Davies Craig EWP115 Nylon Remote Electric Water Pump; 12-Volt (Universal; Some Adaptation May Be Required)

High-Performance Electric Water Pump. The Davies Craig EWP115 Nylon Remote Electric Water Pump, 12-Volt, is designed to enhance engine cooling efficiency by replacing or supplementing traditional mechanical water pumps. It improves cooling capacity, leading to increased engine power, torque, and fuel economy by reducing engine load and precisely managing coolant flow. This pump is suitable for a wide range of vehicles from small to high-performance and 4WD applications.

Construction and Features. The pump is built from durable Nylon 66 material reinforced with 30% glass for strength and heat resistance. It incorporates a ceramic face seal to ensure long-lasting reliability, with a compact and lightweight design weighing approximately 920 grams. The pump uses a clockwise centrifugal design with a volute chamber optimized for efficient coolant flow.

Installation. Installing the pump typically requires removal or modification of existing mechanical water pumps and thermostats, depending on the setup. Most installations do not require complex drilling. However, minor adaptations—such as drilling holes in the thermostat plate to enable proper coolant circulation—may be necessary in some configurations.

Application. This electric water pump fits universal applications but may require some adaptation based on the specific vehicle and hose sizes. It is appropriate for engines of various sizes, including small, medium, large displacement, and high-performance configurations.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov