Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
Every day 8:30AM EST - 11:00PM EST
Win 1 of 3 Exhaust Kits! Enter Daily!

BBK Cold Air Intake (99-01 Cobra)

AmericanMuscle no longer carries the BBK Cold Air Intake (99-01 Cobra). Please check out 1999-2004 Mustang Cold Air Intakes for an updated selection.
This item currently can not be added to your cart. Please try again later.

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.

Features & Details

  • Improves Horsepower and Acceleration.
  • Money Saving Reusable Filter.
  • Bright Chrome Finish.
  • Simple Installation.
  • CARB EO Number: D-245-14
  • Fits 99-01 SVT Cobra Mustangs.
  • No Tune Required
Improves Horsepower. The BBK Cold Air Intake kit completely replaces your 1999-2001 Cobra mustangs restrictive factory air box and paper filter element with a high flow BBK filter assembly for a noticeable increase in horsepower and acceleration while providing filtration of harmful power robbing dust particles. The BBK CAI pulls cooler denser air from inside the fender well to make more power that you can feel.

Reusable Filter. BBK designed the high flow cotton air filter to be reusable. So no need to go out and buy a new filter every few thousand miles. Just clean the filter, re-oil it, save money, and go!

Bright Chrome Finish. The BBK CAI not only improves your Cobra's horsepower and acceleration, but improves your mustangs under hood appearance with a strikingly beautiful chrome finish. You'll be sure to attract attention at all the car shows with this jewel under the hood.

Simple Install. The BBK Cold Air Intake kit is designed to install easily with basic hand tools. No extra modifications or special tools are required for the installation. See the convenient video below for a basic overview of the installation process.

Fitment: 1999 2001 Details

CA Residents: Warning: California's Proposition 65

What's in the Box
Hardware included:
  • (4) Four Bolts
  • (2) Two Screws
  • (4) Four Nuts
  • (1) One Large Grommet
  • (1) One Small Grommet
  • (2) Two Grommet Studs
  • (4) Four Hose Clamps
  • (2) Two Rubber Hose Connectors
Installation Info

Installation Time: (approx) 1 Hour

Difficulty Level:Simple installation for anyone

Installation Guides:

Tech Specs
Cold Air Intake Specifications
Year/Model: 99-01 Cobra Filter Placement: Inside Fender
Material: Steel Finish: Chrome
Manufacture: BBK Computer Tune Required: No
Will it fit my Mustang?

You Might Also Like

Customer Photos (10) Submit Your Photo

View All 10 Photos

Questions & Answers (5)

5 Top Rated Questions

Will this intake work on a 2001 Bullitt????...... because they do have the same in intake and plenum.... Thanks.

  • The BBK Cold Air Intake is specially designed for the 99-01 Cobras. We cannot guarantee fitment on a Bullitt.

Helpful (0)

Does the filter need to be oiled?

  • The filter included in this kit is an oiled filter. After you clean it, you will need to re-oil it.

Helpful (0)

Does this package come with a MAF? Thanks.

  • Hello! The BBK Cold Air Intake does not come with a MAF Sensor or MAF Housing.

Helpful (0)

I have been looking around for a bbk CAI for my mach 1. I have read around that the 99-01 cobras use the same size intake as the mach 1 so would this CAI fit an 03-04 mach 1?

  • Hi, We cannot guarantee fitment of this BBK Cold Air Intake on a Mach 1

Helpful (0)

what are the specific gains with this intake? horsepower? torque?

  • Just buy bolting this intake up to your car, you can be looking at an increase of 5-10hp across your power curve. If you have your car tuned after installation you can be looking at even more horsepower.

Helpful (0)
Post Your Question

Customer Reviews (15) Write a Review

Overall Rating 4.5

out of 5 stars

Installation Time:Afternoon

Installation Cost:0-$100

  • Performance Gain 4.25 4.3
  • Fit 3.833333 3.8

  • 5/5

    Installation Time: Afternoon

    February 13, 2018

    looks amazing

    After installed,,, the different more power better sound.. very nice piece.


    Year: 2001 Submodel: Cobra

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    December 07, 2017

    Great product

    This is the cold air you want for your engine! Highly recommended


    Year: 2001 Submodel: Cobra

    Helpful (2)

  • 4/5

    Installation Time: Less than 1 Hour

    May 03, 2017

    easy install

    straightforward, took 15 minutes. to knock out. noticed a difference on the 1st drive out.


    Year: 2001 Submodel: Cobra

    Helpful (2)

  • 5/5

    Installation Time: Afternoon

    February 20, 2017


    This is a pretty good product, I can tell a difference in the car. I ordered this with the BBK 65mm throttle body and I can feel it. Installation was pretty difficult on the 99 cobra, just didn't want to go together easily, but if you take your time it's well worth it.


    Year: 1999 Submodel: Cobra

    Helpful (3)

  • 5/5

    July 19, 2016

    awesome product

    frees up those ponies and lets really lets it breathe


    Year: 2001 Submodel: Cobra

    Helpful (3)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    May 27, 2014

    Notable Increase in performance

    There is a notable increase in the performance and response of my 2001 Cobra with the installation of this cold-air intake.


    Year: 2001 Submodel: Cobra Bastrop, TX 78602, USA

    Helpful (6)

  • 5/5

    Installation Time: Afternoon

    January 26, 2014

    COOOOL air induction

    I was impressed with the unit right out of the Box! Very well constructed and a very impressive addition to my engine bay. With winter storage holding back on my stangs reins. I cant wait to get out this spring and see the gains in horsepower as advertised.... dredded cold .....


    Year: 2001 Submodel: Cobra Illinois, USA

    Helpful (2)

  • 5/5

    Installation Time: Less than 1 Hour

    January 25, 2014

    BBK cold air intake

    This is an excellent product. Shipping was fast and free. It really add a nice look for my 99 cobra. Another great buy from American Muscle.


    Year: 1999 Submodel: Cobra Ohio

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    April 18, 2013

    Easy to do

    This was super easy to install the hardest part was putting the filter on…you will need to jack the car up and have a very long screw driver to reach. I can feel the difference in low end power and it looks great.


    Year: 1999 Submodel: Cobra

    Helpful (2)

  • 3/5

    Installation Time: Less than 1 Hour

    January 21, 2013

    Power Gains and Looks!

    I like the way this intake looks, and I could immediately feel a difference in power after installing the intake. The fitment was good but the pipe that connects to the mass airflow sensor wasn't a very good seal and it had to be sealed up. Overall I would recommend this product, the gains are worth it and the option for the upgraded mass airflow sensor was the deal breaker for me


    Year: 2001 Submodel: Cobra North Carolina

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    October 11, 2012

    Easy install

    The intake was fairly easy to install, just have to remove your old MAF from your old system, again easy ( just four bolts). For those that hear nicking against the engine bay it us probably because they didn't use the thin strip of rubber supplied around the intake mount, which wasn't very clear in the instructions. One thing you do need to be careful if is that the CARB sticker is not already attached but is in a package in the box, so be careful those worried about smog. The only difficult part is getting the filter on, and that is only because it goes in the fender well. Just undo the bottom screw on the fender and you will have enough room.also the breather tube from the valve cover wants to slide off of the new intake, so you might want to get a small hose clamp to hold it in place. Over all good buy and looks great!


    Year: 1999 Submodel: Cobra Yuba City, CA, USA

    Helpful (3)

  • 4/5

    Installation Time: Afternoon

    November 30, 2011

    BBK Intake

    Good power gains and throttle response but shakes and knocks against the passenger side strut tower at WOT could have been designed better but other than that good product


    Year: 2001 Submodel: Cobra TX

    Helpful (4)

  • 1/5

    Installation Time: Afternoon

    November 19, 2011

    Doesnt Fit!!

    This piece of junk did not fit correctly. I ensured this was the correct intake for my car, but the measurements were off which made installation more difficult than it should be.


    Year: 1999 Submodel: Cobra

    Helpful (4)

  • 5/5

    March 31, 2011


    I enjoyed this item. U will be able to tell big different in horsepower. And it was very easy 2 install. It only take about 10min.

    Quincy Bennett

    Year: 2001 Submodel: Cobra

    Helpful (4)

  • 5/5

    August 30, 2009

    cobra install

    Great product, easy install. One note: put a little dish washing soap on groments for an easier install


    Helpful (5)

Related Mustang Categories