(approx) 2 Hours
Simple installation for anyone.
- Mustang Rocker Stripe Installation Guide
Hey, Justin with AmericanMuscle.com here, checking out the many different rocket stripe options fitting your 94-2004 Mustang. Rocker stripes are one of those cool retro items, much like lemans stripes, that seem to find their way onto a lot of the classic Mustangs back in the day, and are just as popular on today’s Mustangs. These stripes are available in your choice of either black, white, silver, blue, red, and matte black and with several different lettering options. These styles include Mustang, Mustang GT, Cobra, GT 350, GT 500, AmericanMuscle, and plain. These stripes are constructed using only the highest quality premium cast vinyl, which is one of the most durable vinyls available on the market today. Our team then test fits each design on our own fleet of Mustangs first, ensuring a perfect fit for your ride. When installing any large piece of vinyl such as these rocker stripes, I think you’ll find patience is going to be your best tool. In addition of course you’ll need some of the basics, a spray bottle filled with soap and water mixture, the included squeegee, and finally a razor or an exacto-knife. If you take your time and follow the detailed instructions, you should be about done in about 2 hours. So whether you’re trying to emulate the classic Mustangs of the 60’s and 70’s, or you’re just looking for an inexpensive way to completely change up the look of your ride, then you’ll want to check out one of our many rocker stripe options right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 03, 2018
Love how these look on my car now that they're on. I only had one minor issue where part of the 'G' ripped right off from being so thin, but it stuck back on and doesn't look too bad. Just need to be more careful than I was! Using a hair dryer on these is a necessity after applying in my experience.Helpful (3)
May 24, 2017
Perfect little touch!
Hope they stay well but seem good quality and easy to apply. Nice to tie my white top to pacific green.Helpful (4)
August 26, 2016
Found the installation easier than I thought. was able to do it all my self with great resultsHelpful (4)
June 20, 2016
I LOVE THE LOOK!!!!!!!
This was a great addition to my mustang. It was a little bit difficult to put on straight without bubbles but as long as you're patient it'll work just fine.Helpful (4)
September 25, 2015
This is a must have for any mustang. It was a bit of a challenge to install, simply because of how perfect you want to get it, but once you get it on there it looks amazing. Favorite customization I have done on my car so far.Helpful (4)
June 16, 2015
White Rocker Stripes
These white rocker strips W/Mustang lettering really pop out and looks GREAT. I did not notice that the White Rocker Stripes also came with the wording GT when I ordered these, if so I may have ordered them . End result I love the look. No picture but my GT Convt is Performance RedHelpful (4)
June 08, 2015
relatively easy to install if you have patience and understand these sorts of things. The little squeegee was very helpful in getting the air bubbles out. It also aligned easily as it is one continuous strip of decal which you must cut yourself with a razor. If your hand isn't steady or you are not good at crafts then I would recommend you practice by using duct tape on a metal cabinet in your garage to practice making perfectly straight or evenly curved cuts. You can either cut this flush against the gap in your door or cut it back a bit like the pros do for a professional look but it up to your own taste.Helpful (5)
April 02, 2014
Mustang running Bored Double Stripe Decal
It went on so easly I give it five stars ***** BUY IT ENJOY IT .Helpful (5)
March 22, 2013
I currently own 5 Mustangs in varying years from 1966-2006. These stripes add a great look to my Mustang. My largest concern is how well they hold up after a few years of wear & tear. We'll see.Helpful (5)
January 19, 2013
A definite benefit to Mustangs
Easy application. Great price and well worth the money!Helpful (4)
Removing Factory Stripes? I have a 01 True Blue Mustang that came from the factory with the tan mustang rocker stripes. The color looks really good on the car, but my plans include hood stripes, and sadly I cannot find anything anywhere that matches the stock color, so I have decided to start at square one and go with white. I have heard horror stories of people taking vinyl off and having the paint come with it. Does anybody have any advice? I enjoy painting car parts and all, but I don't have time to repaint a door right now...
The White Rocker Stripes w/ Mustang Lettering (94-04 All) are a good choice?! The best way to remove the factory striping would be to take a hair dryer to it. The hair dryer his hot enough to make the adhesive more malleable, but not too hot as to ruin your paint. Once warmed up, you should be able to slowly peel the stripe away.
(approx) 2 Hours
Simple installation for anyone.
What's in the Box