Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

Steeda Lightweight Radiator Support (11-14 All)

AmericanMuscle no longer carries the Steeda Lightweight Radiator Support (11-14 All). Please check out 2010-2014 Mustang Radiators, Hoses & Accessories for an updated selection.

Features & Details

  • Stronger and Lighter Than the Stock Support
  • Tubular Chromoly Steel Construction for Strength
  • Durable Silver Metal-Flake Powdercoated Finish
  • Made in the USA
  • Fits All 2011-2014 Mustangs
Light Weight Tubular Design. Drag racers know reducing your Ponys weight results in lower elapsed times. That is why Steeda made their Mustang radiator support from tubular chromoly steel that is about half the weight of the stock steel unit and with its modern tubular design it is much stronger as well.

Steeda Quality. Steeda Engineers crafted this Mustang Radiator support from super strong light weight thin-wall chromoly steel tubing that is TIG and MIG welded for extra strength. The support is then completed in a silver metal flake powdercoated finish for a durability and good looks.

Application. This Steeda Lightweight Radiator Support is designed for use on 2011 to 2014 V6 and GT Mustangs. Will also fit 11-12 Shelby GT500.

Technical Note. The Steeda Lightweight Radiator Support completely replaces the stock radiator support assembly. It works with or without the swaybar also with or without the factory Z-brace found underneath the 2011+ GT models. Fits the OE, Steeda, or most aftermarket front swaybars.

Note: Coupon codes cannot be applied to this product.

Fitment: 2011 2012 2013 2014 Details

MPN# 555-5080

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Radiator Support
  • Installation hardware
Installation Info
Tech Specs
Will it fit my Mustang?

    Customer Photos

      Questions & Answers (1)

      1 Top Rated Question

      how much does this product weigh?

      • This radiator support weighs 14 pounds packaged.

      Helpful (0)
      Post Your Question

        Customer Reviews (6) Write a Review

        Overall Rating 4

        out of 5 stars

        Installation Time:Afternoon

        • Performance Gain 2.833333 2.8
        • Fit 4.166667 4.2

        • 3/5

          Installation Time: Afternoon

          July 11, 2018

          Juice Not Worth the Squeeze

          Looks better and is lighter than the factory junk but that's about it. It took a lot of work to get the support to line up with the Steeda sway bar I installed last year. Broke one of the x-mas tree clips for the brake line when removing it from the factory support, not that it matters since the holes don't line up with the brake line anyway. I didn't feel comfortable bending the break line to fit the holes in the Steeda support. The nylon ties to attach the splash shields were not included in the package and it is a rinky dink support method anyway.


          Year: 2012 Submodel: V6

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          March 29, 2018

          2012 Ruby

          This support is just what it says it is. Install is easy especially with a lift. Took about 35 min to install and fit was perfect. As far as performance goes unless you are replacing K-member and other front end lightweight components, you will not notice any performance gain but it looks nice.


          Year: 2012 Submodel: GT

          Helpful (4)

        • 3/5

          Installation Time: Less than 1 Hour

          January 08, 2018

          Radiator Support

          Saved me 6lbs on the front end of my 2012 mustang gt


          Year: 2012 Submodel: GT

          Helpful (4)

        • 5/5

          Installation Time: Less than 1 Hour

          April 10, 2017

          10 pounds lighter as adverised!

          There are other radiator supports out there, but Steeda's is made of chromolly and gives you the full weight reduction. I had hesitated purchasing this for 3 years now because the whole idea of securing my splash guard with zip-ties always struck me as sort of mickey-mouse. It turned out to be no big deal. There are other fasteners on the sides of the splash guard that are retained which hold it in place. You will likely only see a performance gain when installing this with other mods which also transfer more weight to the rear.


          Year: 2013 Submodel: V6

          Helpful (7)

        • 4/5

          Installation Time: Afternoon

          November 11, 2012

          Shave some weight

          Adding some mods to underside of my 2013 boss 302 that would add some weight. Did the steeda lower rad support to help offset it. I weighed the stock and the steeda support and found a difference of 10lbs. So saving 10lbs of weight off the front end with good looks was worth it. I would recommend the Steeda lower radiator support for looks, strength and weight savings.


          Year: 2013 Submodel: Boss Savannah

          Helpful (8)

        • 4/5

          Installation Time: Afternoon

          January 12, 2012

          steeda radiator support 2011 GT

          Fit was perfect. Easy install. Nice quality and very lightweight. My scales were showing a legit 32 pound drop from front if you lose the sway bar, keep the z-brace. Quality product and i like the fact the sway bar brackets are there if you decide to use them. I will try it both ways with and without!


          Year: 2011 Submodel: GT Bennett NC

          Helpful (6)

        Related Mustang Categories