Review & Install Video
Hey, guys. Stephanie with americanmuscle.com here with a review and install of the MMD Bumper Splitters in Matte Black for 2015 and newer S550 GT, V6, and EcoBoost Mustangs. In this video, we're gonna go over a few different topics when it comes to these bumper splitters. We're gonna talk about the styling, the materials and construction, and the install as well. We'll talk more about the install later, but I can tell you right now that the install for these is easy. It's a one out of three wrenches on the difficulty meter.
The MMD Bumper Splitters are gonna be a good option for those S550 owners out there that are looking to add just a little something to the front end of their Mustang. These can be added to a completely stocked Mustang to give it a little something to the appearance of the car, or they can help you tie together some other exteriors mods. Either way, these offer you a fast and simple way to give your Mustang a change in appearance.
These bumpers are just added to your factory bumper. They mount horizontally between the turn signal and fog lights, and MMD designed them to change the looks of the front end of the car in a very simple, very easy, and also reversible way. That's the beauty of these, in my opinion. They're so simple, yet they do make a difference in looks and you don't have to spend an arm and a leg or go with a completely aftermarket front fascia to get a change in looks. So you get one splitter for each side. And when it comes to materials, these are made from ABS plastic, which is commonly used for exterior styling because it's lightweight, strong, and durable.
These are gonna come with everything you'll need to get them installed. Like I said, a big plus here is that they're very easy to install. They install just with 3M tape that's already on the side of the splitters, so you don't even have to worry about placing it. They're also gonna come with alcohol wipes and adhesion promoter, so you can make sure you get a good bond between the splitters and the front fascia. One thing that I did wanna mention, though, is that these are designed to fit the S550 GT, V6, and EcoBoost models. They'll not fit the GT 350.
As far as price, you can expect to pay between $100 and $150 for these. Now, I don't have a whole lot to compare the price of these to since they are currently the only thing like this available on the site, but that's the nice thing about MMD. They're always coming up with different ways of changing the appearance of your Mustang.
When it comes to the install, it's not a difficult one at all, and it's gonna be a one out of three wrenches on the difficulty meter. There is a little bit more to the install than just sticking these on and going, so you can expect to spend an hour tops getting these on your car. You will need some basic hand tools because you're looking at getting to the fog and turn signal bracket and a jack and jack stands as well.
Once you have the front end of the car raised up, you can get to the fog light and turn signal bracket. You have to remove the clips holding the fender liner to the bumper and remove the screw from the bracket. Once that's done, you can prep and clean the mounting surface on the front of the bumper. I'd test split your splitters before actually installing them, but once that's done, you can remove the 3M from the back of the splitter and press it firmly into the bumper, sliding the splitter between the bumper and the bracket. After that, you can replace the screw and the bracket and get your fender liner back into place.
Wrapping things up here with the MMD Bumper Splitters, these offer you a fast and subtle way to change the appearance of the front end of your Mustang. They're very easy to install, and you can check them out more online right here at americanmuscle.com.
Race Inspired Styling.
Are you looking to give your 2015-2017 Mustang an aggressive race inspired appearance? If so, you should check out the Modern Muscle Design's Fog Light Splitters. These MMD Splitters mount horizontally between the turn signals and the fog lights to transform the appearance of your Pony from mild manner daily driver into an aggressive road warrior.
High Quality Construction.
Manufactured from an OEM quality injection molded acrylonitrile butadiene styrene (ABS), these MMD Fog Light Splitters were designed using the original OEM CAD data from Ford to ensure a perfect fit. ABS is an extremely strong material known for its light-weight, superior durability and impact resistance - making it perfect to withstand the hazards of daily driven vehicles.
Simple Peel and Stick Installation.
No messy glue or drilling is required for installation. These MMD Fog Light Splitters are designed to install simply with the pre-applied 3M doubled sided automotive bonding tape. Thoroughly clean the surface and then simply peel the 3M tape from the back of the Splitters and set them firmly in place It is just that easy.
These Modern Muscle Design Fog Light Splitters are designed to fit the 2015-2017 V6, EcoBoost and GT Mustangs. Not
compatible with Shelby GT350 models.
CA Residents: Warning: California's Proposition 65
- What's in the Box
- (1) Driver Side Front Fog Light Splitter
- (1) Passenger Side Front Fog Light Splitter
- Installation Info
Difficulty Level:Mechanical expertise or professional installation required.
- Tech Specs
- Will it fit my Mustang?
- EcoBoost - 15, 16, 17
- GT - 15, 16, 17
- V6 - 15, 16, 17