(approx) 2 Hours
Simple installation for anyone.
- Basic Mustang Vinyl Instructions
- Customer Submitted:
- How to Install Hash Marks on your 2005-2009 Mustang
$18.99FREE Shipping on orders over $49
Hey I’m Justin with AmericanMuscle.com, here with a classic look in the form of these American Graphics and vinyl hash marks fitting all 2010 and newer Mustangs. These hash marks were used on early race cars in the 70’s to differentiate between drivers, but the look eventually carried over to both classic and modern muscle cars, looking right at home here on our Mustangs. There stripes are constructed using only the highest quality premium cast vinyl, and are available in your choice of either silver, red, blue, white, gloss black, and matte black. All of our AmericanMuscle graphics vinyl have been designed right here in house and then tested on our very own cars first so you can expect a perfect fit on your Mustang. As far as vinyl goes, the install with this kit really isn’t all that bad, of course it helps to have some of the basic necessities on hand before you get started, including your bottle filled with a soap and water mixture, and of course the included squeegee. If you take your time and follow the detailed instructions, you should be wrapped up in about an hour. So it you’re looking to add a little bit of that heritage styling to the front of your Mustang, at a price that’s hard to beat, then be sure to check out a set of these has marks right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 17, 2019
these stripes make your build look so much more aggressive. highly recommend them.Helpful (0)
October 03, 2019
I’ve had this one for several years now and it hasn’t shown any wear or fray or peeling. Its been through a lot of conditions and looks sharp. Well worth the money!Helpful (0)
August 30, 2019
Everything ok. Got the both sides done in more or less 20 minutes. I just cleaned the area with window cleaner and placed sticker on. Waited 5 minutes and peeled off slowly. Looks good.Helpful (0)
August 13, 2019
Matte Black Hashmarks
Decided to only order driver side. Looks very good. Just wanted to be different. Happy with price and result.Helpful (1)
April 28, 2019
Hash marks install
Love the matte black hash marks on my car. Easy install. Just take ur time to prep and install. Had them on for about a year and no problems so far.Helpful (0)
March 23, 2019
GREAT LOOK EASY TO INSTALL ON MY 2006 GT MUSTANG LIGHT BLUE WITH BLK .HASH MARKSHelpful (0)
February 13, 2019
Just such a simple change, made the front end look completely different, extremely easy installHelpful (2)
October 25, 2018
Am whatever I say I am(as described)
Quality is there(3M) it’s better then the 07 GT/CS factory ones I butted em up to. And they were simple to put onHelpful (3)
October 19, 2018
Nice Lowcost Appearance Mod
Looks terrific, adds a nice effect. Super easy to install, with no problems at all. Took about 30 minutes to install both sides. Directions clear, and easy to read. Also reviewed some YouTube videos for additional tips. I had a few tiny pinprick bubbles, and they faded out in 2 days when car was parked in the sun. All around great!Helpful (3)
September 02, 2018
I love It. They have more than enough colors to pick from. And they are super easy to put on.Helpful (4)
Do you have to cut this strip yourself? I know that with the hood accent decals you have to trim them to fit right on the hood. Is it neccesary to trim these so that they fit correctly over the wheel well?
Yes you do, I found it to be just as easy as the hood decals.
How thick are the stripes. Width wise? 2" 2.5"?????
Each of the Hash Mark Stripes Measure 2-1/2" Wide.
How long are these decals?
These stripes are 11 inches in length.
It mentions that each stripe is 2.5 inches. I'm wondering about the gap in between and how big is it? From the looks of it, it looks like 1/4-1/2 inch. Anyone can measure or tell me?
The gap between the two stripes is about a 1/2". Though, if you do not like the size, you are able to move them closer or further apart when you are installing them. Just make sure you have a enough soap and water so that they move around.
Is the strip only for one side or both sides ?
The package comes with both sides
Everyone has a different opinion on the Matte Black Hash Marks (05-14 All) however they look good and are available for both sides!
I have seen a few with just the right side but I did both, give a very distinctive look.
No, these stripes are not reflective. They are just a matte black color.
Answer to #1: read the label on the product. " " #2: high-pressure spray may dislodge them.
(approx) 2 Hours
Simple installation for anyone.
What's in the Box