Win $5,000 For Your Mustang! Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

American Muscle Graphics Silver GT500 Style Stripes - 10 in. (79-93 All)

Market Price $139.99 You Save 18% ($25.00)
Our Price

$114.99

FREE Shipping
  • Item 26167G79
  • MPN# 26167G79

In Stock Ships same business day. Choose options to add to cart

Features, Video & Details

  • Shelby GT500 Styling
  • Premium Cast Silver Vinyl Material
  • Includes 3 Pre-Cut Sections for Easy Installation
  • Dual 10" Wide Stripes
  • Fits All 1979 to 1993 Mustangs

Review & Installation Video

Review & Install Video

Hey I’m Justin with AmericanMuscle.com, and I’m taking a closer look at our AmericanMuscle graphics GT500 style stripes, fitting all 94-04 Mustangs. The Shelby GT500 needs no introduction, these amazing cars have been the pinnacle of cold performance ever since 1967 and continue to raise the bar to this day. These stripes are offered in 5 and 10” widths and several different color options including matte black, silver, white, and gloss black. All of our AmericanMuscle graphics are designed and produced right here in house using the highest quality premium cast vinyl, which is far more durable than some of the other vinyls used on the market today. In addition, our team then tests and tweaks each design on our very own cars first here at the shop, ensuring a perfect fit for your ride. When you receive the vinyl from us, you’ll notice we break the kit down into three different sections, to help make the install a little easier. One for the bumper and hood, one for the roof, and finally one for the trunk section which we have right here. Before you get started with the install, you’ll want to make sure you have a few basic tools, this includes a spray bottle filled with a soap and water mixture, a razor or exacto-knife and finally the included squeegee. If you’ve never worked with vinyl before, don’t worry, it’s really not all that hard as long as you take your time and follow the detailed instructions included with the kit. Since this is such a big job, we’re going to call it 6 hours from start to finish, just to be on the safe side. Just because Shelby didn’t release a New Edge or SN95 GT500, doesn’t mean your ride can’t don those famous stripes. So if you dig this look, be sure to check out one of our many GT500 style options right here at AmericanMuscle.com

GT500 Styling. Add impressive styling to your Mustang with a set of silver 10" wide GT500 Style Stripes from AmericanMuscle Graphics. These stripes will give your Pony the same aggressive appearance as the mighty Shelby GT500 for head-turning good looks.

Perfect Fit Guaranteed. AmericanMuscle Graphics vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

Superior Quality Materials. AmericanMuscle Graphics uses only the highest quality Premium Cast Vinyl available on the market today - designed to last at least 8 years of harsh outdoor weather. It's far more durable than our competitors' cheap, calendared vinyl film which starts to degrade in just a couple of years!

Application. These high quality AmericanMuscle Graphics silver vinyl 10" GT500 Style Stripes will fit any 1979 to 1993 Ford Mustang, including the LX, GT and SVT Cobra models.

Fitment: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 Details

What's in the Box
  • (1) Hood/Front Bumper Stripe
  • (1) Roof Stripe
  • (1) Trunk Stripe
  • (1) AmericanMuscle Instructions
  • Tools included:
  • (1) Squeege
Installation Info
Tech Specs
Specifications
  • Fits: all 1979 to 1993 Mustangs
  • Material: Vinyl
  • Color: silver
  • Hood Stripe: 104” long by 10” wide
  • Roof Stripe: 74” long by 10” wide
  • Trunk Stripe: 74” long by 10” wide
Will it fit my Mustang?
  • Foxbody - 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93

Most Helpful Reviews

5/5
Killer looking stripes

I was able to install these in a day by my self with just a pair of scissors and an exacto blade. They are a bit tricky to install, but well worth the effort...

Helpful (5)

5/5
Head turner

The black on black look the stripes gave my car gets a ridiculous amount of compliments and is just an easy thing to add to set yourself apart Be warned, most places charge $50.00 an hour for install. ...

Read More
Helpful (4)

Overall Rating 4.4 out of 5 stars
Read All 100+ Reviews

Customer Photos

You Might Also Like

70 Questions / 6 Answers

Ask a Question

Bumper to Bumper? In some of the customer photos it shows the stripes go from the bottom of the front bumper to the bottom of the rear bumper, but the description of the stripes only state HOOD, ROOF, and TRUNK (no front or rear bumper). Is there enough vinyl to cover these parts as well? Thanks!

BreW

  • All of our stripe kits will come with enough vinyl to cover bumper to bumper!

    Ricky36

Helpful (2)

Will this stripe be big enough to do the entire car from fromt bumper to rear bumper even with my gt500 rear spoiler?

Jayrap174

  • The Silver GT500 Style Stripes come with enough material to do the complete car, as well as a chin spoiler and rear spoiler.

    Rob D

Helpful (1)

I just bought a 2006 convertible Mustang. Do you have a kit for the convertible or do i buy the regular kit ?? That would leave me with 2 long top stripes. Thanks

MarcR

  • Hello! We do not have a convertible specific stripe kit. However, this will fit if you do not use the 2 top stripes.

    VincentV

Helpful (1)

I just bought a white 2009 GT500 with what looks like gloss black stripes on it and I need to replace them on the top but not anywhere else. The stripes clearly have a metallic look to them with gold and brown flecks when you look close (couple inches away). Do your "gloss black" stripes have that same metallic look or am I going to have to replace everything to get a color match?

JohnG

  • Our Black GT500 Style Stripes are a pure gloss black, with no metal flake in them.

    Rob D

Helpful (1)

I notice some GT350 stripes come with an extra thinner stripe of a different color along the sides of the primary 10in stripe, how can I get that thin stripe in red?

JordanC

  • Hello! We do offer striping kits that do have the small secondary stripe to the side, however we do not offer them in varying colors. If you are looking for something like this, I would recommend reaching out to a shop local to you that deals with vinyl to have it done perfectly!

    Doug P

Helpful (1)

Once applied, can you wax the stripes as you wax your car or will the matte black finish fade?

BobS

  • You should never wax matte finished vinyl as the oils used in wax can stain the surface of the stripes. Simple soap and water is recommended on the Matte vinyl.

    AMKody

Helpful (1)

More Products You Might Like

Customer Reviews (100+) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Full Day

Installation Cost:$100-$250

  • Fit 4.328889 4.3
  • Appearance 4.684444 4.7
  • Bang For Your Buck 4.473214 4.5



  • 5/5

    Installation Time: Full Day

    October 25, 2013

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (05-14 All)

    Killer looking stripes

    I was able to install these in a day by my self with just a pair of scissors and an exacto blade. They are a bit tricky to install, but well worth the effort...

    TomGT

    Year: 2014 Submodel: GT

    Helpful (5)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    April 20, 2013

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (05-14 All)

    Head turner

    The black on black look the stripes gave my car gets a ridiculous amount of compliments and is just an easy thing to add to set yourself apart Be warned, most places charge $50.00 an hour for install. Which can take 3-4hours

    Zachjones

    Year: 2010 Submodel: GT Daytona, fl

    Helpful (4)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    May 18, 2013

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (05-14 All)

    Great service will buy more things here

    I got the stripes a few days after ordering them. The only bad thing was that the stripes were not cut out for things like the satellite antenna. But overall the quality and service was great. My wife and i are very pleased. Have already gotten a few compliments. I had a guy who does my window tint install the stripes.

    Jmorgan

    Year: 2011 Submodel: V6 Putnam, WV

    Helpful (3)

  • 4/5

    Installation Time: Weekend

    May 21, 2012

    Review from American Muscle Graphics Blue GT500 Style Stripes - 10 in. (05-14 All)

    Take your time installing!

    These stripes are very high quality, and look great on my silver mustang, but American muscle included terrible directions, which were extremely useless. They recommend installing them at the same time, which I did on the hood, which was a nightmare waiting to happen. My recommendation for installing these is doing your research on ways people have put these stripes on, and take your time, don't rush and make sure you have a blow dryer/heat gun to work out the wrinkles and be patient. I would recommend taking off the backings of the stripes and cut them into separate pieces and on some spots on the car, like the trunk, it is nearly impossible to get them to fit the curvature of the s197 so make sure you divide them up into 2 to 3 pieces. All in all a great product from American Muscle, but the directions weren't worth the paper they were printed on.

    PatriotsReign

    Year: 2005 Submodel: V6

    Helpful (3)

  • 4/5

    Installation Time: Full Day

    January 25, 2016

    Review from American Muscle Graphics Black GT500 Style Stripes - 10 in. (15-17 All)

    7hr well worth it!

    Me and 3 of my OCD friends decided to tackle this project on my 2015 Mustang. The project took about 7hrs with lots of pulling and heating and squeegeeing. Take your time and make sure lines are even. Product takes about 1-2 weeks to settle. Finished product looks great!

    Scotty19

    Year: 2015 Submodel: Ecoboost Louisiana

    Helpful (2)

  • 4/5

    Installation Time: Full Day

    October 07, 2013

    Review from American Muscle Graphics Silver GT500 Style Stripes - 10 in. (05-14 All)

    Looks great but not for the inexperieced installer!

    Just be aware that the stripes are not cut out around anything, and are just straight stripe sections. You'll need to cut around the license plate opening and fake gas cap, and fitting around the bumpers and spoilers (mines a GT500) will drive you to self-medicate. Good thing there's extra stripe material in the kit because you'll most likely need it all. But, after all that, it changed the look on my car so dramatically that it was worth it. Good product, but lousy installation - you guys should have at least cut the license plate opening for us.

    Pilot604

    Year: 2007 Submodel: GT Arizona

    Helpful (2)

  • 4/5

    Installation Time: Full Day

    August 25, 2013

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (05-14 All)

    Striped

    Very impressed with quality of matrial used. Unfortunately kit is not pre cut for Sat antenae, license plates, rear wing or third brake light. All the trimming was very time intensive and you have to be very careful as to not cut into paint; light hand. After all, stripes looks great! Another draw back is the adhesive left stains on the black part of my rear bumper where it ran down during install that I cannot remove. If on a budget recommend this kit but if you can afford it buy a pre-cut kit; less headache, less install time, better end product.

    Cat1

    Year: 2012 Submodel: V6 Killeen Texas

    Helpful (2)

  • 5/5

    Installation Time: Full Day

    June 21, 2013

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (05-14 All)

    Well worth the effort

    I purchased the matte black for my 2012 black GT. Shipping was fast as usual for A.M. The product was quality 3M vinyl, and thankfully there was plenty extra. Overall installation wasnt bad except for the front bumper. This requires a heat gun and enormous patience, and thanks to the extra, an opportunity to redo it. Overall the matte black on black looks awesome. After the stripes, I tinted the head/driving lights, marker lights, and blacked out all the emblems.

    BrianH519

    Year: 2012 Submodel: GT Pittsburgh, PA, USA

    Helpful (2)

  • 5/5

    Installation Time: Afternoon

    May 18, 2013

    Review from American Muscle Graphics Black GT500 Style Stripes - 10 in. (94-04 All)

    Sleek, simple, sexified

    This product is a must have for anyone wanting to increase the look of their mustang without breaking budget. The price is amazing for the quality of the product. I installed it myself and it made an exceptional difference in the look of my 01. American Muscle every time!

    Beaver

    Year: 2001 Submodel: V6 New York

    Helpful (2)

  • 5/5

    Installation Time: Weekend

    April 22, 2013

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (05-14 All)

    Great product, mean look.

    I purchased these stripes along with the matching side stripes. My car is black and had red stripes and I wanted something that looked aggressive but didn't stick out from a mile away. These were just the ticket! These are the best quality vinyls available, and look phenomenal. Biggest thing is take your time installing them. Make sure they are truly dry underneath before attempting to pull off the cover sheet. For really complex areas (like the front bumper) I personally had better luck removing the cover sheet first, spraying down, floating into place, and make sure you wrap ur squeegee in a microfiber towel. A hair dryer or heat gun is 100% necessary for those type areas. Patience is required! Great product!

    ICUCNME2008

    Year: 2008 Submodel: GT Bedford, IN

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    January 18, 2013

    Review from American Muscle Graphics Blue GT500 Style Stripes - 10 in. (94-04 All)

    Race stripes

    i really liked the blue race strips on my mustang gt i gave it the little extra push to haters heads when they see me fly by

    UncleSam2009

    Year: 2000 Submodel: GT El Paso, TX, USA

    Helpful (2)

  • 5/5

    Installation Time: Afternoon

    July 27, 2012

    Review from American Muscle Graphics Silver GT500 Style Stripes - 10 in. (05-14 All)

    10" GT 500 style silver stripes

    After reading the instructions several times to completely understand the process I gave it a shot. I decided to install each stripe separate and not side by side as they come shipped. It was much easier to get them flat and concentrate on removing the air pockets and not have to worry about the other side drying. So i took my time and made sure 99.99% of the air was eliminated. It does take longer and you need to by very precise in your measurements to make sure the stripes align correctly. Good thing they give you plenty of stripe because I made a mistake on part of the hood and had to rip it off. If I did the double stripe installation I would have ruined both sides. It was difficult (if you want it perfect) to install but it looks like a million bucks now

    Sooo

    Year: 2011 Submodel: GT

    Helpful (2)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    July 09, 2012

    Review from American Muscle Graphics Silver GT500 Style Stripes - 10 in. (05-14 All)

    Silver GT500 Stripes

    I wouldn't even attempt to install these by myself. It took two pro graphic guys over 5 hours to install. Nothing is pre- cut as are some kits. Adds a lot of extra time to install cutting around tail light,gas cap emblem, license plate etc. They look great and are made of heave duty material, but be sure you know what your getting into before you attempt to install at home.

    Rondalej

    Year: 2009 Submodel: V6 Beachwood, NJ

    Helpful (2)

  • 5/5

    Installation Time: Afternoon

    May 05, 2017

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (05-14 All)

    First time success

    Watched a few videos on how to install. After one mistake I figured it out and after six hours had a great finished product on 2014 Mustang. Material was quality and looks great, took the solid race red and gave my car a complete different look. Definitely take your time, prep the surface and do this when you have daylight to work with. There was plenty of material to cover the job even if you mess up.

    CarlS

    Year: 2014 Submodel: V6

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    June 10, 2016

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (15-17 All)

    Great fit, awesome look

    Makes the yellow just stand out! The car just looks mean now. The stripes go on easy, fit well and don't take too much effort. Measure everything, cut once, and you are all set!

    EvilMerlin

    Year: 2016 Submodel: GT

    Helpful (1)

  • 1/5

    Installation Time: Afternoon

    June 10, 2016

    Review from American Muscle Graphics Red GT500 Style Stripes - 10 in. (05-14 All)

    GT500

    Great quality and they matched my originals better than the one's I purchased with my new Ram hood.

    Que

    Year: 2008 Submodel: GT500

    Helpful (1)

  • 5/5

    Installation Time: Full Day

    May 31, 2016

    Review from American Muscle Graphics Gloss White GT500 Style Stripes - 10 in. (05-14 All)

    Good quality for the price

    This is now my second time installing stripes on my 05 GT. The first stripe kit I put on my car 5 years ago (not from American Muscle) came pre-cut for each section of the car where as these stripes you have to measure and cut for each section. But for me, it was not that big of a deal to have to measure and cut. There is more than enough vinyl to leave leave a little extra on each end. For example, for the hood, you can have it wrap underneath a inch or two for a nice clean look without seeing the edge/end of the stripe. Overall I am very pleased with these stripes. They are a very nice bright gloss white and look amazing on my 05 Sonic Blue GT. You can't beat the price for the quality of these stripes.

    05SonicBlueGT

    Year: 2005 Submodel: GT

    Helpful (1)

  • 3/5

    Installation Time: Afternoon

    May 28, 2016

    Review from American Muscle Graphics Black GT500 Style Stripes - 10 in. (05-14 All)

    Product came defective

    I was very excited to have stripes installed on my car. Out of the box, I could see the stripes had some creases and a few bubbles. After trying the first install on the hood, I instantly knew this would not work. I love American Muscle and I believe this was just 1 bad egg.

    Langella7

    Year: 2014 Submodel: V6

    Helpful (1)

  • 4/5

    Installation Time: Afternoon

    May 12, 2016

    Review from American Muscle Graphics Blue GT500 Style Stripes - 10 in. (05-14 All)

    Great but

    The lengths of the stripes was generous, was my first time and I had enough to redo the hood twice. My biggest problem was they was nearly flying off in the Iowa wind. Perhaps they could be a little closers to the specs of the car?

    Gtfan

    Year: 2014 Submodel: GT

    Helpful (1)

  • 5/5

    Installation Time: Full Day

    February 23, 2016

    Review from American Muscle Graphics Matte Black GT500 Style Stripes - 10 in. (15-17 All)

    Great buy!

    I installed these stripes on my black 2016 GT PP and it came out insane with the matte black look everyone looks at my car and cant believe how sick it looks! if your thinking of buying them JUST DO IT!!!!!!!! p.s it does take some time to get it all aligned and set up you will defiantly need a full Saturday and about a 12 pack of beer.

    camarokiller

    Year: 2016 Submodel: GT florida

    Helpful (1)

Related Mustang Categories