$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

OPR PCV Grommet (85-04 All)

Market Price $4.99 You Save 20% ($1.00)
Our Price

$3.99 (each)

FREE Shipping on orders over $49
  • Item 17552
  • MPN# 17552

Out of Stock Notify Me Choose options to add to cart

Features & Details

  • Perfect for Installing New PCV Valve
  • Rubberized Construction
  • Fuel and Oil Resistant Rubber
  • OEM Quality Replacement
  • Fits All 1985-2004 Mustangs
Routine Maintenance. When replacing your old stock PCV (positive crankcase ventilation) Valve be sure to replace the factory rubber grommet at the same time to ensure a secure tight fit that will prevent any oil leaks. 

OEM Quality. Made from a durable fresh rubber compound to the original factory specifications, this replacement OPR PCV Grommet Seal is an exact reproduction of the original for a perfect fit and reliable operation.

Application. This OPR PCV Grommet is a direct fit replacement for all 1985 to 2004 Ford Mustangs including the LX, V6, GT, Bullitt, Mach 1 and SVT Cobra models.

Fitment: 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Details

What's in the Box
  • (1) PCV grommet
Installation Info
Will it fit my Mustang?
  • Bullitt - 01
  • Foxbody - 85, 86, 87, 88, 89, 90, 91, 92, 93
  • Mach 1 - 03, 04
  • V6 - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04
  • Cobra - 94, 95, 96, 97, 98, 99, 01, 03, 04
  • GT - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
pcv grommet

Works great. Nice and tight fit, better than the old one where oil was leaking out a bit.

Helpful (2)

2/5
Poor Fit

While changing valve cover gaskets I also changed the PCV valve and this grommet. Very difficult to get the grommet in place them then the PCV could not be set. The hole was too small. Seems the sizing ...

Read More
Helpful (2)

Overall Rating 4.4 out of 5 stars
Read All 25 Reviews

Customer Photos (7) Submit Your Photo

View All 7 Photos

You Might Also Like

1 Questions / 1 Answers

Ask a Question

Does this fit both sides of a 96-98 4v motor, I got one for the pcc and that fits perfect but does it work for the other side where it connects to the hose that connects to air intake? Not sure if they are same size or not, thanks!

mustangmitch23

  • You potentially could utilize this grommet elsewhere on the vehicle, however, it is designed and intended to be used when installing a replacement PVC valve. You likely will need a clamp to secure that hose connecting to the air intake.

    James B

Helpful (0)

More Products You Might Like

Customer Reviews (25) Write a Review

Overall Rating 4.4

out of 5 stars




  • 2/5

    May 25, 2014

    Poor Fit

    While changing valve cover gaskets I also changed the PCV valve and this grommet. Very difficult to get the grommet in place them then the PCV could not be set. The hole was too small. Seems the sizing was just not correct.

    88TTop

    Year: 1988 Submodel: GT Canastota, NY 13032, USA

    Helpful (2)

  • 5/5

    February 20, 2014

    pcv grommet

    Works great. Nice and tight fit, better than the old one where oil was leaking out a bit.

    5SHAMROCK5

    Year: 2001 Submodel: GT CA

    Helpful (2)

  • 1/5

    December 28, 2016

    didnt fit my 2001 gt

    didnt fit the gromet was to big wasted money and time

    philsteezy

    Year: 2001 Submodel: GT

    Helpful (1)

  • 5/5

    November 18, 2016

    Good

    Very good product. Installation was quite a hassle but other than that it's easy.

    FLStangGang

    Year: 2003 Submodel: V6

    Helpful (1)

  • 2/5

    September 29, 2016

    No Good

    Unfortunately this valve grommet did not come anywhere close to fitting my 1989 mustang gt. The valve would not fit in the grommet. A snug fit is always good, but in this case it was a little too snug.

    MuskieFreak

    Year: 1989 Submodel: GT

    Helpful (1)

  • 5/5

    July 12, 2016

    GOOD FIT!

    Used on my 96 cobra and the fit is very tight and snug no more leaking!

    Jlioi1017

    Year: 1996 Submodel: Cobra

    Helpful (1)

  • 5/5

    August 03, 2015

    PCV Grommet

    I bought this for my 2001 GT. I replaced the PCV valve because it was idling kind of bad. Come to find out when I pulled my PCV valve the factory grommet was still in great shape. It still looked new, but I replaced it anyway. I wanted to make sure there was a tight seal. It's a good product for the price. The shipping was also fast. Thanks AM!

    Weazle

    Year: 2001 Submodel: GT Ashford, AL

    Helpful (1)

  • 5/5

    January 20, 2015

    Perfect fit

    Genuine OEM part = perfect fit. FAST shipping from American Muscle!

    E4NASH

    Year: 1995 Submodel: GT Canton, GA, USA

    Helpful (1)

  • 5/5

    November 30, 2014

    Tight Fit, Great Price!!

    These grommets are much tighter than my old 99 grommets, which I really appreciate to insure that I don't have a vacum leak or any unfiltered air getting into my crankcase. They are not a "pretty" and rounded as the original, but functionally they are better. You can't go wrong with these grommets, especially for the price! and free shipping to boot!

    CudaCobra

    Year: 1999 Submodel: Cobra Monument, CO, USA

    Helpful (1)

  • 5/5

    September 19, 2014

    easiest install ever

    It couldn't have been simpler to install. I ordered the product Wednesday afternoon and it was at my door before the end of Thursday. Took me under 5 minutes to remove the old one and install the new one. Like always American muscle comes through again

    killerstang94

    Year: 1999 Submodel: GT Queens, NY, USA

    Helpful (1)

  • 5/5

    May 24, 2014

    Perfect Replacement

    Perfect fit as a replacement to the old stock worn out one. A tip for installing is to oil it up so it goes in easier.

    CuriousMustang

    Year: 2000 Submodel: GT

    Helpful (1)

  • 1/5

    May 17, 2014

    Too big.

    I was putting this on my Trick Flow lower intake, but even with lube it didn't want to go in. It eventually broke. Maybe this works on other intakes (mine was spotless clean by the way), but not mine. Ask your local auto parts store if they have extras just in case you need it.

    FiveoJoe

    Year: 1993 Submodel: GT Largo, FL

    Helpful (1)

  • 5/5

    June 27, 2013

    nice product

    great fitment. nice replacement part. pcv fits nice and tight

    MikeAM

    Year: 1996 Submodel: Cobra PA

    Helpful (1)

  • 5/5

    May 20, 2013

    Keep your valve covers clean

    This is a quick and easy way to get rid of the gunk that seeps out from around your PCV valve. There is no reason to have grimy valve covers thanks to American Muscle!

    Clean02

    Year: 2002 Submodel: GT Ames, IA

    Helpful (1)

  • 5/5

    May 15, 2013

    better than the oem grommet

    this grommet seems to have a better hold and fit definitely a must with a new pcv. cheaper than most places and a better product too.

    Skary

    Year: 1997 Submodel: Cobra

    Helpful (1)

  • 5/5

    June 30, 2017

    Solid piece

    You get what you order. Its a quality rubber groumet seems to be the correct part.. Looks more durable than the one that has been in the car when i bought it. Have not installed yet because i will be installing other mods at the same time. I will check back and let ya know how the fitment it but as far as i can tell itll fit perfect!

    IgnacioG

    Year: 1996 Submodel: GT

    Helpful (0)

  • 5/5

    June 15, 2017

    Works as advertised

    I went through several different brands and part numbers for a new PCV grommet before finding this one on AM. The others I had found all said they fit my car (97 Mustang GT) but didn't - either the diameter of the hole or the depth was incorrect. This PCV grommet from AM fit perfect and the PCV valve fits tight. It took a little work to get it into the valve cover, but with a little patience, it worked out fine.

    KellyM

    Year: 1997 Submodel: GT

    Helpful (0)

  • 5/5

    February 12, 2017

    Perfect seal.

    This grommet is a perfect fit. A little work to get it in there and that's a good thing. Nice tight seal. Motorcraft PCV Valve fits nice and snug. Highly recommended.

    KennyD

    Year: 2001 Submodel: V6

    Helpful (0)

  • 5/5

    June 08, 2016

    Not as pretty but fits better than OEM.

    Stopped air leak by and made the car run a little better, definately worth a couple bucks.

    JohnEXD

    Year: 1999 Submodel: Cobra

    Helpful (0)

  • 5/5

    September 06, 2014

    Needed replacement.

    I changed out my old grommet and change it. It was tight to put on the valve cover Cheap and great for replacement.

    Christo

    Year: 1999 Submodel: Cobra San Diego, CA, USA

    Helpful (0)

Related Mustang Categories