Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $15,000!! Enter Now
Coronavirus: We are Open For Business, Prioritizing health and safety Learn More

Airaid PowerAid Throttle Body Spacer (05-10 V6)

Item 52212
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $145.39 You Save 20% ($29.08)
Our Price

$116.31 (each)

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

      Review & Installation Video

      Justin from AmericanMuscle.com, we're here with Chris Thompson from Airaid. He stopped by the shop to tell us a little more about these great Airaid products. We're very familiar with Airaid; we use them on our project cars with great success. Chris, what can you tell us about Airaid that makes it so unique? "Everything we do is digitally designed. It's engineered to fit, it's engineered to work, it's engineered to work without any special tuning. Now, tuning is much, much better. You guys offer a lot of great choices in aftermarket tuning. It'll only enhance the performance of the Mustang. We design our intakes so there's no special gluing required, there's no cutting or hacking of the engine required. If somebody decided to put a stock intake back on, they don't have to go back to Ford to buy another part to put the piece back on. Every intake we do is digitally designed. It's all about the design of the airflow and the linear charge to the throttle body. We use the rotational molding not so much for the heat soaking, but for the shape of the tube we can come up with. By using the rotational molding, it allows us to really give the right shape and form to make sure the product works well." We're very excited—we've got our 2013 Mustang here, probably not even 10 miles on this thing yet, and we already have an Airaid intake on it. Tell us a little more about that. "This is awesome. We're really excited to be here today. This is the first Airaid intake on a 2013 Mustang. We're really excited to be here with you guys. As you can see it fits. We know for sure it fits. We believe we have a hit. We'll do a little bit more testing on it before we release it to the public, but that should happen anytime now." Now, you were telling me earlier, you're working with some legends in the Mustang world. "Well, we're excited about working with Parnelli Jones and his son PJ. Parnelli's been instrumental in helping us come along with the Boss 302 intakes we're trying to develop. Nobody knows the heritage of the Boss 302 better than Parnelli Jones. We worked with PJ on the side by side utility vehicles (Razors, Rhinos, and TRX's). We also sponsored him in the past on his endeavors in the American Le Mans Series, which he ran last year." Chris, thank you so much for educating us on your great Airaid products. And as always, you can find those great Airaid products right here at AmericanMuscle.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • The Sound of Power... the “Whistle” Means Its Working!
      • Improves Throttle Response and Low End Torque
      • Improves Fuel Economy
      • Unique "Helix Bore" Design
      • Red Anodized Billet Aluminum
      • CARB EO Number: D-609-3
      • Includes Hardware, Gasket & Instructions
      • Fits 2005-2010 V6 Mustangs

      Description

      More Power, Better Throttle Response. This easy to bolt-on PowerAid spacer from Airaid was developed to improve throttle response and to unleash the hidden low to mid range torque from your Mustang's engine, with tremendous torque gains seen between 800 to 2500 RPM.

      Improve Fuel Economy. The Airaid Poweraid Throttle Body Spacer not only improves the power and performance of your Mustang, but with its unique “Helix Bore” design it also maximizes fuel efficiency saving you money at the gas pump. The Helix Bore creates a spinning action to the incoming air to provide superior atomization of the air fuel mixture for better combustion.

      Billet Aluminum Construction. CNC machined from the highest quality aircraft grade 6061-T6 billet aluminum the Airaid Poweraid Throttle Body Spacer is anodized in a red finish for great under styling and includes all the necessary hardware and instructions for a simple straightforward installation.

      CARB Certified. Best of all this Airaid Throttle Body Spacer is 50-state smog legal under Carb EO# D-609-3.

      Application. The Airaid Poweraid Throttle Body Spacer is designed to fit 2005 to 2010 4.0L V6 Mustangs with a factory throttle body.

      Note: Coupon codes cannot be applied to this product.

      Fitment: 2005 2006 2007 2008 2009 2010 Details

      MPN# 450-613

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      4.3

      Customer Reviews (70)

      Write a Review

      Ratings Summary

      4.3 out of 5 overall rating from 70 customers

      Installation Time: Less than 1 Hour





      • March 24, 2020

        5 2006 V6 - Fernandostorm Installation Time: Less than 1 Hour

        AIRRAID SPACER

        Easy installation. sounds like I installed a turbo. Didn't notice any power gains. Acceleration is a bit better.

        Helpful (0)
      • March 03, 2020

        5 2008 V6 - Daniel Installation Time: Less than 1 Hour

        Can feel the difference

        Works great and sounds really good. You can feel the difference when stepping on it.

        Helpful (0)
      • January 03, 2020

        4 2007 V6 - Kfowler030719 Installation Time: Less than 1 Hour

        Spacer

        Works great and sounds great. Mine didn’t come with a logo though.

        Helpful (0)
      • December 14, 2019

        5 2010 V6 - Nicholasv6 Installation Time: Less than 1 Hour

        Great buy

        I honestly thought I wouldn’t price the difference with this spacer but honestly it sounds great. I have a v6 2010 4.0 and when I first put it on and went for a drive I heard like a little whine almost like a tiny supercharger. Overall great product

        Helpful (1)
      • September 27, 2019

        5 2007 V6 - Paloma Installation Time: Less than 1 Hour

        Good

        Works good, helped a little on gas mileage when you combine it with a cold air intake

        Helpful (0)
      • August 30, 2019

        2 2005 V6 - SGVA Installation Time: Less than 1 Hour

        It fit - barely

        This was installed on a 2005 V6. The wiring harness on the throttle body must be stretched after installing this item. Not the best situation for fourteen year old wires, but it does reach. Installation was simple. In reference to performance, I’ve noticed no better mpg, there is no different sound to the engine, and there is no noticeable power or responsiveness. But it does look nice. A note on delivery: this item took a bit over a week to be shipped across the US. Upon arrival I received a used item.

        Helpful (0)
      • June 13, 2019

        4 2009 V6 - MatthewD Installation Time: Less than 1 Hour

        Throttle Body Spacer

        I found the product easy to install. I did have a little issue because of the cool air intake I had previously installed. The cool air intake had to be adjusted in position because the TB spacer moved it forward. I could feel a better throttle response and could hear the air rushing to the engine. I was very pleased over all. My next step is a tuner.

        Helpful (1)
      • May 15, 2019

        4 2008 V6 - PONY Installation Time: Less than 1 Hour

        body spacer

        Product fit and was easy to install, only make sure to install gasket and the side that it mark TB (throttle body)

        Helpful (0)
      • May 03, 2019

        3 2006 V6 - EricH Installation Time: Less than 1 Hour

        More bottom end and a little better mileage

        Easy to install. Gave me a little more on the bottom end Gave me a little better gas mileage Negative is that there is a little whine when under light acceleration, step on the accelerator more and it goes away

        Helpful (0)
      • January 23, 2019

        2 2006 V6 - JoelE Installation Time: Less than 1 Hour

        Not the performance I was expecting

        It's an OK product. It came with instructions and was packaged pretty well. It also was pretty easy to install it and it looks great on the car. It is kind of hard to know which orientation it is supposed to be in on the car. But I saw no performance Increase, or any increase in throttle response. The whistle that it's supposed to make was kind of annoying to me, but mine may have just been a fluke in the way it was made. But honestly you would be better off spending your money on a cold air intake or a performance throttle body in my opinion.

        Helpful (3)

      Questions & Answers (23 answers)

      5 Top Rated Questions

      The Whistle So, I've heard mixed reviews about the 'whistle' sound this spacer makes. Honestly, is it annoying like your belt is squeeking or is it a turbo type that sounds cool?

      • Personally, I love the whistle this part creates. In my opinion, it sounds more like a turbo whistle than anything else. When you're cruising, the sound kind of fades into the background, but you really hear it when you punch the throttle, especially between 2000-3500 RPM (in my case).

      Helpful (8) Show 4 more answers

      so I cannot use if I buy the 70mm Sr or BBK throttle body?

      • Correct. The Airaid Poweraid Throttle Body Spacer is only made for use with the stock throttle body.

      Helpful (3)

      I know the website states that it will only work with the stock throttle body, but there's at least one customer photo of the spacer in use with the BBK 70mm. Soooo?

      • The Airaid Poweraid Throttle Body Spacer is specifically designed to work with the stock throttle body. It is not designed to bolt to an aftermarket throttle body.

      Helpful (1)

      I have a BBK cold air intake, can I use the spacer with it?

      I recently installed this on my 2007 V6 but I hear more of a hiss than a whistle and I’ve lost nearly 2mpg since installing this. Any tips or ideas on what could be the issue ? I followed installation to the letter.

      • Try checking the gasket for any damage, as well as ensuring the bolts are tightened completely.

      Helpful (0)
      10 More Questions
      Can I use this with my bbk 70mm throttle body 1 answer
      What would be better to pair with an Airaid CAI, this spacer or the BBK 70mm throttle body when going for performance? 1 answer
      I just got a new cold air intake would u recommend a spacer ? 1 answer
      How big length wise are the bolts that come with the spacer? 1 answer
      What are the bolt specs...i lost mine and need to replace them 1 answer
      how much horspower gain do get from this ?? 1 answer
      what is the recommended ft-lbs of torque required for the bolts that connect the assembly? 1 answer
      When I installed the throttle body spacer on my 05 V6 I noticed that it really strained the wires connecting the throttle body (there's no slack left). Is there a way to relieve the tension on the wires caused by the installation of the throttle body spacer? 1 answer
      i own a airaid and love it but how big is the bore for this spacer ? 1 answer
      Can I use this with a aftermarket air intake? 1 answer

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Poweraid Spacer
      • (1) Fiber Gasket
      • (4) Bolts
      • (4) Flat Washers

      Tech Specs

      Will It Fit My Mustang

      • V6 - 05, 06, 07, 08, 09, 10

          Related Mustang Categories