(approx) 2 Hours
Light to Moderate mechanical skill required.
If you're looking to freshen up the front calipers on your 2005 to 2014 non-Brembo GT or V6, along with adding a small touch of color behind your favorite set of wheels, well then you might want to consider checking out these affordable replacements from Power Stop. Now, price point or the re-manufactured two-piston, two-piece cast iron design will be right around $100 mark, while the install itself will involve, of course, removal of the stockers and bleeding the brakes. So, therefore, we are going to knock this one up to a two out of three wrenches on the difficulty meter and maybe a couple of hours to complete from start to finish.So, again, the Power Stop kit that we have here might be a great option for those S197 owners who are possibly dealing with a faulty or maybe even seized up caliper and you just want to clean up the appearance a little bit, but don't want to sink hundreds or even thousands of dollars into a set of big brakes like you would with a Brembo kit, Wilwood, or any other aftermarket option.Now, granted a lot of those aftermarket big brake kits are certainly more than just an appearance upgrade as you are getting superior hardware with them, this includes bigger calipers, more pistons, more aggressive pad compound in a larger rotor. Whereas a Power Stop kit, here on the other hand, is simply going to offer a set of freshened up factory calipers, but with that bright red powder coat. So, what I'm trying to say here guys is don't expect any massive upgrades in stopping power from the calipers alone. Now, of course, you could always pair these calipers up with a matching Power Stop kit such as a Z23 or Z36 pad and rotor combination if you are looking to make a slight increase to your stopping power.Now, these Power Stop calipers do feature that factory two-piece re-manufactured cast iron design that have been gone through freshened up using high quality parts, such as new seals, boots, lubricants, and all that good stuff before being finished off in that eye catching bright red powder coat, which, by the way, will be far more durable compared to a traditional paint. Now, each caliper is pressure tested before being sent out and Power Stop claims that these will either meet or exceed the performance of your factory calipers, and they're so confident in them that they include a three-year 36,000 miles warranty with each set.But switching gears, this is just going to be just a general overview guys and not a detailed walkthrough, but as far as the installation is concerned, removal of the factory front calipers is the biggie first before moving on with the actual installation of the Power Stop kit. This will also require you to bleed the brakes entirely, which, altogether, is we're going to knock this install up to, I would say, a solid two out of three wrenches on a difficulty meter and a couple of hours to complete from start to finish.So, wrapping things up here. If you're looking to replace a set of worn-out or damaged stock calipers, or you just like the visual improvement of the bright red powder coat on your non-Brembo '05 to '14, then be sure to check out the Power Stop options right here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Easy Upgraded Braking and Looks. The Power Stop Performance Brake Calipers are designed for the driving enthusiast with practicality and style in mind. They bolt straight in place of the factory calipers and fit behind custom or stock wheels. All-new top-quality replacement parts are used, including high-temp silicone lube for the caliper pins, ensuring long life.
2 Piston OE Spec Calipers. These stylish brake calipers are quality remanufactured to exceed stock performance, using the highest-quality parts and lubricants. The bright-red powder-coat finish withstands high temperatures, resists corrosion and staining, and looks fantastic behind stock and aftermarket wheels.
Exceeds Factory Caliper Performance. Power Stop Performance Brake Calipers are remanufactured to upgrade the performance of all parts in these cast iron calipers so you get bolt-on braking performance that exceeds the levels of stock items. Totally new premium seals and boots are used, and the calipers are fully pressure tested.
Direct OE Replacement. The Performance Brake Calipers provide an identical fit to your Mustang’s factory calipers so they simply bolt in, replacing the old stock parts. Their compact OE dimensions mean they won’t interfere with your existing wheels. Installation should take no more than two hours.
No-Hassle Policy. In addition to a three-year, 36,000-mile limited warranty, Power Stop provides a sixty-day no-hassle return policy.
Application. The Power Stop Performance Brake Calipers are direct factory replacement items for standard GT and V6 Mustangs from 2005 to 2014. They DO NOT fit models with Brembo front brakes.
Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
Power Stop S4928
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
May 15, 2020
They have the Ford logo clearly visible, so I don't think they have any more stopping power than stock, but they look greatHelpful (0)
May 07, 2020
Got ready to install these tonight and caliper bracket would not line up. Was to short and the holes were not close. 1st and last problem I’ve had with AM. Not sure what my next move will beHelpful (0)
April 22, 2020Helpful (0)
April 12, 2020
Better than expected
Restores and boost braking performance Paint is immaculate minus a few areas on the inner parts of the caliper Easy to install and definitely a great project for someone looking to get into DIY car repairs / upgrades Only complaint would be the time it took to arriveHelpful (0)
February 19, 2020
Front brake calipers
It has a good upgrade towards stock easy to install and good performance . Also the color red gives you a sport look on carHelpful (0)
January 29, 2020
Fit perfectly with the rotors and pads I bought. Absolutely flawless red powder coat looks great. Better stopping power than stock but that may be due to the ceramic pads and new rotors.Helpful (0)
January 28, 2020
Installed the power stop front brake calipers over the weekend. The car has a much better feel at breaking over the OEM front calipers.Helpful (0)
December 10, 2019
GT 500 wheels
I recently purchased a set of wheels and had trouble at first with the install. Ended up having to buff the center pieces to get the wheels to mount flush on the hubs. I called tech services and they did an awesome job helping me out. These wheels really changed the look of my stang! Thanks American Muscle for an awesome product!!Helpful (0)
November 29, 2019
Mustang brake system
Power stop breaking system looks and works great on my 2014 ford mustangHelpful (0)
October 12, 2019
This look great in the car it is amazing how much better it looks. Thank youHelpful (0)
I run 16" rim wheels for snow tires on 2008 V6 ponypackage as recommended by tire rack. Are these an exact dimensional replacement to the OEM v6 calipers? Tire rack seems to suggest the GT and V6 use different sizes.
These Power Stop Performance Front Brake Calipers meet the same dimensions and specifications as the original OEM equipped calipers. These calipers will work on all V6 Mustangs and standard package GT Mustangs.
Hello. 2 questions: 1. I have the Power Stop Z26 rotor and pad kit, and Russell steel brake lines. Assuming these Power Stop front, and rear (planning to buy both), will work with them? 2. Are they as durable as the OEM calipers? I have the stock OEM on my 2008 GT since 2008 and they are still going strong. I am just looking for something with more stopping power but at a lower price than big brakes.
These calipers will be compatible with your setup. These reuse OEM caliper housings and will be every bit as durable as OEM.
The Power Stop brake pads currently on my 2006 GT only have 200-300 miles on them. Can they be re-used with these calipers?
I was wondering if I can get these in a BLACK powder coat? Thanks for your time.
I apologize, we only offer these in red at the time being.
Do you know if those calipers can be installed and works in a 2013 V6 Base Automatic? Thanks!!!
Yes, these will fit your vehicle.
These would be a direct replacement for the factory calipers, you will be retaining the factory size and spec rotors and pads.
The Power Stop Performance Brake Calipers are direct factory replacement items for standard GT and V6 Mustangs from 2005 to 2014.
Yes, as these are a direct upgrade replacement they will work with the pads for the same vehicle.
The caliper pistons should be pressed back to their fully recessed position prior to installation. We recommend using a dedicated caliper spreader tool to press the pistons back.
The caliper mounting bolts should be tightened the same amount the OEM bolts are tightened. The flats were replaced by the hex to make holding the slid pin in place easier.
The MGP Caliper Covers can be installed on these Powerstop Brake Calipers since they retain the original OEM specifications.
The Power Stop Performance Front Brake Calipers will fit your 11' Mustang V6.
The Power Stop Performance Front Brake Calipers, will not include brake pads. However if you need any assistance finding the right pads for your call feel free to reach out to us using the link below. https://www.americanmuscle.com/contact.html
(approx) 2 Hours
Light to Moderate mechanical skill required.
What's in the Box
Not Compatible on Brembo Equipped Models