions
Open Box from $27.86
Hey I'm Justin with AmericanMuscle.com and I'm here with our American Muscle Graphics Dual Hood Stripe kit fitting all 2010 to 2012 Mustangs, available in your choice of either white, black, silver, and matte black. This kit is a great alternative to the full car look of a set of GT500 or Lemans style stripes, yet still features that same heritage vibe. As you can see, the retro design features these two prominent stripes, which are outlined by this small pin striping, which really does a great job of enhancing the power bulge on your factory hood. All of our American Muscle Graphics are designed and produced right here in-house using only the highest quality premium cast vinyl, which is by far one of the most durable vinyl�s available on the market today. In addition, our experienced vinyl team then tests and tweaks each design on our very own fleet of cars here in the shop, ensuring a perfect fit for your ride. Another nice thing about these dual hood stripes is that they are extremely easy to install using a spray bottle filled with a soap and water mixture and the included squeegee. In fact, even if you take your time and follow those detailed instructions, you should have no problem getting this one knocked out in about an hour. So if you dig the look of Lemans or GT500 stripes for your ride, but only in small doses, then this dual hood stripe kit from American Muscle Graphics would be the perfect option for you.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2010 2011 2012 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 25, 2019
Great Quality, Excellent Look
After having to throw out hood graphics ordered from eBay due to not being able to fit the hood bulge curve, I finally ordered these stripes at 2x the eBay cost. They are worth it but they do require professional application as even the body shop that I took it to had difficulty getting it right. The shop restores muscle cars and this wasn't their first rodeo applying graphics; it took them 1 1/2 hours labor to get them right.Helpful (0)
August 14, 2018
Big change for a small price
These stripes made a big difference in the looks of my 2011 race red 6 cylinder convertible. They were not hard to install, but you must be careful to get them where you want them before you squegie the water out. Once you do that they are hard to reposition. I used small bits of masking tape to help me get the outside edge where I wanted it and measured the space between the stripes to keep it even before finishing up the installation. I have used stripes for my F150 from American Muscle from the same material and they have held up well, so these should too.Helpful (2)
July 13, 2018
When I originally received graphics I was going to return because I didn't think I could get them right to look good. I read reviews and everybody said take your time and follow directions. I took on the task and 2 hours later done. Came out really niceHelpful (3)
June 29, 2017
Easy to install
This was super easy to install. Make sure work area is clean, take you time, it will look great. I've had body shop folks ask who was the pro installer, came out that good.Helpful (5)
June 21, 2017
Awsome look, easy install
Really nice thick material followed durections using there install kit 2, hours we were done.Helpful (6)
June 18, 2017
Great 3m quality and appearance!! Nor I just wish you had a truck lid set !!Helpful (5)
January 18, 2017
Delivers as Promised
I personally had to trim off just a SMALL bit of the decal to get it to fit my hood, but otherwise the product looks exactly as you'd expect it to. No faults, no mis-matched sizes, and fairly easy installation. Extremely satisfied with the product!Helpful (6)
September 26, 2016
Nice quality, but poor fit
Bought this set to put on my 2010 mustang, but noticed that the front edge didn't match the lines of my stock hood all that well. Decided not to put them on and will try to return them.Helpful (7)
September 16, 2016
It goes on easy, and the product is exactly as advertised. Take a lot of care when you put them on; it's difficult getting the two stripes to line up. Just take your time and it will work out just fine..Helpful (7)
July 19, 2016
I was impressed with the quality of the material. It was relatively easy to apply.Helpful (6)
If you have a good scoop on your mustang. Will these stripes still fit?
You may just need to modify the stripes but I don't see why not, just keep in mind the decal wasn't exactly designed for Mustangs with a hood scoop so you may need to get a little creative.
Will it fit my V-6 2013 Mustang?
Hello, unfortunately the Matte Black Dual Hood Stripe (10-12 All) will not fit on the 2013 models
Can you run vinyl decals through a car wash? I recently purchased the vinyl hood stripes for my 2012 V6 and wondered if a car wash will hurt the decals after they have been hand washed the first time?
Once the decal is thoroughly dried I have not had any issues going through car wash. Hope this helps
(approx) 1 Hour
Simple installation for anyone.
What's in the Box