(approx) 30 Minutes
Simple installation for anyone.
Select Year2004 2003 2002 2001 2000 1999
Hey I’m Justin with AmericanMuscle.com, and I’m checking out MMD’s pre painted quarter window louvers fitting all 99-04 Mustangs, MMD is an industry leader that continues to product all kinds of styling parts, that can dramatically improve the attitude of any Mustang. Ok, so these louvers are totally unlike anything else for the New Edge Mustang, whereas a traditional louver design usually incorporates more of a GT500 or fastback style, these windows were designed to fit perfectly into the quarter window openings. The end result, as you can see with our 2000 GT, is actually pretty cool, and I will say works surprisingly well on these cars. The louvers themselves are constructed using a durable ABS plastic and then sprayed right here at AmericanMuscle.com headquarters, since these parts are sprayed here using the same base and clear coat Ford uses in their factory, you can expect a perfect color match on your ride. Ok, so we know the louvers are designed to improve your exterior appearance but what about the interior? Well unfortunately the result isn’t quite the same, as you can see the back of the louvers typically have a little bit of overspray and just generally aren’t that nice to look at. That’s why we offer some blackout quarter window decals. These decals are designed to improve the business side of things, making for a clean look inside and out. The best part is, these louvers install easily without the need for any drilling or messy Bondo. If you do decide to go with those quarter window blackouts you will need to install them first using a spray bottle filled with a soap and water mixture and the included squeegee. Once the decals are in place go ahead and clean the area with the supplied alcohol prep pads, once that alcohol is dry grab the 3M adhesion promoter, and wipe it down along the edges where the 3M tape will go. This is a very important step because basically it’s going to ensure a nice secure bond between the louvers themselves and the quarter window. Once that’s done, simply remove the protective backing on the preinstalled 3M tape, and adhere the louvers carefully to your ride, getting all this done should only take you 30 minutes but if you are installing those quarter window blackouts in addition to the louvers, just leave yourself about an hour. So if you’re looking for a totally unique louver option for your New Edge Mustang, all with the convenience of a pre painted part, then you have to check out MMD’s quarter window louvers available right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Technical Note. The MMD Zevens will not fit the 2011-2014 GT500 or Brembo Equipped GT's without the use of a small spacer
Fitment: 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 08, 2018
I like them look good on the car but dont stick goodHelpful (0)
July 20, 2017
Looks great, not a great fit!
Drivers side Fit perfectly but the passenger side didn't fit at all. I pretty much have one side not fully sticking to the window and this is after having to cut the window weathering strip. Looks amazing, not a perfect fit.Helpful (7)
July 08, 2017
Look really good but after taking off the top weather strips it still didn't fit right and some of the adhesive isn't in contact with the window and I'm afraid it will fall off.Helpful (0)
April 25, 2017
Nice Dress Up
These covers install easily and look good. The paint isn't an exact match, but close enough that no one who wasn't looking for it would notice the difference. Since my car is an '03, I pretty much expected that. The only reason I didn't give this product 5 stars is, the covers don't fit flush on the bottom front corners. A piece of molding is in the way. Again, though, it's not something a casual observer would notice.Helpful (0)
April 30, 2016
Fit issues with recommendation
First, they look great, but mine also had a bow that left a gap and fit concerns. 1. Remove the upper trim as in the instructions. 2. Trim the lower rubber trim about 1/8 inch. I also had trim that needed to be cut vertically first at the leading edge right along the window, allowing me to move it in front of the louver instead of under it. 3. Definitely test fit and place the leading edge flush first, contrary to the instructions. This left the bow at the upper curve of the window. 4. After cleaning with alcohol, using adhesive prep, place leading edge, then bottom edge, press firmly, when confident they are secure (a couple seconds) work the bowed area flush. I pressed all edges until the creaking sounds stopped. Looks great with a secure, flush fit all around.Helpful (4)
December 27, 2015
They great looking and great fit the color match nicely shipping was fast AM is great place to buy from they do a great jobHelpful (0)
May 28, 2015
Very simple to instal, was worried that the pre painted part wasn't going to match my faded color black but it is spot on, and looks like it came with it. Very worth it.Helpful (0)
October 31, 2013
i order the wrong Louvers but I like these better
Great job of painting them perfect color like they came with the car when it war new/ It give the look I want.Car is a 2002 GT Stang not babied but loved by a grayed hair car lover.Easy to work with like all the product you sell.Helpful (0)
August 21, 2013
Great appearance upgrade !
Needed a little pop to me zink yellow stang .orderd it painted black was very happy with the paint job over all a great addition!Helpful (3)
July 09, 2013
I ordered these for my 02 GT. They look really nice and have a really good fit. They go on very easy and make a nice change to the appearance. Yes they are a little expensive, but the look is worth it. I had only 1 issue. The appearance from the inside of the car is unfinished, like the video says and can be fixed with either a decal to cover the backside of the window or what I did, make a simple trim panel. Its a simple problem and wasn't much of an issue for me to consider not recommending itHelpful (4)
No highland green?
Unfortunately we haven't had much demand for several colors, including the Dark Highland Green. We'll definitely keep this request in mind for the future though!
Can you buy the black out pc. by it's self ?
We offer the American Muscle Graphics Matte Black Quarter Window Blackout here: https://www.americanmuscle.com/quarter-window-blackout-9904.html
Do you know if the company has Sonic Blue in stock or is that in a category of low demand?
No, we do not carry the sonic blue coloring for this quarter window scoops at this time.
Does the blackout accesory go on the outside? Do the quarter blackout decals go on the outside or the inside?
The blackout decals go on the inside but see no need it windows are already tinted. I purchased both but returned the blackout panels as you could no see the back side of the louvers from inside the car.
when do you think the performance red pre-painted ones will be here?
Performance Red is one of the (4) new colors we've just added to our list of available color options. Enjoy!
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box
Does not fit Bullitt or Mach 1 models. Does not fit convertibles