Win A 2018 RTR Spec 3 Mustang! Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

MMD Headlight Splitters - Pre-painted (05-09 GT, V6)

Market Price $129.99 You Save 23% ($30.00)
Our Price

$99.99

FREE Shipping
  • Item 98600

Select Year

2009 2008 2007 2006 2005

Select Color

    Choose options to add to cart

    Features, Videos & Details

    • Matches 2005-2009 Factory Mustang Colors
    • Painted Right Here at AmericanMuscle!
    • Aggressive GT-R Styling
    • Durable Automotive Grade ABS
    • Sold as a Set of Two Splitters
    • Fits All 2005-2009 V6 and GT Mustangs.

    Review & Installation Video

    Hey what’s up everyone I’m Justin with AmericanMuscle.com, and I’m checking out these GTR inspired pre painted MMD headlight splitters for all 2005-2009 Mustang GTs. MMD is an industry leading appearance brand which continues to produce awesome, must have styling parts for your Mustang, as shown here with these splitters. Now these splitters are inspired by the 2005 road race concept Mustang GTR which besides its awesome performance and handling, was equipped with some really innovative styling cues such as these splitters. These splitters are made from durable ABS plastic and then painted right here at AmericanMuscle headquarters using the same base and clear coat that Ford uses in their factory making for a perfect match right out of the box. Installation is very easy thanks to the 3M tape and everything included with the kit. Your first step is to prep the back of the splitter using the supplied 3M adhesion promoter, after that go ahead and apply the 3M tape and set the splitter aside. You’ll then want to prep your headlight using the supplied alcohol prep pad, making sure the area is nice and clean. Once you’ve done that, go ahead and grab the splitter, align it with the center dot on your headlight, and adhere firmly. Getting everything installed shouldn’t take more than a half hour. So if you really want to set your S197 apart from the pack, and evoke a little concept car styling, you’ll definitely want to check out these pre painted splitters from MMD.

    Aggressive GT-R styling. The GT-R was a Concept Race Mustang that packed both power and styling and now you can have the look of its iconic headlight splitters for your very own Pony. These MMD GT-R style Mustang headlight splitters are not only made of durable ABS for a long life, but are available pre-painted to match your Mustangs factory color straight out of the box!

    Painted Here to Match 2005-2009 Factory Mustang Colors. These Modern Muscle Design Mustang Headlight Splitters are painted right here, at AmericanMuscle HQ, to match your stock Ford Mustang colors exactly. They will give your Pony a sleek, sexy appearance that will make it stand out from the rest of the herd.

    Durable Material. Constructed of a durable injection molded ABS plastic, these MMD Mustang headlight splitters are painted with the same base coat and clear coat urethane paint Ford uses on the exterior of your Mustang for a perfect color match.

    Simple Install. No messy glue or drilling is required for installation. This set of two Modern Muscle Design Mustang headlight splitters are designed to install simply with the supplied 3M doubled sided automotive bonding tape for a quick and easy installation.

    Application. These GT-R style MMD Mustang headlight splitters are designed to be a perfect fit on any 2005 to 2009 GT or V6 Mustang and are sold as a set of two, one driver side and one passenger side.

    Find Your Paint Code

    • Choose the year of your Mustang from the options above. The color choices displayed will be the only exterior paint colors available for your year Mustang. The first two letters for each color option are the paint code for your exterior color.

    • If you need to verify your paint code, look inside the door jam of your driver's side door at your VIN plate to find your exterior paint code.

    These Headlight Splitters are also available Unpainted for those who like to do-it-yourself.

    Fitment: 2005 2006 2007 2008 2009 Details

    What's in the Box
    • (2) Headlight Splitters
      Hardware included:
    • None Required
    Installation Info
    Will it fit my Mustang?
    • Bullitt - 08, 09
    • V6 - 05, 06, 07, 08, 09
    • GT - 05, 06, 07, 08, 09

    Does not fit GT500

    People Who Bought This Item Also Bought

    Most Helpful Reviews

    5/5
    Awsome

    Awsome paint match and perfect fitting, when instaling these turn your head lamps on your a while and leave them on that way it heats up the tape a bit! :)

    Helpful (12)

    5/5
    3m tape

    If you are having problems with tape sticking make sure you clean surface and heat slightly with heat gun or hair dryer.and hold in place until it cools.(do not use high heat).

    Helpful (6)

    Overall Rating 4.6 out of 5 stars
    Read All 85 Reviews

    Customer Photos (100+) Submit Your Photo

    View All 100+ Photos

    You Might Also Like

    11 Questions / 7 Answers

    Ask a Question

    Are these legal in all states?

    DonaldH

    • There are not any restrictions on the headlight splitters.

      KevinD92

    Helpful (1)

    Will these fit the '06 Saleen, given the Saleen has indicators/parking lights located on the metal between the headlight and the grille? I'm thinking probably not.

    JaneC

    • I do apologize but the MMD Headlight Splitters will not properly fit on the 05-09 Saleen Mustangs due to the indicators molded into the bumper.

      AMCoal

    Helpful (0)

    Will these fit the 2005 gt500 facia kit?

    Zephyr429

    • The MMD Headlight Splitters will not fit GT500 Models, or cars with a GT500 Front Fascia conversion.

      Rob D

    Helpful (0)

    I noticed that for the 2005 it does not have the option for Redfire paint. Is this color not available for the 05 splitters? If i change to 06, the color appears.

    s197Class

    • The Redfire (G2) paint option is available for 2005 model Mustangs.

      KevinD92

    Helpful (0)

    Will these fit over my smoked headlight covers?

    Lorenzo

    • The MMD Headlight Splitters are just long enough to reach across the headlight without the cover. With a smoked headlight cover, it will make the splitter stick out a little further, and it may then not be long enough depending on how far the cover extended passed the head light lens.

      AMJEFF

    Show 1 more answer Helpful (0)

    Can I get splitters in a chrome color?

    Quietstorm

    • Hi, These Pre-painted MMD Headlight Splitters will only come in factory paint codes, We do offer them unpainted so you can have them painted any color you like. Heres the link http://www.americanmuscle.com/mustang-unpainted-splitters-0509.html

      Chris J

    Helpful (0)

    More Products You Might Like

    Customer Reviews (85) Write a Review

    Overall Rating 4.6

    out of 5 stars

    Installation Time:Less than 1 Hour

    • Color Match 4.945946 4.9
    • Fit & Finish 4.243243 4.2
    • Appearance 4.690476 4.7
    • Bang For Your Buck 4.047619 4.0



    • 5/5

      January 27, 2010

      Awsome

      Awsome paint match and perfect fitting, when instaling these turn your head lamps on your a while and leave them on that way it heats up the tape a bit! :)

      Erik Robles

      Helpful (12)

    • 5/5

      January 01, 2010

      3m tape

      If you are having problems with tape sticking make sure you clean surface and heat slightly with heat gun or hair dryer.and hold in place until it cools.(do not use high heat).

      Angelo

      Helpful (6)

    • 5/5

      June 19, 2010

      Mustang HL Splitters

      Very easy install, slight modifications required for the Roush front-ends

      John Schiffer

      Helpful (5)

    • 4/5

      Installation Time: Less than 1 Hour

      September 07, 2013

      Great finish, could fit better

      These give a really aggressive look to the front end but I am constantly having to push them back onto the headlights towards the grill pillar and the outside close to the fender. The headlight has bit of a curve to it and this product doesn't match the curve. On the inner part a thinner layer of 3M tape could be used to help ensure it sticks but I have taken it through a car wash already and they seem to hold just fine despite. For color finish and over all look I highly Recommend these.

      Omeanix

      Year: 2007 Submodel: Other Hickory, NC, USA

      Helpful (3)

    • 5/5

      March 26, 2010

      Great Looking

      Insulation was okay, just make sure you use a hair dryer on both parts if temperture is cool. Great looking, people noticed them right away>

      Al Garrelts

      Helpful (3)

    • 5/5

      November 13, 2009

      Headlight Splitters

      If you guys are going for the boss 302 type look, or just want to set yourself apart, these splitters hit the mark. Very high quality, haven't had problems with them yet. Just make sure you check your measurements twice because if they are out of alignment, you WILL notice.

      Greg

      Helpful (3)

    • 4/5

      Installation Time: Less than 1 Hour

      June 11, 2013

      Nice but could be made better

      One of two things that are wrong with this product. FIRST AND FOREMOST the molding of it is all off, the splitter is flat but the contour of the headlight and the nose clip are curved so the splitter does NOT sit properly on the headlight. That cause stress on the 3M tape and it separates from it. SECOND the 3M tape provide is not the best to apply and STICK to both the headlight and splitter. Could use some more thinking on American Muscles part!!!!!

      redang

      Year: 2006 Submodel: V6

      Helpful (2)

    • 4/5

      Installation Time: Less than 1 Hour

      March 11, 2013

      Splitters really make a difference!

      Very easy to install and looks great, especially if you have the Raxiom projector headlight like I do! It does take a little heat to get them to mold to the headlight curvature. Now people take photos of my car where ever I go!

      Filmguy57

      Year: 2006 Submodel: GT Las Vegas, NV, USA

      Helpful (2)

    • 5/5

      Installation Time: Less than 1 Hour

      August 17, 2012

      head light splitters

      They make the stang look "Great" However, make sure you put it on straight the first time, you are not getting them back off !!!! With that being said, 1) Make a pattern of the lens with a peice of paper.2) draw a line in the middle of the paper. 3) Cut down the line,cutting the paper in half. 4) put ethier half back on the light,and use tape to hold it in place, not to interfer with the light slitters. This gave me a perfect straight line to follow. 5) making sure not to stick it to the paper , place it on the headlight. Do the same for the other side ,and your done. ALSO: Make sure you follow the prepping instruction to the letter. It took me about 35 min. to do. Good luck!

      mustanglori

      Year: 2006 Submodel: V6 cape coral, FL

      Helpful (2)

    • 5/5

      June 05, 2011

      Headlight Splitters

      The splitter comes apart from the tape at the ends due to the slight curve. The splitter needs to be corrected so that it fits properly onto the headlight. In addition if the splitter had a solid back for the 3m tape it would have a larger area to adhere to.

      Gunny

      Year: 2007 Submodel: GT

      Helpful (2)

    • 4/5

      March 28, 2011

      Looks great!

      You may think that this is a bit pricey for such a small cosmetic piece, but trust me when I say that it definitely adds flare to the front end of your car. Once you get it on, you will realize that it's worth every penny. The only concern I have with this item is that the splitter comes apart from the tape at the ends due to the slight curve. I would have liked to see a completely flat base to the splitter so that the 3m adhesive has a larger area to stick to.

      Liti

      Year: 2005 Submodel: V6

      Helpful (2)

    • 4/5

      June 20, 2010

      Splitters

      While they do look good installed, unless your bumper and everything lines up just perfect that can be a pain to get on right. Plus it would be nice if the 3m tape was already attached to the splitters like most every other product you buy that uses it. But overall Im still happy with them.

      Jeff Southard

      Helpful (2)

    • 5/5

      June 11, 2010

      Awesome Add-On

      Sets yourself apart from the other Mustangs!

      John Felhofer

      Helpful (2)

    • 4/5

      May 13, 2010

      Splitters

      Not that difficult to install, looks good, but we have had a problem with the tape not sticking well...this could our fault

      Unknown

      Helpful (2)

    • 5/5

      May 11, 2010

      2005 Headlight splitters

      Excellent product Easy instllation

      Jean-Denis Bachand

      Year: 2005

      Helpful (2)

    • 4/5

      April 23, 2010

      used with Spec-D dual Halo Headlights

      I like these with my new headlights a lot! I had them put on professionally when the headlights were swapped since they were there already. The shop did not heat the tape though and I need to see about getting new tape and installing myself to get it right. they are pulling away just a little.

      Dave

      Helpful (2)

    • 4/5

      April 02, 2010

      Headlight Splitters

      My order was processed as expected and delivered in about 5 days. One of the splitters had a defect; it was thicker than the other and did not fit against the headlight as well. American Muscle promptly processed an exchange and the shopping experience was great.

      Rob

      Helpful (2)

    • 5/5

      March 23, 2010

      headlight splitters

      Easy install and outstanding looks. Be careful with the adhesion promoter when applying to back of the splitter.It will trash the paint If you dribble and then touch the paint

      Wade

      Helpful (2)

    • 4/5

      March 20, 2010

      Nice paint

      Overall the product was very good and the paint match and quality were outstanding. The issue I have is the tape. The splitters started coming loose after a few days. I had to pull them off and use some 3M tape purchased from Advanced Auto Parts.

      Frank

      Helpful (2)

    • 4/5

      March 03, 2010

      3M Tape

      They look great, but the tape doesnt stick to well. Other then that I love the new look

      D-Mac

      Helpful (2)

    Related Mustang Categories