(approx) 30 Minutes
Simple installation for anyone.
- Customer Submitted:
- How to Install Mishimoto Silicone Induction Hose - Black on your Ford Mustang
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2015 2016 2017 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
June 23, 2019
Nice bang for your buck
Easy install. Went without a tune. Good throttle response. Sounded better especially without the sound tube which the intake came with sound tube delete plug. Put a tune on it and it was even better. Recommend if you don’t wanna spend 300 for a full intakeHelpful (0)
May 17, 2019
Great addition to the coyote!
Very glad I got this air induction tube for the coyote engine. It seams to add some power and better engine/exhaust noise as well. The installation was straight forward and easy. The most difficult part is, as everyone agrees, is removing the sound tube and installing the plug. I'm glad to be rid of the factory sound tube and enjoying the natural exhaust tone with the added HP.Helpful (0)
March 11, 2019
It fits great. It looks great. I was trying to get some low end performance back from going to a much bigger tire and this definitely helped!Helpful (0)
January 23, 2019
Came with everything needed
Reading the reviews I was expecting to be short the firewall plug and 2017 hose cap. To my surprise the kit came with both. I also installed a resonator H pipe delete at the same time. Noticeable improvement in sound and acceleration after a week, I'm a happy camper...Helpful (0)
January 10, 2019
An upgrade worth doing
Quick easy install. Sounds great and drives just as amazing. Immediate feel of a better throttle response and like the car just overall breathes better. Definitely worth the money and is a great buy for anyone who wants great performance but doesn't want to spend $300 for an intake just because it looks pretty.Helpful (1)
November 15, 2018
A must have for people that dont want a full cai
I installed it found I have gained some power in the midrange as for gas mileage dont see any increase but if you own an gt mustang you not really looking for better gas mileage you looking for more power it will gain more power if you added an tuneHelpful (1)
December 30, 2017
Better than expected!
Noticeable difference in throttle response with stock air box.Helpful (3)
October 06, 2017
Installs in less than a 30 mins. A thing to note for the 2017 guys, one hole will have to be plugged but a dorman vacuum cap kit will have you squared away.Helpful (5)
September 01, 2017
Performs as expected.
This product is a heavy well built piece. There is no chance that it could collapse under high vacuum conditions. I definitely noticed better throttle response and better gas mileage. Great product overall. Be ready to delete the sound tube as there is no provision for it.Helpful (2)
August 22, 2017
I primarily got this induction hose to cleanly eliminate the sound tube. The extra 15hp that is promised by Mishimoto is something I wasn't gonna hold my breath for – but the car does seem to get better gas mileage??? I still beat on this thing real hard and pretty much drive in Sport 24x7 ... and I can still average 23 to 24mpg in mixed driving. Impressed! So – not entirely sure what kind of performance gains are to be had ... but either way I am really happy about eliminating the sound tube and the induction noise that is piped to the cabin. I only wish it would include the firewall plug to cap that off, which it does not.Helpful (3)
This says it is for the 15-17 GT, but is there a specific reason as to why this won't fit the 18-19? An answer from a previous question says it is a 95mm opening at the TB, and from everything I've found, the intake looks identical from the 15-17 to the 18-19.
There are physical fitment differences between the 15-17 and 18-20 models years, this will not fit 18-20 models.
What is the diameter for the inlet/outlet sides? Say in theory, can I mount this on my 90mm throttle body and use the MAF housing of a C L Racer CAI? Can the hose open up to stretch over? Thanks!
The Mishimoto Silicone Induction Hose has an inner diameter of 95 mm and will work well with your 90 mm throttle body and C&L cold air intake.
Will this fit a Ford GT 350 stage 3 power pack?
This will not fit any Ford GT350's
Can the Mishimoto script be removed for a cleaner look?
The Mishimoto Silicone Induction Hose - Black for the 15-17 GT will have the Mishimoto script printed on this hose. It will not be a sticker which will be able to be removed. If you would like to remove the script it would require custom modifications.
I already have C L Racer Cold intake, would this be a good swap for the induction hose provided by C L? I've had some bad experience with the rubber mount sliding off of the hose causing a leak. So I was interested in getting a one piece instead of the hose C L uses with the rubber extensions.
Hello! The Mishimoto Silicone Induction Hose is only designed to be a replacement for the Stock Air Intake Tube, so it may not fit with your C&L Intake.
Since you already have a Airaid CAI, you may not get much gains with this induction tube.
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box