August 02, 2010
I love these Raxiom Chrome Dual Halo Projector Headlights! Delivery time was 4 days from time of purchase. My installation time breakdown was like this: about 50~60 minutes sealing the lights with RTV Clear Silicone (including drying time), about 10 minutes removing the stock headlights, and about 5 minutes installing these new ones. Extremely easy! Makes my '03 V6 pony look fierce!
Beware though: The included instructions are OK, but they seemed to vary greatly from the video instructions on this site. Once I unpacked these lights, I discovered that the only wiring that had to be spliced in was the LEDs, but I wasn't thrilled about the instructions for splicing: "...strip...existing wire...intertwine...new...lead", blah, blah, blah. In my opinion, using suitcase connectors is a far better option than trying to strip wiring and intertwine new leads.
So here's what I ended up doing. I headed over to the local Wal-mart and picked up some RTV clear silicone for sealing. While I was there, I also picked up four 22-18 gauge wire tap splice connectors (suitcase connectors). Both of these are found in the automotive section. And, in case you don't have any, stop by the hardware section and pick up a cheap pair of pliers. You'll need them for crimping each splice.
Four wires. Four connections. Boom! You're done! Couldn't be easier! And did I mention that these lights look amazing?!?