Improve Off The Line Acceleration.
Is your 1986-1993 5.0L Fox Body Mustang only driven a quarter mile at a time? If you answered yes a set of Richmond Excel 4.56 Ring and Pinion Gears are probably in your future. Featuring a much steeper ratio than the factory installed 3.08 or 3.27 gears, these Excel 4.56 Gears are ideal for serious drag racers that are looking for faster acceleration and quicker 60 foot times. While 4.56 gears can be used on the street they are really intended for drag race applications.Superior Quality.
Richmond proudly manufactures their Ring and Pinion Gear Sets right here in the USA. Using state-of-the-art manufacturing processes and extensive quality control testing, Richmond produces a superior quality Ring and Pinion Gear Set at an excellent price. Richmond is so confident in the quality of their products that they back them with a 6 month, 50,000 mile no-nonsense warranty. Recommended Upgrade.
Please note that when changing the gear ratio of your Mustangs rear differential that the calibration of your speedometer will no longer be correct and will display the wrong speed. However, you can easily fix this annoying issue with a new Speedometer Gear
This 4.56 ratio Richmond Excel Ring and Pinion Gear set will fit all 1986 to 1993 V8 Mustangs equipped with an 8.8" solid axle rear end, including the GT, 5.0 LX, and SVT Cobra models. A master bearing kit is recommended by most installers, especially on high mileage vehicles, see drop down option above.
Technical Note. Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov