Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win Any Wheel & Tire Package! Enter Daily

BBK Cold Air Intake (03-04 Cobra)

Market Price $396.99 You Save 12% ($47.00)
Our Price

$349.99

FREE Shipping

  • Item 56076
  • MPN# 1725

Will this fit your Vehicle?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features & Details

    • Improves Horsepower and Acceleration.
    • Money Saving Reusable Filter.
    • Bright Chrome Finish.
    • Simple Installation.
    • CARB EO Number: D-245-14
    • Fits 03-04 SVT Cobra Mustangs.
    • No Tune Required
    Improves Horsepower. The BBK Cold Air Intake kit completely replaces your 2003-2004 Supercharged Cobra mustangs restrictive factory air box and paper filter element with a high flow BBK filter assembly for a noticeable increase in horsepower and acceleration while providing filtration of harmful power robbing dust particles. The BBK CAI pulls cooler denser air from inside the fender well to make more power that you can feel.

    Reusable Filter. BBK designed the high flow cotton air filter to be reusable. So no need to go out and buy a new filter every few thousand miles. Just clean the filter, re-oil it, save money, and go!

    Bright Chrome Finish. The BBK CAI not only improves your Cobra's horsepower and acceleration, but improves your mustangs under hood appearance with a strikingly beautiful chrome finish. You'll be sure to attract attention at all the car shows with this jewel under the hood.

    Simple Install. The BBK Cold Air Intake kit is designed to install easily with basic hand tools. No extra modifications or special tools are required for the installation. See the convenient video below for a basic overview of the installation process.

    Fitment: 2003 2004 Details

    CA Residents: Warning: California's Proposition 65

    What's in the Box
    Hardware included:
    • (4) Four Bolts
    • (2) Two Screws
    • (4) Four Nuts
    • (1) One Large Grommet
    • (1) One Small Grommet
    • (2) Two Grommet Studs
    • (4) Four Hose Clamps
    • (2) Two Rubber Hose Connectors
    Installation Info

    Installation Time: (approx) 1 Hour

    Difficulty Level:Simple installation for anyone

    Installation Guides:

    Tech Specs
    Cold Air Intake Specifications
    Year/Model: 03-04 Cobra Filter Placement: Inside Fender
    Material: Steel Finish: Chrome
    Manufacture: BBK Computer Tune Required: No
    Will it fit my Mustang?

    You Might Also Like

    Customer Photos (8) Submit Your Photo

    View All 8 Photos

    Questions & Answers (4)

    4 Top Rated Questions

    Do I also need the MAF sensor? My cobra is pulley'd, tuned, 3.73 gears. Other mods but not relevant to the engine.

    • The BBK Cold Air Intake will reuse your factory MAF sensor. You can absolutely upgrade your MAF sensor if you would like but it not required.

    Helpful (0)

    Will the BBK fit a 2003 Cobra with a strut tower brace?

    • The BBK Cold Air Intake will not fit an 03 Cobra with a Strut Tower Brace.

    Helpful (0)

    Does this work with a Whipple supercharged Cobra? I have a 2004 Cobra with a Whipple 2.3 supercharger and a JLT intake. I like the chrome look a lot better and the fact the filter goes into the fender but wasn't sure if it will fit. Thanks for any help.

    • This BBK Cold Air Intake (03-04 Cobra) is designed to work with the stock eaton blower. To work with the Whipple supercharge may require some modification.

    Helpful (0)

    Does this intake require a tune? I have a 2003 cobra. it is 100% stock. If i were to get this intake, would i need a tune?

    • No you won't need a tune you can run it just as that because it looks like a beauty but if you want to get all the hp from your intake i would definitely recommend a tune

    Helpful (0) Show 2 more answers
    Post Your Question

    People Who Bought This Item Also Bought

    Customer Reviews (9) Write a Review

    Overall Rating 4.7

    out of 5 stars

    Installation Time:Afternoon

    Installation Cost:$100-$250

    • Performance Gain 4.5 4.5
    • Fit 4 4



    • 4/5

      Installation Time: Afternoon

      March 16, 2018

      2003 mustang cobra

      After installing it I was happy..let me talk to you about during tho.. I cussed and wanted to beat up anything in front if me..silicon hoses were not fitting. I had to throw them in my microwave to lessen them up battles with it for at least an hour.. That's just trying to put the hoses on the intake. It was a nightmare. I would not but it again due to this fact. Of hoses fit better it would have been a 30min install..

      MartinG

      Year: 2003 Submodel: Cobra

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      March 30, 2017

      Worth it!

      It took me a while to figure out how to put the shield on but looks clean easy to install and makes it sound nice!

      LauroCobra

      Year: 2004 Submodel: Cobra

      Helpful (5)

    • 4/5

      Installation Time: Afternoon

      May 23, 2014

      YOU CAN NOTICE THE POWER GAIN

      Right when you install it and go for a drive you will notice the power gain. This intake will also make the supercharger louder on a cobra which is awesome. Overall it's worth the money and it is better if combined with a custom tune.

      roop27

      Year: 2003 Submodel: Cobra Vancouver, BC, Canada

      Helpful (4)

    • 4/5

      Installation Time: Afternoon

      November 22, 2013

      BBK Cold Air Intake (03-04 Cobra)

      I find this product to be a good buy. I did notice it was an open box item. There are a couple of fine scratches in the polished chrome. The Silicone boot on the Throttle Body like to slip off, I believe its due to being sized for a 90 MM Throttle body. It sounds and looks great. Mario

      Willan

      Year: 2003 Submodel: GT Ajax, ON, Canada

      Helpful (5)

    • 5/5

      Installation Time: Less than 1 Hour

      August 26, 2013

      AMAZING PRODUCT

      The BBK cold air intake is by far the easiest way to gain about 20 horsepower. The intake fits the car perfectly and the install is a breeze. The price of the intake is also a hige plus compared to all the others. The intake also makes the engine bay look very very nice.

      Idilio

      Year: 2003 Submodel: Cobra New jersey

      Helpful (6)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      October 20, 2012

      Just what a Cobra needs

      Bought this as well as x cat exhaust and a chip. All was shop installed for under 500. Most bang for the buck I have received with car shopping. Called with questions while ordering and received most of my answers. Only fault was that x cat did not arrive with exhaust set up and had to buy that. Took 2 more days.

      Freebirdintl

      Year: 2004 Submodel: Cobra Tequesta, FL, USA

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      October 05, 2012

      best intake ever!!!

      this is the best intake ever i use to have a k&n intake and my supercharger was only getting hot air and i was losing a lot of horse power but now my horse power improve more than 17hp

      tropacid

      Year: 2003 Submodel: Cobra Puerto Rico

      Helpful (4)

    • 5/5

      Installation Time: Less than 1 Hour

      April 27, 2012

      BBK CAI

      Looks great! A definite increase in power and really adds to the show condition of the engine bay. This is a must have! Perfect fit on my red convertable 2003 cobra! Thanks guys!

      Joublanc

      Year: 2003 Submodel: Cobra Houston, TX

      Helpful (4)

    • 5/5

      February 11, 2011

      BBK +++!

      I bought this from American Muscle awile ago. Not only does it look great and adds good power it also saved my engine. The filter sucked up water without me realizing it and ruined the filter and ended up rusting the angled inlet tube, but all of the water was sucked out in the intake tube before it reached my throttle body! Great product. Would reccoment to anyone with a Cobra.

      Tim

      Helpful (6)

    Related Mustang Categories