Installation Time: Afternoon
December 11, 2014
Let's be honest, the project MMD car showed this thing off like a badass. I finally pulled the trigger on the black friday sale, and I will say I am happy with the results. What YOU need to know before you buy it:
1. If you're a perfectionist, you might be upset with the fit. Where the hood meets the scoop where the screws are pulling them together, the fit is super close, and where the screws aren't, there's a slight gap. *You will only notice if you are looking very closely.
2. The paint match is exact, no issues there.
3. The stencil is just ok, as it is hard to maneuver around the curvature of the hood. Just measure every direction several times and pull really tight with masking tape.
4. The 2 screws for the front part do not come all the way out the bottom of the hood, making getting the washers and nuts on almost impossible. And the washers are bigger than the half inch hole you drill...So I had to use some old smaller washers I had laying around. (Why I won't give 5 stars, stupid mistake imo).
Bottom Line: Great looks for a great price, but there are a few things MMD could have done better. Check out the pictures, recently uploaded white mustang with black vents.