AmericanMuscle is proud to offer FREE SHIPPING on any order over $119!
Free 2-3 Day Delivery on most items, see Product Page for details.
Free Shipping Offers are for Standard Ground Delivery Service and are only valid for shipping addresses within the 48 contiguous United States. Truck freight and oversize charges still apply unless otherwise noted, and can only be shipped to the lower 48 States.
Shipping to Alaska and Hawaii will require an additional charge.
Justin: If you're looking for an easy and inexpensive way to add a bit more detail to an otherwise dull area of your interior, then you'll want to check out SpeedForm's Carbon Fiber Style Cup Holder Trim fitting all 2015 and newer Mustangs. Now, this kit is going to feature a hydro dipped ABS plastic trim piece with that carbon fiber appearance, of course, all for right around 40 bucks. Installation's going to be a very simple peel and stick job here, guys, thanks to that pre-installed 3M tape on the back. So, therefore, figure a very soft one out of three wrenches on the difficulty meter and no more than a few minutes of your time to complete from start to finish.So, this is going to be a great bang for your buck modification to really spice up the interior of that S550. And, will of course, work great on its own or in my opinion, even better as a compliment to other carbon fiber accents you may have already added around the interior. Now, if you haven't already added other accents, but would love to see more, well, then you're certainly in the right place as we have a ton to choose from here on the site, everything from legit carbon fiber accents, for those with bigger budgets, all the way down the line to vinyl accents, for those looking to change things up, but stick to a budget. But the piece we have here, I would say is going to fall right in the middle of that spectrum. It's not real carbon fiber, but instead durable ABS plastic that has gone through a process known as hydro dipping into a carbon fiber-like graphic, which gives it a very realistic look, but for a fraction of the price of the real stuff. And honestly, guys, it's going to be very hard to tell the difference at first glance. Now, it's also worth pointing out, guys, that the quality of fitment with the SpeedForm piece is extremely good. Now, it is an overlay, meaning you're not going to totally have to uninstall the cup holder, instead, you're simply going to clean the area first and then adhere it using the preinstalled 3M tape located on the back.And with that said, this is a great time to segue into that installation. And as we pointed out earlier, this one's going to be pretty painless, guys. One out of three wrenches on the difficulty meter here, and maybe a couple minutes tops of your time factoring in the cleaning, the prepping, and so on. But to give you a better idea of how this will go down, check out our detailed walkthrough right now.Man: The tools used for this install are a microfiber cloth, interior cleaner, and a razor knife. So, the first step of this install is going to be make sure that the surface is clean and prepped. I'm going to use a little bit of interior cleaner on a microfiber cloth and wipe down the surface and make sure there's no residue or dust left behind. And now, we can peel off the 3M backing. Now, the 3M backing has been peeled off, can position it over the cup holder and apply some light pressure to adhere the tape.And that's going to wrap up this review and install of the SpeedForm Carbon Fiber Style Cup Holder Trim. Thanks for watching. And for all things Mustang, keep it right here at americanmuscle.com.
Bold, Modern Styling. A simple and effective way to add some bold, modern muscle car styling to the interior of your 2015-2023 Mustang is with a SpeedForm Carbon Fiber Style Cup Holder Surround Trim Bezel. This Trim Bezel looks great when combined with SpeedForm's other carbon fiber style interior accents. Even thought it is not real carbon fiber, this Cup Holder Surround Trim Bezel will give your S550 Mustang the luxurious good looks of carbon fiber, at a fraction of the price.
Quality Materials and Finish. SpeedForm manufactures their Cup Holder Surround Trim Bezel from an OEM quality acrylonitrile butadiene styrene (ABS) plastic using the original OEM CAD data from Ford to ensure a perfect fit. SpeedForm then completes this Trim Bezel using a special hydrographics technique for a durable, carbon fiber-like appearance.
Simple Peel and Stick Installation. No messy glue or drilling is required for installation. This Trim Bezel is designed to install simply with the pre-applied 3M doubled sided automotive bonding tape. Thoroughly clean the surface, then simply peel the 3M tape from the back of the Trim Bezel and set it firmly in place. It is just that easy.
Application. This SpeedForm Carbon Fiber Style Cup Holder Surround Trim Bezel is designed to fit all 2015-2023 Ford Mustang models.
WARNING: Cancer and Reproductive Harm - 
