(approx) 30 Minutes
Simple installation for anyone.
- Customer Submitted:
- How to Install Projector Headlights in your 1999-2004 Mustang
$169.00 (pair)FREE Shipping
Hey everyone I’m Justin with AmericanMuscle.com taking a look at a mod that’s sure to freshen up the look of your new edge mustang all while adding the aggressive style l and functionality of a projector headlamp. I’m talking about these chrome projector headlights for all 99-04 Mustangs. These lights feature a bright chrome housing which will help that OEM look all while adding the modern bonuses of a true projector style headlamp which will give you that focused beam of light that will greatly improve your nighttime visibility. Included in the package are both headlights which come preinstalled with H1 bulbs for your low-beams and H3s for your highs. However, since you will have these headlights out while you are installing them it wouldn’t be a bad idea to upgrade to a quality bulb from Raxiom or Sylvania. If you own a new edge Mustang but never worked on your headlights before, you’re in luck. These are by far and away the easiest headlights to work on thanks to their 2 tab mounting system, simply remove the 2 tabs holding your stock headlight in place, unplug the harness, reinstall the new headlights and you are done. It doesn’t get much easier than that and should only take you about 30 minutes. So if the headlights on your new edge mustang are starting to show their age and you want to replace them with something that still holds those OEM lines, all while adding the benefits of a modern day projector then you will definitely want to check out these chrome projector headlights for your ride.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
October 29, 2019
This would receive a five star for light output and ease of installation, however 2 months after I installed them, moisture started condensing on the inside of one light. Raxiom doesn't offer any more than a 30 day warranty so I am out of luck. Very disappointed that I'm now stuck with a defective light.Helpful (0)
September 30, 2019
Axial chrome projector headlights
Great looking headlights, super bright and easy to install, they do require adjustment which is super easyHelpful (0)
August 19, 2019
Good look bad function
Look good but can only see about 10 feet in front of you they are pointed straight down it feels likeHelpful (0)
September 03, 2018
I can see again
Easy install and the car looks 5 years newer. Would recommend to everyone.Helpful (6)
June 19, 2018
DAP headlight give us a great look and two time more light then the originaleHelpful (7)
March 14, 2018
Headlights are great
Came with very bright lights look great on the carHelpful (8)
November 02, 2017
Look nice !!
Hard to aim - compromise between hi/lo beams. takes awhile to aim - I also added some driving lights.Helpful (8)
August 29, 2017
Great Headlights for the price
Bought these head lights for my wife easy to install and she loves them.Helpful (8)
June 30, 2017
Easy install and good light
Install was less than 20 minutes. The fit is good, they look great and the lighting is definitely better than the factory set.Helpful (8)
June 13, 2017
These lights was very easy to install and gives my car a more aggressive look.Helpful (8)
I am getting condensation on the inside of the headlight. Is there anything I can do to prevent this?
Does the kit come with bulbs or need to be purchased separately?
This will come with standard bulbs.
3 questions about the headlamps: > Which way do you turn the screws to adjust up or down? > Do the lamps have to be removed to make the adjustment? > Any way to get rid of the "shake" in teh light when going over small bumps?
The screws should adjust upward for clockwise turns and downward for counter-clockwise turns. The lamps do not need to be removed, however, it may be easier to remove the housing for those with larger hands. It would be difficult to say what the "shake" is being caused by, but I would highly recommend checking wiring connection as it could be losing power when you hit bumps.
Just installed the Axial Headlights. When on low beam, they appears to be aimed too low and I can see an uneven transition from light to dark in the upper portion of the beam. Can the low beam be adjusted slightly upward?
Hi, The headlight adjustments can be made on the back of the headlight The silver screw on the top left is the high beam adjustment. The gold screw on the bottom right is the low beam adjustment
Chris J. I asked this question before. Please explain how to access the high beam bulb, The bulb is offset from the square access port by about 3 inches. These's no way I can see to get a screwdriver on the retainer clip from the side.
Hello, Chris and I checked these headlights out, you are correct in the fact that the bulb is offset from the access port. This will make it difficult but that is the only way to access the bulb. To access the high beam bulbs you must remove the headlight assembly, then remove the 4 screws that hold the square plate then you can gain access to the bulb. I do not suggest modifying these Chrome Projector Headlights modification can cause your headlights to allow water inside and void your warranty.
Hi, To access the high beam bulbs you must remove the headlight assembly, then remove the 4 screws that hold the square plate then you can gain access to the bulb. I do not suggest modifying these Chrome Projector Headlights modification can cause your headlights to allow water inside and void your warranty.
The answer is Yes and No, depends on what your definition of works is. It will work but very unlikely will it work properly. In order for an HID system to work properly inside a projector assembly the HID light and the projector housing have to be matched. Because the projector uses a lens to focus the beam the HID bulb is matched to the lens by the manufacturer at a precise distance and angle so it will not only illuminate the road in front of you but will have a precision designed cut off angle so as not to blind oncoming drivers. Easiest and safest way for you and other drivers on the road is for you to purchase the HID bulb and projector already assembled in a package, its a simple retrofit from there. Just remove the projector assembly from the original and replace it with your assembled combo and your good to go.
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box