Simple installation for anyone.
- How to Install AmericanMuscle Wheels on Your Mustang
- Customer Submitted:
- How to Install Wheels on Your 1979-2013 Mustang
$489.99 (each)FREE Shipping
Popular Tire Setups for this Wheel
Hey Justin here with AmericanMuscle.com, and I’m checking out Forgestar’s F15 monoblock wheels, available in your choice of either matte black, gun metal, piano black, and silver, fitting all 2005 and newer Mustangs. At first glance you can see the design of the F14 Is more of a multispoke mesh wheel design, which has become extremely popular with the Mustang crowd as of late, which is course due to cars such as the RTR and the 2013 GT 500, both of which sport a variation of the mesh wheel design. These monoblock or one piece aluminum wheels go through an advanced process during production called rotary forging, this greatly improves the strength of the wheel, specifically the barrel, and generally reduces the weight of the wheel itself. The F14’s are offered in a wide variety of sizing options including an 18, 19, and 20 inch diameter, and in 9, 10, and 11 inch widths. Because there are a few different width options available, you can easily achieve that classic staggered look, by sticking a wider rear wheel and tire in the back versus the front, which in my opinion is the only way to roll. Chances are if you’re buying new wheels, you’re going to need new tires, we offer a pre built combinations, where we pair your F14’s up with some of the top tires on the market today, in sizes that are guaranteed to fit your car without rubbing, even if you’re lowered an inch or two. Of course you can also take advantage of our free mounting and balancing, free shipping and handling. Finally, all Forgestar wheels are backed by a lifetime structural warranty. When it does come time to install your new wheels just grab a floor jack and some basic hand tools. You’ll want to crack the lugs loose first on the stock wheels before getting the car in the air, after you do that, jack the car up and swap the 4 wheels and tires. Doesn’t get a lot easier than this, but since there is a little work involved, we’ll call it an hour from start to finish. So if you’re looking to take a break from the standard 5 spoke wheel and you want to go with a more modern multispoke mesh wheel design, then be sure to check out these quality lightweight aluminum wheels from Forgestar available right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Recommended Tire Size:
Note: Priced per wheel.
Note: Requires either tuner lug nuts or 6-spline style lug nuts
Note: The stock lug nuts (13/16”) prove to be too large when used in conjunction with these wheels. Please take a look at the Lug Nut Ordering Options above for some compatible options.
Fitment: 2005 2006 2007 2008 2009
Mounting & Balancing: AmericanMuscle offers professional mounting and balancing on all wheels and tires when purchased together on the same order. This will allow you to swap out your old wheels for your new set when they arrive.
What is TPMS? The Tire Pressure Monitoring System (TPMS for short) is a factory installed safety feature on all 2007 and newer Ford Mustangs that alerts you when your tire pressure drops to an unsafe limit.
How do I keep my TPMS feature? Aftermarket wheels do not come with TPMS sensors. However, if you select 'Add TPMS Sensor Kit' and your specific year range from the options listed above, we'll install the TPMS Sensors in your new wheels!
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
January 19, 2017
Yeah with the yeah
My ride like yeah. With a side of yeah. My ride looks like a whole lotta yeah. It was yeah before. But after this install it's yeah with the yeah.Helpful (8)
April 18, 2014
These wheels are great. I had them Hydro-Dipped with a carbon fiber film to match the center caps. If that is something you are considering; get the "Gun-Metal" color. My wheels are "Matte Black" and they had to be sprayed in gun-metal before the film could be applied, so that the Carbon Fiber print would show. It doesn't cost much more to have a base color applied before the Hydro-Dip, but it will probably save some time getting your wheels back and on your car.Helpful (10)
April 13, 2014
Great Wheels for the price
I ordered these for my 2011 GT500. These were packaged as expected, well protected and were shipped timely. I was disappointed to see that the stems and caps were not black- just know that if you order the tire pressure sensors that the stem and caps are metal colored, and don't look good on a flat black wheel. Additionally, after mounting I had a vibration, and had to take them to a local tire shop and check the balance. The right rear was way off. Otherwise I love the way these wheels look and I do recommend them!Helpful (13)
December 20, 2013
All around great product
Catches eyes left and right, you will otice a huge difference in your cars exterior apperance it almost looks like you have a entirely new car.Helpful (8)
May 18, 2013
Forge Star F14 are Neck Breakers
To put it plane and simple The best wheels for the money unless u want to spend 1k a rim for custom wheels. I wanted for the front nothing smaller then 19x9" Wide and Forge Star had it while other wheels came 8.5". For the back i wanted nothing less then 10" Wide and Forge Star had them but i ended up with 20x11" Wide and WOW.... Light weight, High Quality like a set of 5k wheel for less and. American Muscle is the best place to get them ....... Order Made 05/14/13 and had the wheels at my house 05/15/13 all for Free to New York. Thank You so much American Muscle !!!Helpful (8)
June 28, 2012
Forgestar F14 20's
I'd been going back and forth on the Forgestar F14's vs. another brand. Finally decided on the F14's and noticed American Muscle could now do them in 20". They shipped immediately and were to me in 3 days. Packaged perfectly with lots of padding and protection. Fit and finish is beautiful. My local tire people mounted up some Nitto Invo 275/35/20 and 315/35/20 as American Muscle could not provide these sizes for me. Balanced out great and ride really nice. Car now looks hunkered down like it should. Would definitely recommend. Thanks, jeffHelpful (13)
What is the proper offset for 2013 Shelby GT500 rear wheel 20x11
The Forgestar F14 Monoblock Deep Concave Monoblock Matte Black Wheel in 20x11 will have a +55mm offset, perfect for the rear of any 2005-2014 Mustang, including the GT500.
on Forgestars website they have 20x10.5 . is 20x9 the highest you guys carry for front wheels? I was thinking of going 20x10.5 up front and 20x11 in back.
We do not recommend going larger than a 20x9.5 in the front, though, we do carry this wheel in a 20x9.5, which is item number 384162G05, and you can find it here: https://www.americanmuscle.com/matte-forgestarf14-20x95-0514.html
Looking to put these on the rear of my 2014 Gt500. Will I have any rubbing issues if I wrap them in Nitto Invo 315/35/R20 wheels? I'm also concerned that they will stick out too far. Thanks!
No, you shouldn't have any issues with these Forgestar F14 Monoblock Deep Concave Monoblock Matte Black Wheels while using the NITTO INVO Ultra-High Performance Tires (397483-AO) as long as you are at stock height for your 2014 GT500. Also that size tire is about 12.4" wide, so keep that in mind for appearance purposes with the wheel.
Can you wrap these wheels in 305's?
A 305 will work fine on these 20x11 wheels.
Only the barrel is forged?
Hello! The Forgestar F14 Wheel is a cast wheel manufactured using Forgestar’s Rotary Forged Flow forming process.
Yes they will !
There is a drop down menu right below the price that gives you the option to select your year range for your TPMS.
Simple installation for anyone.
What's in the Box
|Offset:||2.16 Inches, 55mm|
|Backspacing:||8.20 Inches, 208mm|